Overclock.net › Forums › Intel › Intel Motherboards › GIGABYTE Z77X Owners/Discussion/Information/Support Thread and Club (UD5H, UD3H, D3H, and ALL)
New Posts  All Forums:Forum Nav:

GIGABYTE Z77X Owners/Discussion/Information/Support Thread and Club (UD5H, UD3H, D3H, and ALL) - Page 257

post #2561 of 6656
Thread Starter 
Quote:
Originally Posted by Blast View Post

Yeah, I updated my post and mentioned what all I have tried.
"Tried each stick individually in all slots and have reset my CMOS."
sometimes memory is defective. more times than not it is. however can you help me out and tell me what happens when you try each stick on its own? It wont boot up at all? you cannot get into the BIOS? ONot even with 1 stick in the last slot furthest away from the CPU? or the slot second from the CPU?
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
post #2562 of 6656
Quote:
Originally Posted by Sin0822 View Post

sometimes memory is defective. more times than not it is. however can you help me out and tell me what happens when you try each stick on its own? It wont boot up at all? you cannot get into the BIOS? ONot even with 1 stick in the last slot furthest away from the CPU? or the slot second from the CPU?

Nope. Both of the sticks give the same result. All possible combinations result in error 53. I even checked the pins on the CPU socket (all of which were fine).
The Beast 2.3
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 2700k ASRock Extreme6 Z77 nVidia EVGA GTX 670 G.Skill Ripjaws X (16 gb) 
Hard DriveHard DriveOptical DriveCooling
WD Caviar Black 1tb 7200rpm Vertex 4 (128 GB) Raid 0 LG Bluray Burner (WH14NS40) XSPC Rasa 750 RX 360 kit (push/pull + shrouds) 
OSMonitorKeyboardPower
Windows 7 Ultimate (64-bit) LG IPS235V (2x) MK550 Antec Quattro 1200 
CaseMouseAudio
Rosewill RSV-L4000 Logitech G700 HT Omega Claro II 
  hide details  
Reply
The Beast 2.3
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 2700k ASRock Extreme6 Z77 nVidia EVGA GTX 670 G.Skill Ripjaws X (16 gb) 
Hard DriveHard DriveOptical DriveCooling
WD Caviar Black 1tb 7200rpm Vertex 4 (128 GB) Raid 0 LG Bluray Burner (WH14NS40) XSPC Rasa 750 RX 360 kit (push/pull + shrouds) 
OSMonitorKeyboardPower
Windows 7 Ultimate (64-bit) LG IPS235V (2x) MK550 Antec Quattro 1200 
CaseMouseAudio
Rosewill RSV-L4000 Logitech G700 HT Omega Claro II 
  hide details  
Reply
post #2563 of 6656
Thread Starter 
RMA it then. Did you try another memory set?
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
post #2564 of 6656
Quote:
Originally Posted by Blast View Post

Nope. Both of the sticks give the same result. All possible combinations result in error 53. I even checked the pins on the CPU socket (all of which were fine).

No offense but you don't exactly overwhelm us with information. Please fill in your system specs so that you can receive more useful recommendations. I assume your current system specs is of your old rig.

My guess is that either your ram is not compatible (assuming your using a Gigabyte GA-z77x-ud5h board), or you have a bad stick(s). Again, without knowing the model number of the ram its just a shot in the dark.
post #2565 of 6656
Quote:
Originally Posted by Blast View Post

Nope. Both of the sticks give the same result. All possible combinations result in error 53. I even checked the pins on the CPU socket (all of which were fine).

Your G-skill X rip jaws are fine as far as compatibility. Rather or not its the board or the sticks can be discovered by trying them in a another system but if you do not have access to one its tough. And finding known good ram to try in your board is tough too.

If I were close by I would lend you my spare set of Sammy green ram.

My money is on the board being bad but ...................
    
CPUMotherboardGraphicsRAM
Intel 3770K GIGABYTE GA-Z77X-UD5H SAPPHIRE Radeon HD 6850 Kingston HyperX 16GB (4 x 4GB) DDR3 2133 XMP Mo... 
Hard DriveOptical DriveCoolingOS
Dual WD Caviar Black WD1002FAEX 1TB in RAID1 LITEON SATA W\L-SCRIBE DRW-24B1ST/BLK/B/AS XSPC RASA-750-RS240 Water Cooling Kit Win 7 Pro x64 
MonitorKeyboardPowerCase
Dual Samsung 215TW S-PVA LCD's Logitech K350 Wireless CORSAIR Professional Series HX750 Rosewill BlackHawk Mid Tower 
MouseAudioOtherOther
Logitech MX Revolution On Board Realtek ALC898 Rosewill USB 3.0 all in one card reader RDCR-11... Scythe Kaze Master Pro 5.25 Fan Controller 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel 3770K GIGABYTE GA-Z77X-UD5H SAPPHIRE Radeon HD 6850 Kingston HyperX 16GB (4 x 4GB) DDR3 2133 XMP Mo... 
Hard DriveOptical DriveCoolingOS
Dual WD Caviar Black WD1002FAEX 1TB in RAID1 LITEON SATA W\L-SCRIBE DRW-24B1ST/BLK/B/AS XSPC RASA-750-RS240 Water Cooling Kit Win 7 Pro x64 
MonitorKeyboardPowerCase
Dual Samsung 215TW S-PVA LCD's Logitech K350 Wireless CORSAIR Professional Series HX750 Rosewill BlackHawk Mid Tower 
MouseAudioOtherOther
Logitech MX Revolution On Board Realtek ALC898 Rosewill USB 3.0 all in one card reader RDCR-11... Scythe Kaze Master Pro 5.25 Fan Controller 
  hide details  
Reply
post #2566 of 6656
I got the computer somewhat working. I think there was a short or something somewhere o.o?

I removed the board, fired it up away from metal, worked fine-ish.

Back in the case, fires up.

But the board still gives me issues. Most of the time it will hang at b2, AE, or A0 (when it hangs, I receive no video feed). On the rare occasion I receive a video signal, I go into the bios. After I am in the bios for a few minutes the computer will spontaneously lose video and my videocard fan will start throttling. (This is NOT a video card issue.)

In the event that I can't get to bios and the system doesn't hang, it will continuously go through the startup sequence on the debugger. It will get to about 72, briefly 9x (x being something I cannot see due to the shortness of it being there) and then it will start back from 15. Fans throttle during this process.
The Beast 2.3
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 2700k ASRock Extreme6 Z77 nVidia EVGA GTX 670 G.Skill Ripjaws X (16 gb) 
Hard DriveHard DriveOptical DriveCooling
WD Caviar Black 1tb 7200rpm Vertex 4 (128 GB) Raid 0 LG Bluray Burner (WH14NS40) XSPC Rasa 750 RX 360 kit (push/pull + shrouds) 
OSMonitorKeyboardPower
Windows 7 Ultimate (64-bit) LG IPS235V (2x) MK550 Antec Quattro 1200 
CaseMouseAudio
Rosewill RSV-L4000 Logitech G700 HT Omega Claro II 
  hide details  
Reply
The Beast 2.3
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 2700k ASRock Extreme6 Z77 nVidia EVGA GTX 670 G.Skill Ripjaws X (16 gb) 
Hard DriveHard DriveOptical DriveCooling
WD Caviar Black 1tb 7200rpm Vertex 4 (128 GB) Raid 0 LG Bluray Burner (WH14NS40) XSPC Rasa 750 RX 360 kit (push/pull + shrouds) 
OSMonitorKeyboardPower
Windows 7 Ultimate (64-bit) LG IPS235V (2x) MK550 Antec Quattro 1200 
CaseMouseAudio
Rosewill RSV-L4000 Logitech G700 HT Omega Claro II 
  hide details  
Reply
post #2567 of 6656
Quote:
Originally Posted by Blast View Post

I got the computer somewhat working. I think there was a short or something somewhere o.o?
I removed the board, fired it up away from metal, worked fine-ish.
Back in the case, fires up.
On the rare occasion I receive a video signal, I go into the bios. After I am in the bios for a few minutes the computer will spontaneously lose video and my videocard fan will start throttling. (This is NOT a video card issue.)
In the event that I can't get to bios and the system doesn't hang, it will continuously go through the startup sequence on the debugger. It will get to about 72, briefly 9x (x being something I cannot see due to the shortness of it being there) and then it will start back from 15. Fans throttle during this process.

I think I would remove it from the case again and see how the video works outside the case. And go from there. If it repeats I would RMA. If its fine I would ......... try another case? *** 2therock scratches head***
    
CPUMotherboardGraphicsRAM
Intel 3770K GIGABYTE GA-Z77X-UD5H SAPPHIRE Radeon HD 6850 Kingston HyperX 16GB (4 x 4GB) DDR3 2133 XMP Mo... 
Hard DriveOptical DriveCoolingOS
Dual WD Caviar Black WD1002FAEX 1TB in RAID1 LITEON SATA W\L-SCRIBE DRW-24B1ST/BLK/B/AS XSPC RASA-750-RS240 Water Cooling Kit Win 7 Pro x64 
MonitorKeyboardPowerCase
Dual Samsung 215TW S-PVA LCD's Logitech K350 Wireless CORSAIR Professional Series HX750 Rosewill BlackHawk Mid Tower 
MouseAudioOtherOther
Logitech MX Revolution On Board Realtek ALC898 Rosewill USB 3.0 all in one card reader RDCR-11... Scythe Kaze Master Pro 5.25 Fan Controller 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel 3770K GIGABYTE GA-Z77X-UD5H SAPPHIRE Radeon HD 6850 Kingston HyperX 16GB (4 x 4GB) DDR3 2133 XMP Mo... 
Hard DriveOptical DriveCoolingOS
Dual WD Caviar Black WD1002FAEX 1TB in RAID1 LITEON SATA W\L-SCRIBE DRW-24B1ST/BLK/B/AS XSPC RASA-750-RS240 Water Cooling Kit Win 7 Pro x64 
MonitorKeyboardPowerCase
Dual Samsung 215TW S-PVA LCD's Logitech K350 Wireless CORSAIR Professional Series HX750 Rosewill BlackHawk Mid Tower 
MouseAudioOtherOther
Logitech MX Revolution On Board Realtek ALC898 Rosewill USB 3.0 all in one card reader RDCR-11... Scythe Kaze Master Pro 5.25 Fan Controller 
  hide details  
Reply
post #2568 of 6656
The video worked on the first try when out of the case, but I didn't try it multiple times. I am trying to avoid taking it out of the case as much as possible because the liquid cooling system is a pain to work around XD
The Beast 2.3
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 2700k ASRock Extreme6 Z77 nVidia EVGA GTX 670 G.Skill Ripjaws X (16 gb) 
Hard DriveHard DriveOptical DriveCooling
WD Caviar Black 1tb 7200rpm Vertex 4 (128 GB) Raid 0 LG Bluray Burner (WH14NS40) XSPC Rasa 750 RX 360 kit (push/pull + shrouds) 
OSMonitorKeyboardPower
Windows 7 Ultimate (64-bit) LG IPS235V (2x) MK550 Antec Quattro 1200 
CaseMouseAudio
Rosewill RSV-L4000 Logitech G700 HT Omega Claro II 
  hide details  
Reply
The Beast 2.3
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 2700k ASRock Extreme6 Z77 nVidia EVGA GTX 670 G.Skill Ripjaws X (16 gb) 
Hard DriveHard DriveOptical DriveCooling
WD Caviar Black 1tb 7200rpm Vertex 4 (128 GB) Raid 0 LG Bluray Burner (WH14NS40) XSPC Rasa 750 RX 360 kit (push/pull + shrouds) 
OSMonitorKeyboardPower
Windows 7 Ultimate (64-bit) LG IPS235V (2x) MK550 Antec Quattro 1200 
CaseMouseAudio
Rosewill RSV-L4000 Logitech G700 HT Omega Claro II 
  hide details  
Reply
post #2569 of 6656
Quick question about the problems I am having with my UDH5 WIFI board - while I am in windows 7 ultimate 64 bit, nothing is plugged into the USB 3.0 ports, but it constantly keeps bleeping at me and telling me that a device has exceeded voltage or something. Will the latest bios fix this?

Also, I have serious issues with the Wired LAN card dropping connectivity on me intermittently. Not sure if it's the onboard card, or if it's the cable... or if it's just Comcast - still trying to get to the bottom of that.
post #2570 of 6656
what bios are you using? There have been others that have reported similar error message. Do a search and see what they have tried. If your not using the latest official bios you can try that or the latest beta. Also, make sure you have updated all of your drivers as well. Finally, next time it happens write down exactly what the error message is to make troubleshooting easier.

I have not seen anyone complaining about the LAN and connectivity issues. which LAN port are you using (I am assuming you are using the on-board and not an add-on card)?
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › GIGABYTE Z77X Owners/Discussion/Information/Support Thread and Club (UD5H, UD3H, D3H, and ALL)