Overclock.net › Forums › Intel › Intel Motherboards › GIGABYTE Z77X Owners/Discussion/Information/Support Thread and Club (UD5H, UD3H, D3H, and ALL)
New Posts  All Forums:Forum Nav:

GIGABYTE Z77X Owners/Discussion/Information/Support Thread and Club (UD5H, UD3H, D3H, and ALL) - Page 338

post #3371 of 6656
Quote:
Originally Posted by starships View Post

The Marvell controller is what I meant to ask about, sorry about the confusion. Does that mean the 3 other fan headers can do automatic control through PWM/voltage? I plan to buy a real fan controller later on but I wanted to experiment with the boards automatic control in between that time.
Thanks, good to know. Always like learning new cmd commands thumb.gif

I am very happy with my Scythe Kaze Master Pro 5.25 Fan Controller. 6 controllers and temp probes. I have nothing in my board fan ports.
    
CPUMotherboardGraphicsRAM
Intel 3770K GIGABYTE GA-Z77X-UD5H SAPPHIRE Radeon HD 6850 Kingston HyperX 16GB (4 x 4GB) DDR3 2133 XMP Mo... 
Hard DriveOptical DriveCoolingOS
Dual WD Caviar Black WD1002FAEX 1TB in RAID1 LITEON SATA W\L-SCRIBE DRW-24B1ST/BLK/B/AS XSPC RASA-750-RS240 Water Cooling Kit Win 7 Pro x64 
MonitorKeyboardPowerCase
Dual Samsung 215TW S-PVA LCD's Logitech K350 Wireless CORSAIR Professional Series HX750 Rosewill BlackHawk Mid Tower 
MouseAudioOtherOther
Logitech MX Revolution On Board Realtek ALC898 Rosewill USB 3.0 all in one card reader RDCR-11... Scythe Kaze Master Pro 5.25 Fan Controller 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel 3770K GIGABYTE GA-Z77X-UD5H SAPPHIRE Radeon HD 6850 Kingston HyperX 16GB (4 x 4GB) DDR3 2133 XMP Mo... 
Hard DriveOptical DriveCoolingOS
Dual WD Caviar Black WD1002FAEX 1TB in RAID1 LITEON SATA W\L-SCRIBE DRW-24B1ST/BLK/B/AS XSPC RASA-750-RS240 Water Cooling Kit Win 7 Pro x64 
MonitorKeyboardPowerCase
Dual Samsung 215TW S-PVA LCD's Logitech K350 Wireless CORSAIR Professional Series HX750 Rosewill BlackHawk Mid Tower 
MouseAudioOtherOther
Logitech MX Revolution On Board Realtek ALC898 Rosewill USB 3.0 all in one card reader RDCR-11... Scythe Kaze Master Pro 5.25 Fan Controller 
  hide details  
Reply
post #3372 of 6656
Quote:
Originally Posted by DeXel View Post

I don't recommend even using Marvell ports unless you already filled the remaining Intel 6Gbps and 3Gbps ports.
Fan control on these boards is pretty much bad. You can control fans on CPU and Sys_FAN 1 headers through voltage and PWM. Sys_FAN 2 and 3 support PWM only according to manual.
I never tested SYS_FAN 2 and 3 personally since everytime I decide to get my Intel heatsink out (the only PWM fan that I have is on it), I end up not doing it, so I can't confirm if PWM control even works on these headers.
SYS_FAN 4 as you already know is always 100%.
Hope this helps thumb.gif
Thanks, pretty much the details I was looking for. I guess I'll just use the fan controller on the 500r (which will be the case that I'm getting) with the stock fans and when I can afford to replace the stock fans I'll buy a proper controller alongside the replacement fans.

Hoping I don't run into the bugs from above. Snorkle.gif
Main PC
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7-2600k  GIGABYTE Z68 UD4 Gigabyte HD 7950 Windforce 3x Corsair Vengeance 8gb 1600mhz 
Hard DriveCoolingOSMonitor
Seagate 1tb 7200.12 Zalman CNPS20LQ Windows 7 Ultimate 64bit Asus VW246H 
KeyboardPowerCaseMouse
Ducky Shine 2 Cherry MX Red/White LED OCZ ZT Series 550w Corsair 500r Deathadder 3g 
Audio
Superlux HD668B 
  hide details  
Reply
Main PC
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7-2600k  GIGABYTE Z68 UD4 Gigabyte HD 7950 Windforce 3x Corsair Vengeance 8gb 1600mhz 
Hard DriveCoolingOSMonitor
Seagate 1tb 7200.12 Zalman CNPS20LQ Windows 7 Ultimate 64bit Asus VW246H 
KeyboardPowerCaseMouse
Ducky Shine 2 Cherry MX Red/White LED OCZ ZT Series 550w Corsair 500r Deathadder 3g 
Audio
Superlux HD668B 
  hide details  
Reply
post #3373 of 6656
Quote:
Originally Posted by Skullwipe View Post

I'm still running F7, going stick with my "if it ain't broke" mentality. Until they add new features I see no compelling reason to flash again.

Yeah, I know how you feel. Well the 3D part of the BIOS was broken to me and would cause lockups, it's good now though! biggrin.gif
 
Seven Seven Five
(12 items)
 
 
CPUMotherboardGraphicsRAM
Convertible i5 3570k (De-Lidded) Gigabyte Z77x-D3H XFX R9 290 With Koolance Block (1179/1450) 16GB G-Skill Ares 1866 
Hard DriveHard DriveHard DriveHard Drive
Samsung 840 Evo Seagate Barracuda 2TB Western Digital Green 2TB Samsung Spinpoint 1TB 
Hard DriveOptical DriveCoolingCooling
Western Digital Green 640GB 2x OEM DVD Drives Heatkiller Rev 3.0 XSPC RX360 
CoolingCoolingCoolingOS
Laing D5 + XSPC Res Primochill Bloodshed Red Tubing Koolance Fullcover R9 290x Block Windows 10 Pro x64 
MonitorMonitorMonitorKeyboard
Asus VEH228H Asus VE228H Aavara TS742 Dual Monitor Stand Ducky Shine II Cherry Blue RED Backlit Mechanic... 
PowerCaseMouseMouse Pad
Silverstone Strider 850W HAF 932 Logitech G400 Gigabyte Ghost 
AudioOther
Microlab Solo6c Logitech C100 Webcam 
  hide details  
Reply
 
Seven Seven Five
(12 items)
 
 
CPUMotherboardGraphicsRAM
Convertible i5 3570k (De-Lidded) Gigabyte Z77x-D3H XFX R9 290 With Koolance Block (1179/1450) 16GB G-Skill Ares 1866 
Hard DriveHard DriveHard DriveHard Drive
Samsung 840 Evo Seagate Barracuda 2TB Western Digital Green 2TB Samsung Spinpoint 1TB 
Hard DriveOptical DriveCoolingCooling
Western Digital Green 640GB 2x OEM DVD Drives Heatkiller Rev 3.0 XSPC RX360 
CoolingCoolingCoolingOS
Laing D5 + XSPC Res Primochill Bloodshed Red Tubing Koolance Fullcover R9 290x Block Windows 10 Pro x64 
MonitorMonitorMonitorKeyboard
Asus VEH228H Asus VE228H Aavara TS742 Dual Monitor Stand Ducky Shine II Cherry Blue RED Backlit Mechanic... 
PowerCaseMouseMouse Pad
Silverstone Strider 850W HAF 932 Logitech G400 Gigabyte Ghost 
AudioOther
Microlab Solo6c Logitech C100 Webcam 
  hide details  
Reply
post #3374 of 6656
Quote:
Originally Posted by AP514 View Post

HI all got a EASYTUNE 6 Question..
Board GA-Z77X-D3H
Im not sure if im in correct place for this....feel free to move.
Easytune6 is supposed to regulate case fan speed based off of CPU temp.
I can not get the EasyTune6 to control my 2&3 fan speeds. Other than Fan #1 my fans running off of the board connectors #2/3 run a max RPM.
Anyone have any info on where I can find an aswer to this ? or have an answer to why the 2/3 fans are not regulating
INFO
All my Fans are 3 pin connectors
Fans are set to auto/nornal in bios
Thanks in advace
AP514

Bold added by me.

Per the manual, the only fan header that is controllable with a 3-pin is the cpu. Fan 1-3 controllable only with pwm 4-pin. Fan 4 is 100% all the time.

Quote:
Originally Posted by Matt-Matt View Post

I have the same problem.. We just have to sit and wait for a newer BIOS/Newer ET6 release unfortunatly

Not going to happen.

Quote:
Originally Posted by r3pshow View Post

hey guyz !
just got my Z77X-UD3 !
I'm a noob so please bear with me here !
Q1: I need to know how to update the bios ? and a best bios to choose ?
Q2: How to overclock my 3570k on the UD3 ?
I'd really Appreciate your help ! thanks in advanced !
EDIT: My other specs are :
GPU: GB GTX 670
PSU: Corsiar AX850watt
CPU Cooler: H100
SSD: OCZ vertex 4 128Gb (for OS)
HDD: WD black 1T
RAM: Kingston hyperX16Gb @1600MHz


Q1: RTFM; however I see several others have given you the procedure.
Q2: http://www.overclock.net/t/1247413/ivy-bridge-overclocking-guide-with-ln2-guide-at-the-end
Quote:
Originally Posted by cab2 View Post

I finally put the UD5H inside a case (Lian LI A05N) and the PCH is overheating at idle. System fans run at minimum RPM (750) then a few minutes later PCH goes over 50C and both SYS fans go max 1300rpm. It needs a fan over the z77, holding a fan over it for a few seconds makes temp drop below 50 and fans slow down. Outside the case PCH & mobo temps were in the 30s. I don't like this. The case is still open, no side or top panels installed yet. Any ides?

50 not unusual for the chipset. What is unusual is your fans reacting to it the way they are. Go into ET6 and click on the smart tab and then system fan. click the advanced button and then you can adjust the fan profile. Just play around with it till you get it so that your fans aren't driving you crazy. Make sure you hit the "set" button when you are done to test it out. You can also try using Speedfan too, but I don't know how well that works with this board. I used it on my old ASUS Socket 939 and it worked great. Or get a fan controller smile.gif

Quote:
Originally Posted by McDoney View Post

OK, its was the PSU .After doing a Benchtable Setup and testing a different PSU I checked the 24 Pin Connector and found a loose pin.
Everythings running fine now. OC to 4GHz with 1.070 Volt atm.
Now to assemble that WC setup again. .... Sigh.

Glad you got it sorted. I had a feeling it was not your board or cpu but at least your up and running.

Quote:
Originally Posted by DeXel View Post

I don't recommend even using Marvell ports unless you already filled the remaining Intel 6Gbps and 3Gbps ports.
Fan control on these boards is pretty much bad. You can control fans on CPU and Sys_FAN 1 headers through voltage and PWM. Sys_FAN 2 and 3 support PWM only according to manual.
I never tested SYS_FAN 2 and 3 personally since everytime I decide to get my Intel heatsink out (the only PWM fan that I have is on it), I end up not doing it, so I can't confirm if PWM control even works on these headers.
SYS_FAN 4 as you already know is always 100%.
Hope this helps thumb.gif

According to the manual, only cpu fan header will control a fan via voltage (i.e., 3-pin). Have you tested Sys Fan 1 and determined that it can be controlled via voltage?
post #3375 of 6656
Quote:
According to the manual, only cpu fan header will control a fan via voltage (i.e., 3-pin). Have you tested Sys Fan 1 and determined that it can be controlled via voltage?

Yes I did, and check the manual again. It definitely says voltage control for SYS_FAN 1.
Ivy Bridge
(21 items)
 
Ryzen
(5 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i5 3570K Gigabyte GA-Z77X-UD5H EVGA Geforce GTX 780 Classified Crucial Ballistix Sport 2x8GB 1600Mhz CL9 
Hard DriveHard DriveHard DriveHard Drive
Samsung 830 Western Digital WD1001FALS Samsung HD753LJ ST3300822AS 
Hard DriveCoolingCoolingOS
Western Digital RED 3 TB Custom Loop Lamptron FC Touch Windows 8.1 update 1 Professional 
MonitorKeyboardPowerCase
Dell P2414H CM Storm Quickfire Rapid Red EVGA G2 1000W Cooler Master Cosmos II 
MouseMouse PadAudioAudio
Logitech G502 Logitech G240 Beyerdynamic DT 880 Premium 600 OHM Schiit Valhalla 
Audio
M-Audio AV40 
  hide details  
Reply
Ivy Bridge
(21 items)
 
Ryzen
(5 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i5 3570K Gigabyte GA-Z77X-UD5H EVGA Geforce GTX 780 Classified Crucial Ballistix Sport 2x8GB 1600Mhz CL9 
Hard DriveHard DriveHard DriveHard Drive
Samsung 830 Western Digital WD1001FALS Samsung HD753LJ ST3300822AS 
Hard DriveCoolingCoolingOS
Western Digital RED 3 TB Custom Loop Lamptron FC Touch Windows 8.1 update 1 Professional 
MonitorKeyboardPowerCase
Dell P2414H CM Storm Quickfire Rapid Red EVGA G2 1000W Cooler Master Cosmos II 
MouseMouse PadAudioAudio
Logitech G502 Logitech G240 Beyerdynamic DT 880 Premium 600 OHM Schiit Valhalla 
Audio
M-Audio AV40 
  hide details  
Reply
post #3376 of 6656
Holy smokes!! ive done it !! no cold boots wid i7 2600k and sleep is working also i hope (only happen now by chance). I was just watchin Green Lantern on telly left PC on benchin 3dmark in the back ground when suddenly PC switched OFF after 30min. I pressed Spacebar and PC woke just fine and it retained 5Ghz OC. Ive On & OFF pc like 16 - 17 times now and it has booted all the time.

Checked Power option profile it was set on default balanced ( i usually change this to High performance) keep it on balanced so the volatge drops proper under idle

F8 bios on both MAIN & BACKUP (same exact settings on both i think they both synced now)

You gota leave everything on Auto just change Multi bckl to 100

All the cpu power options c1/c6 turbo etc on auto and vtt 1.050 imc 1.045 set ur cpu voltage im using offset

Also under peripherals leave all those on auto dont enable IGP. Dont choose PEG. I did this many times i think this is the culprit.
I cant beilieve it 3 months or so..FINALLY

(ALLWAYS OFF PSU THEN HIT CMOS RESET) THEN power ON. Load defaults reboot enter bios. Then change your settings (Not much to change to be honest)
Only thing is ive lost ability to use MVP cos i dare not enable IGP. Everything on AUTO except LLC on turbo...Dont even set to extreme phase & fast voltage lve on AUTO.
I re-installed WIN 7 x64 sp1 NEVER EVER leave usb device like your mouse keyboard etc in USB3 ports whilst installin Windows ( i experienced severe issues i thought i lost my data but phew) use only USB 2 (red one at back) This time drivers were all from GB website not newer ones from station drivers.

Will test more later gona hit the sack now 7.05am frown.gif

******** EDIT Sleep not allways working...however after some reading it could be Nvidia drivers related ******

***** Testing F12 now (detects Samsung green wid correct voltage) wid same settings as F8 *****
Edited by irfy - 8/18/12 at 10:12am
post #3377 of 6656
Quote:
Originally Posted by starships View Post

Hi guys, I'm considering the UD5H for my new build but I've read a few things that I want to be sure about.
First off, apparently the TRIM function for SSD drives isn't supported by the controllers on this board, is this correct? I've yet to even use an SSD, is the speed difference with TRIM actually noticeable?
I've read that the system 4 fan header is 100% on all the time on the UD3H, does it also apply to the UD5H? If it does, are the rest of the fan headers working PWM?
TRIM isn't available under RAID with SSD's (yet) but that's not a hardware thing AFAIK.

Quote:
Originally Posted by irfy View Post

Holy smokes!! ive done it !! no cold boots wid i7 2600k and sleep is working also i hope (only happen now by chance). I was just watchin Green Lantern on telly left PC on benchin 3dmark in the back ground when suddenly PC switched OFF after 30min. I pressed Spacebar and PC woke just fine and it retained 5Ghz OC. Ive On & OFF pc like 16 - 17 times now and it has booted all the time.
Checked Power option profile it was set on default balanced ( i usually change this to High performance) keep it on balanced so the volatge drops proper under idle
F8 bios on both MAIN & BACKUP (same exact settings on both i think they both synced now)
You gota leave everything on Auto just change Multi bckl to 100
All the cpu power options c1/c6 turbo etc on auto and vtt 1.050 imc 1.045 set ur cpu voltage im using offset
Also under peripherals leave all those on auto dont enable IGP. Dont choose PEG. I did this many times i think this is the culprit.
I cant beilieve it 3 months or so..FINALLY
(ALLWAYS OFF PSU THEN HIT CMOS RESET) THEN power ON. Load defaults reboot enter bios. Then change your settings (Not much to change to be honest)
Only thing is ive lost ability to use MVP cos i dare not enable IGP. Everything on AUTO except LLC on turbo...Dont even set to extreme phase & fast voltage lve on AUTO.
I re-installed WIN 7 x64 sp1 NEVER EVER leave usb device like your mouse keyboard etc in USB3 ports whilst installin Windows ( i experienced severe issues i thought i lost my data but phew) use only USB 2 (red one at back) This time drivers were all from GB website not newer ones from station drivers.
Will test more later gona hit the sack now 7.05am frown.gif
Glad you got it sorted out. But no reason setting to High Performance in Windows will not let idle voltage drop that I know of. I use HP setting and sleep and no problems for me anyway.
post #3378 of 6656
TRIM is available. wink.gif

Btw,
new BIOS is out.
Edited by stasio - 8/18/12 at 5:49am
Gigabyte
(17 items)
 
  
CPUCPUMotherboardGraphics
Core i7-4790K @ 4.9 GHz Core i7-4770K @ 4.7 GHz GA-Z170X-SOCF /GA-Z97X-SOCF/ GA-Z87X-UD3H  Evga GTS 450 SC 
RAMHard DriveOptical DriveCooling
G.Skill F3-2933C12D-8GTXDG @ 3100 (12-15-14-35-... 2xSSD Corsair Force GS 128 (RAID 0), WD Caviar ... LG 62N SATA XSPC RayStorm D5 EX240 (Liquid Ultra)  
OSMonitorPowerCase
Win 7 SP1,Win 8.1,Win 10 (x64) LG 1960TR Gigabyte Superb 720W NZXT Phantom 630 Ultra Tower  
  hide details  
Reply
Gigabyte
(17 items)
 
  
CPUCPUMotherboardGraphics
Core i7-4790K @ 4.9 GHz Core i7-4770K @ 4.7 GHz GA-Z170X-SOCF /GA-Z97X-SOCF/ GA-Z87X-UD3H  Evga GTS 450 SC 
RAMHard DriveOptical DriveCooling
G.Skill F3-2933C12D-8GTXDG @ 3100 (12-15-14-35-... 2xSSD Corsair Force GS 128 (RAID 0), WD Caviar ... LG 62N SATA XSPC RayStorm D5 EX240 (Liquid Ultra)  
OSMonitorPowerCase
Win 7 SP1,Win 8.1,Win 10 (x64) LG 1960TR Gigabyte Superb 720W NZXT Phantom 630 Ultra Tower  
  hide details  
Reply
post #3379 of 6656
Quote:
Originally Posted by stasio View Post

TRIM is available. wink.gif
Btw,
new BIOS is out.

Statio any change log UD5 F12 ? What is your honest opinion on the UP5. I have a chance to get it at wicked price.
post #3380 of 6656
Barkeater

"Per the manual, the only fan header that is controllable with a 3-pin is the cpu. Fan 1-3 controllable only with pwm 4-pin. Fan 4 is 100% all the time."

FYI. not Correct..................... Fan 1 works w/ 3 pin conector and controls the fans speed from Cpu heat readings.......tested on the -D3H anyway
Too bad the othere Fan controls do not work like they suggested...Back to Asus next time
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › GIGABYTE Z77X Owners/Discussion/Information/Support Thread and Club (UD5H, UD3H, D3H, and ALL)