Overclock.net › Forums › Intel › Intel Motherboards › GIGABYTE Z77X Owners/Discussion/Information/Support Thread and Club (UD5H, UD3H, D3H, and ALL)
New Posts  All Forums:Forum Nav:

GIGABYTE Z77X Owners/Discussion/Information/Support Thread and Club (UD5H, UD3H, D3H, and ALL) - Page 280

post #2791 of 6656
aah! It never ends.


On Sun 7/22/2012 8:02:50 PM GMT your computer crashed
crash dump file: C:\Windows\Minidump\072212-4524-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x7F1C0)
Bugcheck code: 0xF4 (0x3, 0xFFFFFA800EC2DB30, 0xFFFFFA800EC2DE10, 0xFFFFF8000319B510)
Error: CRITICAL_OBJECT_TERMINATION
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that a process or thread crucial to system operation has unexpectedly exited or been terminated.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver which cannot be identified at this time.


On Sun 7/22/2012 8:02:50 PM GMT your computer crashed
crash dump file: C:\Windows\memory.dmp
This was probably caused by the following module: ntkrnlmp.exe (nt!KeBugCheckEx+0x0)
Bugcheck code: 0xF4 (0x3, 0xFFFFFA800EC2DB30, 0xFFFFFA800EC2DE10, 0xFFFFF8000319B510)
Error: CRITICAL_OBJECT_TERMINATION
Bug check description: This indicates that a process or thread crucial to system operation has unexpectedly exited or been terminated.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver which cannot be identified at this time.


I updated to Windows 7 SP1 and now these are all I get. I had gotten them pretty much minutes apart between restarts.

I think I found the culprit though, I removed my 2 USB 3 hard drives and a hub from the USB ports on the back. I am no longer crashing. They were plugged into the Intel ports so I'm going to see if there's a driver update and try plugging them in again.

Oy Veh! I've gone from a PC that stays 24/7 weeks on end (restarting only for Windows Updates) to this. Please tell me everything will iron itself out sooner than later.

UPDATE:

Seems that it may have been my Logitech G19. After plugging everything back in and then putting the KB from the front USB to the VIA on the rear, Windows crashes. Suffice it to say, it doesn't look like this KB is going to work well on any of the VIA ports so I'll leave it in the front port till I put in a usb 2 bracket in the back which I'm assuming uses the Intel ports.
Edited by neoprimal - 7/22/12 at 2:14pm
 
Beast Devolution
(12 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i5 3570K Gigabyte Z77X-UD3H PNY XLR8 GeForce GTX 560  G.Skill Value Series DDR 
Hard DriveHard DriveHard DriveHard Drive
OCZ Agility 4 Seagate Baracuda Seagate GoFlex Desk Seagate GoFlex Desk 
Hard DriveOptical DriveOSMonitor
Seagate Expansion Lite On 24x Windows 8 Pro Sceptre 24" LCD 
MonitorKeyboardPowerCase
AOC 18" LCD Logitech G19 XFX Core 850W Fractal Design R4 Black Pearl 
MouseAudioOtherOther
Logitech Cordless Optical Trackman VIA 2021 Onboard Logitech G930 Headset APC BackUPS 350 
OtherOtherOtherOther
APC BackUPS 350 CyberPower 800AVR Anker 4 port+1 USB 3.0 Hub Belkin Tetrahub 
OtherOtherOtherOther
Kensington Travel USB Hub Logitech 5.1 Speaker Logitech Rumblepad 2 Epson Stylus Photo RX595 AIO Printer 
Other
APC BackUPS ES 650 
CPUMotherboardGraphicsRAM
Intel Dual Core E2200 Abit IP35 Pro XFX 8800GT 512MB G.Skill Value Series 8GB 
Hard DriveHard DriveHard DriveOptical Drive
Seagate 1TB Hitachi 1TB Seagate 750GB Asus CDRW/DVDRW 22x 
KeyboardPowerCaseAudio
IOGEAR Cordless Keyboard Diablotek 400W Raidmax Scorpio Realtek 888 Onboard 
CPUMotherboardGraphicsRAM
Intel Q6600 Xfx Nforce 630i Geforce 7150 Onboard Geforce 7150 OCZ DDR2 
Hard DriveOptical DriveCoolingOS
Hitachi Lite On 24x Thermaltake Slim X3 Windows 7 Home Premium SP1 
MonitorKeyboardCaseMouse
Proscan 42" LCD HDTV Iogear Black 2.4GHz Multimedia Keyboard with La... Athenatec Evo Iogear Black 2.4GHz Multimedia Keyboard with La... 
Audio
NVidia HDMI 
  hide details  
Reply
 
Beast Devolution
(12 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i5 3570K Gigabyte Z77X-UD3H PNY XLR8 GeForce GTX 560  G.Skill Value Series DDR 
Hard DriveHard DriveHard DriveHard Drive
OCZ Agility 4 Seagate Baracuda Seagate GoFlex Desk Seagate GoFlex Desk 
Hard DriveOptical DriveOSMonitor
Seagate Expansion Lite On 24x Windows 8 Pro Sceptre 24" LCD 
MonitorKeyboardPowerCase
AOC 18" LCD Logitech G19 XFX Core 850W Fractal Design R4 Black Pearl 
MouseAudioOtherOther
Logitech Cordless Optical Trackman VIA 2021 Onboard Logitech G930 Headset APC BackUPS 350 
OtherOtherOtherOther
APC BackUPS 350 CyberPower 800AVR Anker 4 port+1 USB 3.0 Hub Belkin Tetrahub 
OtherOtherOtherOther
Kensington Travel USB Hub Logitech 5.1 Speaker Logitech Rumblepad 2 Epson Stylus Photo RX595 AIO Printer 
Other
APC BackUPS ES 650 
CPUMotherboardGraphicsRAM
Intel Dual Core E2200 Abit IP35 Pro XFX 8800GT 512MB G.Skill Value Series 8GB 
Hard DriveHard DriveHard DriveOptical Drive
Seagate 1TB Hitachi 1TB Seagate 750GB Asus CDRW/DVDRW 22x 
KeyboardPowerCaseAudio
IOGEAR Cordless Keyboard Diablotek 400W Raidmax Scorpio Realtek 888 Onboard 
CPUMotherboardGraphicsRAM
Intel Q6600 Xfx Nforce 630i Geforce 7150 Onboard Geforce 7150 OCZ DDR2 
Hard DriveOptical DriveCoolingOS
Hitachi Lite On 24x Thermaltake Slim X3 Windows 7 Home Premium SP1 
MonitorKeyboardCaseMouse
Proscan 42" LCD HDTV Iogear Black 2.4GHz Multimedia Keyboard with La... Athenatec Evo Iogear Black 2.4GHz Multimedia Keyboard with La... 
Audio
NVidia HDMI 
  hide details  
Reply
post #2792 of 6656
Thread Starter 
BTw Z77X-UP5-TH and Ultar durable 5 technical review: http://youtu.be/FYP74eXCVPM

Up5 photoshoot is done, but i need to edit and post.
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
post #2793 of 6656
This may have already been posted, and made by Sin NO LESS.

But the club needs an update. Not only the Ultra Durable 4 class boards for z77.

No, now the arrival of the Ultra Durable 5 Ultra Power boards. New club revision Sin, Up4/5/7.

Bump if this has already been posted!

Btw, just watched all 29:19 minutes of it.

yup. Buying it this week once it releases.
     
CPUMotherboardGraphicsRAM
i7 6800k Evga Micro2 Evga GTX 1080 FTW Hybrid Corsair Dominator 32GB 3200mhz (one of the stup... 
Hard DriveHard DriveOptical DriveCooling
Intel 750 800gb Samsung 950 Pro 256gb with AngelWing PX1 PCIE h... Lol Corsair H80i v2 
OSOSMonitorMonitor
Windows 10 Home 64bit CentOS 7 (in VM) Dell u2311h Dell u2311h 
KeyboardPowerCaseMouse
Leopold FC660C Silverstone 700 sfx-l Platinum thing Silverstone FT03B Logitech MX Master 
AudioAudioAudioOther
Oppo HA2 Sony XBA Z5 Blue Yeti Microphone Asus USB-AC68 
CPUMotherboardGraphicsRAM
i7 860 asus p7p55d-e pro EVGA gtx 460 Gskill ripjaws CL9 4gb 
Hard DriveCoolingOSMonitor
Western Digital Caviar Black Zalman CNPS10x Performa Windows 7 Ultimate OEM Samsung 223BW 
KeyboardPowerCaseMouse
Microsoft ergonomics 7000 Corsair 750tx AZZA Solano 1000 Some thing 
Mouse PadAudio
some generic thing Creative Sound Blaster Arena 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
i7 6800k Evga Micro2 Evga GTX 1080 FTW Hybrid Corsair Dominator 32GB 3200mhz (one of the stup... 
Hard DriveHard DriveOptical DriveCooling
Intel 750 800gb Samsung 950 Pro 256gb with AngelWing PX1 PCIE h... Lol Corsair H80i v2 
OSOSMonitorMonitor
Windows 10 Home 64bit CentOS 7 (in VM) Dell u2311h Dell u2311h 
KeyboardPowerCaseMouse
Leopold FC660C Silverstone 700 sfx-l Platinum thing Silverstone FT03B Logitech MX Master 
AudioAudioAudioOther
Oppo HA2 Sony XBA Z5 Blue Yeti Microphone Asus USB-AC68 
CPUMotherboardGraphicsRAM
i7 860 asus p7p55d-e pro EVGA gtx 460 Gskill ripjaws CL9 4gb 
Hard DriveCoolingOSMonitor
Western Digital Caviar Black Zalman CNPS10x Performa Windows 7 Ultimate OEM Samsung 223BW 
KeyboardPowerCaseMouse
Microsoft ergonomics 7000 Corsair 750tx AZZA Solano 1000 Some thing 
Mouse PadAudio
some generic thing Creative Sound Blaster Arena 
  hide details  
Reply
post #2794 of 6656
Quote:
Originally Posted by neoprimal View Post

aah! It never ends.
On Sun 7/22/2012 8:02:50 PM GMT your computer crashed
crash dump file: C:\Windows\Minidump\072212-4524-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x7F1C0)
Bugcheck code: 0xF4 (0x3, 0xFFFFFA800EC2DB30, 0xFFFFFA800EC2DE10, 0xFFFFF8000319B510)
Error: CRITICAL_OBJECT_TERMINATION
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that a process or thread crucial to system operation has unexpectedly exited or been terminated.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver which cannot be identified at this time.
On Sun 7/22/2012 8:02:50 PM GMT your computer crashed
crash dump file: C:\Windows\memory.dmp
This was probably caused by the following module: ntkrnlmp.exe (nt!KeBugCheckEx+0x0)
Bugcheck code: 0xF4 (0x3, 0xFFFFFA800EC2DB30, 0xFFFFFA800EC2DE10, 0xFFFFF8000319B510)
Error: CRITICAL_OBJECT_TERMINATION
Bug check description: This indicates that a process or thread crucial to system operation has unexpectedly exited or been terminated.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver which cannot be identified at this time.
I updated to Windows 7 SP1 and now these are all I get. I had gotten them pretty much minutes apart between restarts.
I think I found the culprit though, I removed my 2 USB 3 hard drives and a hub from the USB ports on the back. I am no longer crashing. They were plugged into the Intel ports so I'm going to see if there's a driver update and try plugging them in again.
Oy Veh! I've gone from a PC that stays 24/7 weeks on end (restarting only for Windows Updates) to this. Please tell me everything will iron itself out sooner than later.
UPDATE:
Seems that it may have been my Logitech G19. After plugging everything back in and then putting the KB from the front USB to the VIA on the rear, Windows crashes. Suffice it to say, it doesn't look like this KB is going to work well on any of the VIA ports so I'll leave it in the front port till I put in a usb 2 bracket in the back which I'm assuming uses the Intel ports.

Sorry to hear about your misfortune, would you recommend the board after your problems? I mean Sin seems to recommend the z77 gigabyte boards everywhere and yet it looks like they have a lot of problems sad-smiley-002.gif
AMD
(9 items)
 
Home PC
(9 items)
 
Current
(9 items)
 
CPUMotherboardGraphicsRAM
AMD 8320 Asus M5A99X EVO Rev 2.0 Sapphire 7970 Kingston HyperX Beast 2x4Gb 9CL 1600Mhz 
Hard DriveCoolingOSPower
Samsung 830 128 Gb ThermalRight Macho r2-h0 Windows 8.1 Corair 650W TX 
Case
Zalman Z11 Plus 
CPUMotherboardGraphicsRAM
3770k Gigabyte Z77x UD3H Intel HD 4000 Geil Black Dragon 2 x 4 GB 1600 Mhz 
Hard DriveCoolingOSPower
Samsung 830  Thermalright True Spirit 120 Windows 7 SP1 x64 Corsair 650TX v2 
Case
Corsair Carbide 400R 
CPUMotherboardGraphicsRAM
4790k Asus VII Ranger Gigabyte 290 8 Gb Corsair DDR3 
Hard DriveCoolingKeyboardPower
3 x Samsung 850 250gb SSD Swiftech H220 BlackWidow Ultimate EVGA 850 G2 
Case
Phanteks Enthoo Evolv ATX 
  hide details  
Reply
AMD
(9 items)
 
Home PC
(9 items)
 
Current
(9 items)
 
CPUMotherboardGraphicsRAM
AMD 8320 Asus M5A99X EVO Rev 2.0 Sapphire 7970 Kingston HyperX Beast 2x4Gb 9CL 1600Mhz 
Hard DriveCoolingOSPower
Samsung 830 128 Gb ThermalRight Macho r2-h0 Windows 8.1 Corair 650W TX 
Case
Zalman Z11 Plus 
CPUMotherboardGraphicsRAM
3770k Gigabyte Z77x UD3H Intel HD 4000 Geil Black Dragon 2 x 4 GB 1600 Mhz 
Hard DriveCoolingOSPower
Samsung 830  Thermalright True Spirit 120 Windows 7 SP1 x64 Corsair 650TX v2 
Case
Corsair Carbide 400R 
CPUMotherboardGraphicsRAM
4790k Asus VII Ranger Gigabyte 290 8 Gb Corsair DDR3 
Hard DriveCoolingKeyboardPower
3 x Samsung 850 250gb SSD Swiftech H220 BlackWidow Ultimate EVGA 850 G2 
Case
Phanteks Enthoo Evolv ATX 
  hide details  
Reply
post #2795 of 6656
Quote:
Originally Posted by Cruxer View Post

Yeah, that's what I tried to do, no avail
I am using Sys_fan 1, 2 and 3. As the fans are 3 pin I cant use PWM and set it to voltage in bios.
Is there any other way than the slope to set fan speed?
Is there anyway to assign a dedicated IRQ in the bios?
I wasn't using PWM fans either. Why not just try all the options in the BIOS for fan control? The only PWM I was running was the fans on a NH-D14, all the rest were 3 pin. I'm pretty sure I was still using the PWM function, but I know I found some way to control the fans on the 1,2,3 headers from within BIOS. Not OPTIMALLY controlled, but some measure of control.
The thing is you try all the options available, and if it's not working like you want get a fan controller. wink.gif I'll be the first to say Gigabyte's fan controlling is not the best, is why I use controllers. I use a Scythe Kaze Master Pro on one rig, and in the process of wiring both a G Vanns FC9 & Lamptron FC8 on the other for the water cooling pump and fans. The Kaze Master Pro also has readouts for rpm so you don't need to plug into the board headers at all.
post #2796 of 6656
hi! I'm new to this forum, and I have a question / problem that I really lose sleep, I start, I had saved money, and I decided to buy a computer, start with a good base and gradually add things, so I decided to buy Z77-ga d3h GB, the processor is a little short but to start walking as I settled is a G860, I get everything, and start to install, without any problems, install, boot and put my win7 32bit, and using the computer for a few days, I'm freezing the screen three times, having to reboot to be solved, after that install the win7 64bit sp1, but gives no failure looking at the ET6 see that the temperature is high http://imageshack.us/photo/my-images...ttulo1rim.png/ PCH and I'm starting to get nervous, I am contacting pccom service. and I recommend that you install HWMonitor http://imageshack.us/photo/my-images...nttulobco.png/ and always gives me a temperature of 18 ° C below, also check it in the bios (F6) http://imageshack .us/photo/my-images/528/dsc01921z.jpg / ET6 goes like, update the bios (f9) and dont move the temperatures. basically this is my problem, not to do, the plate is impeccable I arrived on June 20 and barely two days of use, I feel the billet, thank you very much for reading and I hope that is solution!
pd: no OC, sorry for my level of english
post #2797 of 6656
I was about to buy the UDH5 for a build I am planning this weekend, then they come out with UP5 with thunderbolt ports.
http://www.newegg.com/Product/Product.aspx?Item=N82E16813128559


1) will I ever use thunderbolt?
2) Will I be able to buy an expansion card to place on the UD5H with thunderbolt ports or does it need a chip on the mainboard?
3) is this basically a newer UD5H upgraded with some fixes and added thunderbolt or an all new more buggy board.
Edited by Lazlonius - 7/23/12 at 6:01am
LAZ
(16 items)
 
Stella Blue
(13 items)
 
 
CPUMotherboardGraphicsRAM
i3570K GA-Z77X-UP5 TH SAPPHIRE Radeon HD 7870 GHz Edition OC  Gskill F3-12800CL8D-8GBXM 
Hard DriveHard DriveCoolingOS
Intel 330 240GB SSD  WD Caviar Black 2TB X 3 Cooler Master Hyper 212+ Windows 7 64 
MonitorPowerCaseMouse
Acer 23" X3 Corsair TX 650 Cooler Master Storm Scout Corsair M90 
Mouse PadAudio
Razer Goliathus Fragged Speed Klipsch Pro media 5.1 & Senn 598s 
CPUMotherboardGraphicsRAM
Phenom II 940 X4 BE Asus M477D XFX 6950 Gskill 1066 ddr2 
Hard DriveHard DriveOptical DriveCooling
Corsair M4 SSD 64GB Western Digital Caviar Black 1GB Lite on BD-r Rosewill RCX-Z5-ultra 
OSMonitorPowerCase
Windows 8 Achieva Shimian QH270-Lite Corsair 430 Cooler Master ATC 
Mouse
Logitech g400 
  hide details  
Reply
LAZ
(16 items)
 
Stella Blue
(13 items)
 
 
CPUMotherboardGraphicsRAM
i3570K GA-Z77X-UP5 TH SAPPHIRE Radeon HD 7870 GHz Edition OC  Gskill F3-12800CL8D-8GBXM 
Hard DriveHard DriveCoolingOS
Intel 330 240GB SSD  WD Caviar Black 2TB X 3 Cooler Master Hyper 212+ Windows 7 64 
MonitorPowerCaseMouse
Acer 23" X3 Corsair TX 650 Cooler Master Storm Scout Corsair M90 
Mouse PadAudio
Razer Goliathus Fragged Speed Klipsch Pro media 5.1 & Senn 598s 
CPUMotherboardGraphicsRAM
Phenom II 940 X4 BE Asus M477D XFX 6950 Gskill 1066 ddr2 
Hard DriveHard DriveOptical DriveCooling
Corsair M4 SSD 64GB Western Digital Caviar Black 1GB Lite on BD-r Rosewill RCX-Z5-ultra 
OSMonitorPowerCase
Windows 8 Achieva Shimian QH270-Lite Corsair 430 Cooler Master ATC 
Mouse
Logitech g400 
  hide details  
Reply
post #2798 of 6656
Hi all! I'm obviously new here and need the assistance of you Z77 pros. I've already searched this thread for my issues and haven't found any answers - maybe I'm not using the right search terms. In any event here are my components and my problems:

UD5H with F8, i5 3570k CPU (Stock), Samsung 830 SSD 256GB C: Drive, Sapphire HD5770 graphics, Corsair VX550W PSU and Windows 7 64bit (Clean Installation)

My 2 issues are that an "A0" Error-IDE Initialization is started" shows on the board after getting to Windows 7 and second; when in the bios, I am unable to use Q-Flash; the only button that responds is Exit. "Update Bios From Drive" will not respond. Actually, it did once when I went to F6 but after that it stopped working. So, now I have to use @BIOS.

In summary:

1) What have I done to kill my Q-Flash and can I fix it? (have I permanently corrupted my bios?)

2) What may be causing the "A0" error on the LEDs on my board? I tried unplugging everything but the mouse, keyboard and graphics card and I still get it.

Many thanks in advance to any who can help me!
David
post #2799 of 6656
Quote:
Originally Posted by Davo55 View Post

2) What may be causing the "A0" error on the LEDs on my board? I tried unplugging everything but the mouse, keyboard and graphics card and I still get it.


A0 means all is good man.
Green-Ivy
(15 items)
 
  
CPUMotherboardGraphicsRAM
3770K Gigabyte Z77X-UD5H Z77 780ti Samsung Green 16GB (4x4GB) DDR3 PC3-12800C11 16... 
Hard DriveHard DriveHard DriveCooling
Crucial M4 - 128GB WD Caviar Black 1TB Samsung Evo 840 -500gb Antec Kúhler H2O 920 
OSMonitorKeyboardPower
Win7 x64 Acer G24 Logitech G15 XFX 850W XXX Edition Modular '80 Plus Silver' 
CaseMouseAudio
Silverstone Fortress FT-02-W Logitech G5 Creative X-Fi Fatal1ty PCI 
  hide details  
Reply
Green-Ivy
(15 items)
 
  
CPUMotherboardGraphicsRAM
3770K Gigabyte Z77X-UD5H Z77 780ti Samsung Green 16GB (4x4GB) DDR3 PC3-12800C11 16... 
Hard DriveHard DriveHard DriveCooling
Crucial M4 - 128GB WD Caviar Black 1TB Samsung Evo 840 -500gb Antec Kúhler H2O 920 
OSMonitorKeyboardPower
Win7 x64 Acer G24 Logitech G15 XFX 850W XXX Edition Modular '80 Plus Silver' 
CaseMouseAudio
Silverstone Fortress FT-02-W Logitech G5 Creative X-Fi Fatal1ty PCI 
  hide details  
Reply
post #2800 of 6656
Thread Starter 
your drive in QFLASH has tobe formatted in FAT32, if it isn't then it wont go into the drive.

Also yes A0 is okay.

Yea I will make a new club sometime today.
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › GIGABYTE Z77X Owners/Discussion/Information/Support Thread and Club (UD5H, UD3H, D3H, and ALL)