Overclock.net › Forums › Intel › Intel Motherboards › GIGABYTE Z77X Owners/Discussion/Information/Support Thread and Club (UD5H, UD3H, D3H, and ALL)
New Posts  All Forums:Forum Nav:

GIGABYTE Z77X Owners/Discussion/Information/Support Thread and Club (UD5H, UD3H, D3H, and ALL) - Page 320

post #3191 of 6656
I ran into the same thing with F9q, could only set Normal for memory timings and voltage. If I try to use XMP Profile 1 or 2, it looks like it accepts it, but the voltage is still "stuck" on 1.5V, and I can't manually change it. My GSkill memory likes 1.65V, and won't even finish POST at 2133MHz at 1.5V. I have to use Normal 1600 MHz and 1.5V to run F9q. I used F8d on XMP Profile 2 and it ran 100% stable at 2133 MHz with 1.65V, but I can't get there with F9q. I think I'll give F10 a try, since F9q didn't fix my USB flakiness problem, and if it turns out that F10's no better, I'll switch back to F8d and wait for something new and better to come along.
    
CPUMotherboardGraphicsGraphics
Intel Core i7-3770K Gigabyte GA-Z77X-UD5H Gigabyte 580GTX Asus 440GT for PhysX 
RAMHard DriveHard DriveHard Drive
16 GB G.Skill PC3-17000 2133MHz @1.65V Samsung Model 830 - 256GB SSD Samsung Model 470- 128GB SSD 2x Samsung 1 TB F3's in RAID 0 
Optical DriveCoolingOSMonitor
LG Bluray Combo Zalman Performa 10X Windows 7 64-bit Asus VG278HE 
KeyboardPowerCaseMouse
SS (Ideazon) Merc Stealth Corsair AX850 Corsair Carbide 500R CM Spawn 
Mouse PadAudioOther
Mionix Sargas 460 Creative Soundblaster X-Fi Titanium Fatal1ty Pro Hauppauge WinTV-HVR-1250 TV Tuner Card 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
Intel Core i7-3770K Gigabyte GA-Z77X-UD5H Gigabyte 580GTX Asus 440GT for PhysX 
RAMHard DriveHard DriveHard Drive
16 GB G.Skill PC3-17000 2133MHz @1.65V Samsung Model 830 - 256GB SSD Samsung Model 470- 128GB SSD 2x Samsung 1 TB F3's in RAID 0 
Optical DriveCoolingOSMonitor
LG Bluray Combo Zalman Performa 10X Windows 7 64-bit Asus VG278HE 
KeyboardPowerCaseMouse
SS (Ideazon) Merc Stealth Corsair AX850 Corsair Carbide 500R CM Spawn 
Mouse PadAudioOther
Mionix Sargas 460 Creative Soundblaster X-Fi Titanium Fatal1ty Pro Hauppauge WinTV-HVR-1250 TV Tuner Card 
  hide details  
Reply
post #3192 of 6656
I had to load F9d onto both the Main and Backup bioses, then set memory voltage manually on both the main bios and backup bios before it would work.

Main and Backup settings seemed to be conflicting somehow...?

Will be trying F10 later.
Main Machine
(18 items)
 
  
CPUMotherboardGraphicsRAM
Intel i5-3570K Gigabyte Z77X-UD5H (F16g) EVGA GTX 660 Superclocked Samsung Green MV-3V4G3D/US 2133Mhz 9-10-10-19-1... 
Hard DriveCoolingCoolingCooling
Corsair Force GS 240GB Zalman 9700 Cooler 2x 120mm Front intake fans (mounted In 5.25" bays) 1x 120mm Side intake fan 
CoolingOSMonitorKeyboard
1x 120mm Rear exhaust fan Windows 8.1 Enterprise (x64) Sony KDL-55W905A Logitech K120 
PowerCaseMouseAudio
Tagan U480-U22 Lian Li PC-V1200 Plus Logitech B110 Wasapi Bitstreaming 
AudioAudio
Arcam AVP700 preamp processor 5x KRK RP8 (G1) 
  hide details  
Reply
Main Machine
(18 items)
 
  
CPUMotherboardGraphicsRAM
Intel i5-3570K Gigabyte Z77X-UD5H (F16g) EVGA GTX 660 Superclocked Samsung Green MV-3V4G3D/US 2133Mhz 9-10-10-19-1... 
Hard DriveCoolingCoolingCooling
Corsair Force GS 240GB Zalman 9700 Cooler 2x 120mm Front intake fans (mounted In 5.25" bays) 1x 120mm Side intake fan 
CoolingOSMonitorKeyboard
1x 120mm Rear exhaust fan Windows 8.1 Enterprise (x64) Sony KDL-55W905A Logitech K120 
PowerCaseMouseAudio
Tagan U480-U22 Lian Li PC-V1200 Plus Logitech B110 Wasapi Bitstreaming 
AudioAudio
Arcam AVP700 preamp processor 5x KRK RP8 (G1) 
  hide details  
Reply
post #3193 of 6656
ElectricDelta,clear CMOS .
Gigabyte
(17 items)
 
  
CPUCPUMotherboardGraphics
Core i7-4790K @ 4.9 GHz Core i7-4770K @ 4.7 GHz GA-Z170X-SOCF /GA-Z97X-SOCF/ GA-Z87X-UD3H  Evga GTS 450 SC 
RAMHard DriveOptical DriveCooling
G.Skill F3-2933C12D-8GTXDG @ 3100 (12-15-14-35-... 2xSSD Corsair Force GS 128 (RAID 0), WD Caviar ... LG 62N SATA XSPC RayStorm D5 EX240 (Liquid Ultra)  
OSMonitorPowerCase
Win 7 SP1,Win 8.1,Win 10 (x64) LG 1960TR Gigabyte Superb 720W NZXT Phantom 630 Ultra Tower  
  hide details  
Reply
Gigabyte
(17 items)
 
  
CPUCPUMotherboardGraphics
Core i7-4790K @ 4.9 GHz Core i7-4770K @ 4.7 GHz GA-Z170X-SOCF /GA-Z97X-SOCF/ GA-Z87X-UD3H  Evga GTS 450 SC 
RAMHard DriveOptical DriveCooling
G.Skill F3-2933C12D-8GTXDG @ 3100 (12-15-14-35-... 2xSSD Corsair Force GS 128 (RAID 0), WD Caviar ... LG 62N SATA XSPC RayStorm D5 EX240 (Liquid Ultra)  
OSMonitorPowerCase
Win 7 SP1,Win 8.1,Win 10 (x64) LG 1960TR Gigabyte Superb 720W NZXT Phantom 630 Ultra Tower  
  hide details  
Reply
post #3194 of 6656
Clearing works for me. If I don't clear after any flash then my "other" efi is the only way to set vDRAM.

F10 is working brilliantly with my UD5H & Samsung 30nm DDR3. I'm actually stable using 4x4GB at 2000 9-9-9-27-1T @ 1.45v. I had to bump tRFC to 142. Granted, I have no idea what tRFC does, but I read somewhere to bump it up and work down... biggrin.gif
post #3195 of 6656
This is TerRiFiC Brainysmurf me trying now 4 x 4 2133 10 10 10 28 1T 1.465v booted fine. Hope no Bluescreens...

Hope she holds pls pls
post #3196 of 6656
Brainsmurf pls share what is your imc + vtt voltage settings? I got Bccode 1A
post #3197 of 6656
Nevermind on F10. With it loaded my PC won't sleep... It tries, monitor turns off, but fans keep spinning and lights stay on, and I can't wake it from this zombie like half sleep. I did a hard (jumpered) clear_cmos to go to stock, no change so it wasn't my OC causing it.

Irfy,
I didn't touch imc or vtt. They're running at .925 & 1.05.
The only voltages I had changed with my OC were dram, CPU PLL - 1.65, and a -.060 vcore offset for my 3770k @ 4.2g.

Edit: wanted to add that the zombie sleep issue is happening in Win 7, Linux Mint, and Mountain Lion.
Edited by akabrainysmurf - 8/10/12 at 6:24pm
post #3198 of 6656
Flashed my UD5H to F10, XMP Profile 2 seems to be working fine now. I had previously tried clearing the CMOS on F9q, using "Load optimized Defaults" after flashing, thinking I would keep my F8d settings all intact on the other BIOS, so I could just switch back, if it didn't pan out; did I need to actually pull the battery, put the jumper on, etc. to get F9q working with the XMP profiles? That would mean the "optimized defaults" aren't thorough enough, if so, I suppose. F10 seems good so far for me, off to play some BF3 now...
    
CPUMotherboardGraphicsGraphics
Intel Core i7-3770K Gigabyte GA-Z77X-UD5H Gigabyte 580GTX Asus 440GT for PhysX 
RAMHard DriveHard DriveHard Drive
16 GB G.Skill PC3-17000 2133MHz @1.65V Samsung Model 830 - 256GB SSD Samsung Model 470- 128GB SSD 2x Samsung 1 TB F3's in RAID 0 
Optical DriveCoolingOSMonitor
LG Bluray Combo Zalman Performa 10X Windows 7 64-bit Asus VG278HE 
KeyboardPowerCaseMouse
SS (Ideazon) Merc Stealth Corsair AX850 Corsair Carbide 500R CM Spawn 
Mouse PadAudioOther
Mionix Sargas 460 Creative Soundblaster X-Fi Titanium Fatal1ty Pro Hauppauge WinTV-HVR-1250 TV Tuner Card 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
Intel Core i7-3770K Gigabyte GA-Z77X-UD5H Gigabyte 580GTX Asus 440GT for PhysX 
RAMHard DriveHard DriveHard Drive
16 GB G.Skill PC3-17000 2133MHz @1.65V Samsung Model 830 - 256GB SSD Samsung Model 470- 128GB SSD 2x Samsung 1 TB F3's in RAID 0 
Optical DriveCoolingOSMonitor
LG Bluray Combo Zalman Performa 10X Windows 7 64-bit Asus VG278HE 
KeyboardPowerCaseMouse
SS (Ideazon) Merc Stealth Corsair AX850 Corsair Carbide 500R CM Spawn 
Mouse PadAudioOther
Mionix Sargas 460 Creative Soundblaster X-Fi Titanium Fatal1ty Pro Hauppauge WinTV-HVR-1250 TV Tuner Card 
  hide details  
Reply
post #3199 of 6656
F9q fixed my cold boot issue with my powered RAID1 eSATA box connected. It fixed my wireless keyboard not getting into BIOS, I put my spare wired keyboard away, YaY!
F9q did mess with the XMP thing a little. F10 fixed that. Fat and Happy on F10.
    
CPUMotherboardGraphicsRAM
Intel 3770K GIGABYTE GA-Z77X-UD5H SAPPHIRE Radeon HD 6850 Kingston HyperX 16GB (4 x 4GB) DDR3 2133 XMP Mo... 
Hard DriveOptical DriveCoolingOS
Dual WD Caviar Black WD1002FAEX 1TB in RAID1 LITEON SATA W\L-SCRIBE DRW-24B1ST/BLK/B/AS XSPC RASA-750-RS240 Water Cooling Kit Win 7 Pro x64 
MonitorKeyboardPowerCase
Dual Samsung 215TW S-PVA LCD's Logitech K350 Wireless CORSAIR Professional Series HX750 Rosewill BlackHawk Mid Tower 
MouseAudioOtherOther
Logitech MX Revolution On Board Realtek ALC898 Rosewill USB 3.0 all in one card reader RDCR-11... Scythe Kaze Master Pro 5.25 Fan Controller 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel 3770K GIGABYTE GA-Z77X-UD5H SAPPHIRE Radeon HD 6850 Kingston HyperX 16GB (4 x 4GB) DDR3 2133 XMP Mo... 
Hard DriveOptical DriveCoolingOS
Dual WD Caviar Black WD1002FAEX 1TB in RAID1 LITEON SATA W\L-SCRIBE DRW-24B1ST/BLK/B/AS XSPC RASA-750-RS240 Water Cooling Kit Win 7 Pro x64 
MonitorKeyboardPowerCase
Dual Samsung 215TW S-PVA LCD's Logitech K350 Wireless CORSAIR Professional Series HX750 Rosewill BlackHawk Mid Tower 
MouseAudioOtherOther
Logitech MX Revolution On Board Realtek ALC898 Rosewill USB 3.0 all in one card reader RDCR-11... Scythe Kaze Master Pro 5.25 Fan Controller 
  hide details  
Reply
post #3200 of 6656
Quote:
Originally Posted by 2therock View Post

F9q fixed my cold boot issue with my powered RAID1 eSATA box connected. It fixed my wireless keyboard not getting into BIOS, I put my spare wired keyboard away, YaY!
F9q did mess with the XMP thing a little. F10 fixed that. Fat and Happy on F10.

Hows OC performance on F10? I'm still on F6, hesitant to upgrade due to lack of issuse. However, if any allow a bit higher overclock, or with slightly less voltage, i'll jump up tongue.gif...

Currently 4.7GHz @ 1.33v on my 3770k with F6 BIOS on UD5H
Beast of Burden
(19 items)
 
Cool story, bro!
(16 items)
 
 
CPUMotherboardGraphicsRAM
i7 3770k Gigabyte Z77X-UD5H Gigabyte HD 7970 Reference Ripjaws Z 
Hard DriveHard DriveOptical DriveCooling
Crucial M4 Caviar Black ASUS DVD XSPC Raystorm 
CoolingCoolingCoolingOS
EK FC-7970 w/ Backplate Copper/Acetal RX360 w/ 3x Yate Loon High Speed in Push XSPC Dual Bay Res w/ D5 Pump Windows 7 
MonitorMonitorKeyboardPower
ASUS VE226H ASUS VE226H Cooler Master Quickfire Rapid Corsair HX850 
CaseMouseMouse Pad
HAF 932 Advanced Razer Deathadder QcK Mini 
CPUMotherboardGraphicsRAM
Q9550@ 3.5GHz w/ 1.191v Gigabyte GA-EP45-UD3P Sapphire Reference 5850 @ 775/1100 G.SKILL 4GB (2 x 2GB) DDR2 1066 
Hard DriveHard DriveHard DriveOptical Drive
Crucial C300 Spinpoint F3 Caviar Black ASUS DVD-RW 
CoolingOSMonitorKeyboard
Arctic Cooling Freezer 7 Pro Windows 7 Home Premium 64-bit Samsung 23" Saitek Eclipse III 
PowerCaseMouse
Corsair 430W NZXT Source 210 Wolf King 
  hide details  
Reply
Beast of Burden
(19 items)
 
Cool story, bro!
(16 items)
 
 
CPUMotherboardGraphicsRAM
i7 3770k Gigabyte Z77X-UD5H Gigabyte HD 7970 Reference Ripjaws Z 
Hard DriveHard DriveOptical DriveCooling
Crucial M4 Caviar Black ASUS DVD XSPC Raystorm 
CoolingCoolingCoolingOS
EK FC-7970 w/ Backplate Copper/Acetal RX360 w/ 3x Yate Loon High Speed in Push XSPC Dual Bay Res w/ D5 Pump Windows 7 
MonitorMonitorKeyboardPower
ASUS VE226H ASUS VE226H Cooler Master Quickfire Rapid Corsair HX850 
CaseMouseMouse Pad
HAF 932 Advanced Razer Deathadder QcK Mini 
CPUMotherboardGraphicsRAM
Q9550@ 3.5GHz w/ 1.191v Gigabyte GA-EP45-UD3P Sapphire Reference 5850 @ 775/1100 G.SKILL 4GB (2 x 2GB) DDR2 1066 
Hard DriveHard DriveHard DriveOptical Drive
Crucial C300 Spinpoint F3 Caviar Black ASUS DVD-RW 
CoolingOSMonitorKeyboard
Arctic Cooling Freezer 7 Pro Windows 7 Home Premium 64-bit Samsung 23" Saitek Eclipse III 
PowerCaseMouse
Corsair 430W NZXT Source 210 Wolf King 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › GIGABYTE Z77X Owners/Discussion/Information/Support Thread and Club (UD5H, UD3H, D3H, and ALL)