Overclock.net › Forums › Intel › Intel Motherboards › GIGABYTE Z77X Owners/Discussion/Information/Support Thread and Club (UD5H, UD3H, D3H, and ALL)
New Posts  All Forums:Forum Nav:

GIGABYTE Z77X Owners/Discussion/Information/Support Thread and Club (UD5H, UD3H, D3H, and ALL) - Page 217

post #2161 of 6656
Quote:
Originally Posted by Sin0822 View Post

hey so can I ask why you just don't use the GB ports? So it isn't the motherboard or the GB bracket, it is your case's I/O?
Try what Yor_ said.
You are no help unless you can lit your system specs, all of them. I mean are you using a Z77MX-D3H or a UD5h? What CPU? What memory?
No the OC would be the same smile.gif I can tell you from experience that the OC should be no different. VRMs already are overkill. Perhaps VRm might be more efficient or cooler.
this


Z77x-UD5 (F8 bios)
i7 2600K @ 4.8GHz
OCZ ZT750 Watt PSU
16GB samsung green 1866 9 9 9 27 1T 1.45v
ocz 120gb vertex 3
Samsung F4 2TB
Seagate 3TB
Gigabyte gtx 680 OC

Sin irfy from xtreme forums just thought id post here as more users here.
Its the same issue i reported months ago. tried increasing imc + vtt 0.005 like you said seemed to work.. Then just randomly sometimes it dont start 1st time...system auto off's 4 times then starts like nothin happen. I dont have any other issues besides this. When it boots it works solid just annoying that PC ON's n OFF's 4 times. (Not all the time) before on prev bioses the ddr voltage used to go back to 1.5v now it doesnt with F8. I flashed my backup bios to F8 aswell (using Alt + F10 method)
do both bioses have to be synched in any way??
post #2162 of 6656
Thread Starter 
I will look into it again with sandy bridge.
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
post #2163 of 6656
I'm not sure whether i'm posting in the right thread or not. please let me know if i post in the wrong thread. There is question for me to ask:-

Have anyone try to over clock ati graphic cards? when i open easy tune 6, my graphic tab gray out. And also, when i try to use catalyst to overclock it, the "performance" tab has disappeared after i click on "accept".

simply, it means the system not allow me to overclock/ alter my graphic card clock speed. have anyone experiences these situation before? please help me.

Note: Previously, i tried to use the catalyst setting to overclock my GPU in my friend's computer and it works. wondering why it won't allow me to overclock in my current rig.

my PC specs:
Motherboad: GA-z77X-D3H
CPU: i5 3750k
GPU: ATI HD 4830






573

573

573

528
post #2164 of 6656
anyone tried the msata ssd on these boards?
any real life benefits compared to normal ssd?
post #2165 of 6656
Thread Starter 
just use your GPU's OC program, or something like afterburner.
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
post #2166 of 6656
Wondering if anyone else has a WB version of the board. I can't seem to get the system to recognize the WiFi card. I have plugged it in properly, and the USB cable is indeed plugged into F_USB1 as per the instructions. Is there a way to test if it's a dud card ?
post #2167 of 6656
Quote:
Originally Posted by Sin0822 View Post

...so if you put in your GPu and one of the RAID cards, it works? There is no physical way you can use both of them at the same time, and that isn't the boards fault, it is Intel's fault for only providing 16x PCI-E lanes.

When I said both cards were detected separately, I was referring both RAID cards are detected when they are ALONE in the system. With VGA PEG OUT

If I put the VGA back to first PCI-E slot and only one RAID card on slot 2 PCI-E then system will be in "Mode 2" 8x+8x, right ? It should work, right?
But it doesn't.
When VGA is in the system, raid card not detected.
Quote:
Originally Posted by s4e8 View Post

How about set PCI-E mode to PCI-E 2.0 only?
I test all three slot and work fine:
1st slot: dGPU at PCIE-2.0 16x card at 8x.
2nd slot: highpoint RAID PCIE-2.0 8x card at 4x
3rd slot SiI 3132 SATA card PCIE-1.0 1x

How do I do that? What BIOS setting change that?
My Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3770k Gigabyte ga-z77x-ud5h MSI HD7850 Gskill 2x4gb 1600 CL7 
Hard DriveCoolingOSKeyboard
Samsung SSD 830 128 gb Noctua NH-D14 Windows 7 Ultimate 64 bits Steelseries 7G 
PowerCase
LC Power Archangel 850w Lian Li v1000 
  hide details  
Reply
My Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3770k Gigabyte ga-z77x-ud5h MSI HD7850 Gskill 2x4gb 1600 CL7 
Hard DriveCoolingOSKeyboard
Samsung SSD 830 128 gb Noctua NH-D14 Windows 7 Ultimate 64 bits Steelseries 7G 
PowerCase
LC Power Archangel 850w Lian Li v1000 
  hide details  
Reply
post #2168 of 6656
Thread Starter 
Quote:
Originally Posted by Mabs View Post

When I said both cards were detected separately, I was referring both RAID cards are detected when they are ALONE in the system. With VGA PEG OUT
If I put the VGA back to first PCI-E slot and only one RAID card on slot 2 PCI-E then system will be in "Mode 2" 8x+8x, right ? It should work, right?
But it doesn't.
When VGA is in the system, raid card not detected.
How do I do that? What BIOS setting change that?

try to see if you install the 4x card into the last port with the GPu in the first slot whether or not it works.

You can change PCI-E mode through the miscellaneous menu in MIT
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
post #2169 of 6656
Quote:
Originally Posted by Sin0822 View Post

try to see if you install the 4x card into the last port with the GPu in the first slot whether or not it works.
You can change PCI-E mode through the miscellaneous menu in MIT
I tried several combinations and none worked:

With Raid Card LSI 9260-8i:
GPU 1st slot + raid 2nd --> Not working
GPU 1st slot + raid 3rd --> Not working
GPU out of system + raid 1st --> working
GPU out of system + raid 2nd --> working
GPU out of system + raid 3rd --> not working

With Raid Card LSI 8204elp:
GPU 1st slot + raid 2nd --> Not working
GPU 1st slot + raid 3rd --> Not working
GPU out of system + raid 1st --> working
GPU out of system + raid 2nd --> not working
GPU out of system + raid 3rd --> not working

The BIOS setting "PEG (GEN3) slot configuration" doesn't change this behavior. Tried "AUTO"; "GEN3", "GEN2" and "GEN1"... no effect at all.
I'm sure this is BIOS related. And I hope Gigabyte corrects this in next Beta BIOS...
My Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3770k Gigabyte ga-z77x-ud5h MSI HD7850 Gskill 2x4gb 1600 CL7 
Hard DriveCoolingOSKeyboard
Samsung SSD 830 128 gb Noctua NH-D14 Windows 7 Ultimate 64 bits Steelseries 7G 
PowerCase
LC Power Archangel 850w Lian Li v1000 
  hide details  
Reply
My Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3770k Gigabyte ga-z77x-ud5h MSI HD7850 Gskill 2x4gb 1600 CL7 
Hard DriveCoolingOSKeyboard
Samsung SSD 830 128 gb Noctua NH-D14 Windows 7 Ultimate 64 bits Steelseries 7G 
PowerCase
LC Power Archangel 850w Lian Li v1000 
  hide details  
Reply
post #2170 of 6656
Not bad for a 3450 right?! What kinda passmark scores are you guys getting with your rigs?

457
Silent Devil
(14 items)
 
  
CPUMotherboardGraphicsRAM
Core i5 3450 @ 3.97Ghz Gigabyte GA-Z77M-D3H XFX GTX 285 CORSAIR Dominator 4x2 8GB 
Hard DriveOptical DriveOSMonitor
2 WD5002ABYS-01B1B0 500GB in RAID 0 (1TB) GH22NS30 Windows 7 Ultimate 64bit SP1 1440x900 
KeyboardPowerCaseMouse
Logitech OCZ Modular Extreme 700W NZXT H2 Dell Generic USB 
Mouse PadAudio
X-TRAC Pro Creative Soundblaster Titantium HD. Foobar WAS... 
  hide details  
Reply
Silent Devil
(14 items)
 
  
CPUMotherboardGraphicsRAM
Core i5 3450 @ 3.97Ghz Gigabyte GA-Z77M-D3H XFX GTX 285 CORSAIR Dominator 4x2 8GB 
Hard DriveOptical DriveOSMonitor
2 WD5002ABYS-01B1B0 500GB in RAID 0 (1TB) GH22NS30 Windows 7 Ultimate 64bit SP1 1440x900 
KeyboardPowerCaseMouse
Logitech OCZ Modular Extreme 700W NZXT H2 Dell Generic USB 
Mouse PadAudio
X-TRAC Pro Creative Soundblaster Titantium HD. Foobar WAS... 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › GIGABYTE Z77X Owners/Discussion/Information/Support Thread and Club (UD5H, UD3H, D3H, and ALL)