Overclock.net › Forums › Intel › Intel Motherboards › GIGABYTE Z77X Owners/Discussion/Information/Support Thread and Club (UD5H, UD3H, D3H, and ALL)
New Posts  All Forums:Forum Nav:

GIGABYTE Z77X Owners/Discussion/Information/Support Thread and Club (UD5H, UD3H, D3H, and ALL) - Page 369

post #3681 of 6656
Quote:
Originally Posted by Sin0822 View Post

Hey can you try this: First load optimized defaults. Then clear the CMOS, like really clear it. Take out the battery, disconnect the PSU, and then hit the button. Then load back up and load optimized defaults. Then see if it does that again. Also did you leave the board on auto vcore?

I tried resetting BIOS and loading optimized defaults, the problem is still there. The last BIOS I used before this was F7 and I flashed from F7 to F14.

I didn't have any voltage on auto for the screenshots. I set vcore manually to 1.35v for 4.5ghz and 1.3v for 4ghz. All other voltages were set to "normal", not "auto".

F14 has some kind of bug for my 2500k that gives me 1.5v or higher when I set vcore to 1.35v in BIOS.
post #3682 of 6656
irst 11.6 on intel website
pote reload
(14 items)
 
  
CPUMotherboardGraphicsRAM
intel 3570k@4.4@1.25 gigabyte z77z-ud3h gigabyte gtx460 768mb oc 850/2100 8gb ddr3 1600 corair vengeance blue 
Hard DriveOptical DriveCoolingOS
samsung 500gb hd502hj, 2x crucial m4 64gb raid 0 sony optiarc 24x hyper 212+ win8 x64 
MonitorPowerCaseMouse
envision lcd wide 19 + lg tv lcds 32" 32ld330 1... corsair vx 550w cheapo steelseries ikari laser 
  hide details  
Reply
pote reload
(14 items)
 
  
CPUMotherboardGraphicsRAM
intel 3570k@4.4@1.25 gigabyte z77z-ud3h gigabyte gtx460 768mb oc 850/2100 8gb ddr3 1600 corair vengeance blue 
Hard DriveOptical DriveCoolingOS
samsung 500gb hd502hj, 2x crucial m4 64gb raid 0 sony optiarc 24x hyper 212+ win8 x64 
MonitorPowerCaseMouse
envision lcd wide 19 + lg tv lcds 32" 32ld330 1... corsair vx 550w cheapo steelseries ikari laser 
  hide details  
Reply
post #3683 of 6656
Thread Starter 
Quote:
Originally Posted by r0ach View Post

I tried resetting BIOS and loading optimized defaults, the problem is still there. The last BIOS I used before this was F7 and I flashed from F7 to F14.
I didn't have any voltage on auto for the screenshots. I set vcore manually to 1.35v for 4.5ghz and 1.3v for 4ghz. All other voltages were set to "normal", not "auto".
F14 has some kind of bug for my 2500k that gives me 1.5v or higher when I set vcore to 1.35v in BIOS.

yea i will make sure to report this.
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
post #3684 of 6656
I have a question: what is this ?

Time Killer
(17 items)
 
  
CPUMotherboardGraphicsRAM
Pentium G2030 B75M-D3H ASUS ROG STRIX 1050ti 12GB 1333 
Hard DriveHard DriveHard DriveOptical Drive
1TB Blue (OS/Downloads/Frequents) 1TB Blue (Games) 4TB Seagate (Movies/Storage) ASUS 24X DVD Writer 
CoolingOSMonitorKeyboard
Hyper 212 EVO Win 7 Ultimate x64 Samsung S24C750P Gigabyte Aivia Osmium 
PowerCaseMouseMouse Pad
Corsair TX650M Cooler Master N200 Gigabyte M8600 V2 Whatever works 
Audio
Edifier S550 
  hide details  
Reply
Time Killer
(17 items)
 
  
CPUMotherboardGraphicsRAM
Pentium G2030 B75M-D3H ASUS ROG STRIX 1050ti 12GB 1333 
Hard DriveHard DriveHard DriveOptical Drive
1TB Blue (OS/Downloads/Frequents) 1TB Blue (Games) 4TB Seagate (Movies/Storage) ASUS 24X DVD Writer 
CoolingOSMonitorKeyboard
Hyper 212 EVO Win 7 Ultimate x64 Samsung S24C750P Gigabyte Aivia Osmium 
PowerCaseMouseMouse Pad
Corsair TX650M Cooler Master N200 Gigabyte M8600 V2 Whatever works 
Audio
Edifier S550 
  hide details  
Reply
post #3685 of 6656
Quote:
Originally Posted by Jong1 View Post

Thanks Sin. My idle core temps are <=30C so I'm pretty happy. I guess it gets a bit more complex as the PC comes out of idle, the vcore difference between offset and fixed starts to drop, but the current rises, but I doubt the difference in power draw is ever that significant.
Still, much as I say I am happy with fixed vcore (and I am) the curious side of me is really bugged by why it seems impossible to get this system stable with offset voltage. I have tried all different phase control, LLC and voltage response settings, reduced the overclock to 4.2, even slacked off memory timings. It really doesn't seem to like variable vcore. About all I can think of, other than a MB issue, is the power supply is not up to it, but that is a Corsair TX, so really should have good enough response and it is fine with a fixed voltage.
Any thoughts?
Hey sin, sorry to bump and if you don't reply to this I will never bump it again! But, just in case you missed this post, any thoughts?

My system really does seem hopeless resuming from S3 if I try to use an offset. Doesn't matter what voltage I try or what I do with Phase Control/LLC/Voltage Response. Phase Control seems to help but not enough to get stability.

I'm not that bothered - 1.26 VCore is not so high for 24/7, the temps are fine at idle/low load and the additional power draw of a fixed voltage seems negligible. Still it niggles me! Offset SHOULD work! Any insights are most welcome smile.gif
Main PC
(16 items)
 
HTPC
(16 items)
 
 
CPUMotherboardGraphicsRAM
i7-3770k @4.4 Gigabyte GA-Z77X-UD5H (F14) Sapphire 6970 Corsair Vengeance 2x8GB 
Hard DriveHard DriveHard DriveOptical Drive
OCZ Vertex 4 512GB Seagare Barracuda 1TB Seagare Barracuda 2TB OcUk DVD +-RW x22 
CoolingOSMonitorKeyboard
Prolimatech Genesis Windows 7 Professional x64 Dell 2407WFP Logitech G11 
PowerCaseMouseAudio
Corsair TX 750W V2 Corsair Carbide 500R Logitech G500 Onboard Realtek ALC898 
CPUMotherboardGraphicsRAM
i5-3570k GA-Z77-D3H Sapphire 7750 Ultimate 8GB 
Hard DriveHard DriveHard DriveHard Drive
OCZ Vertex4 128GB Seagate Barracuda 3TB Seagate Barracuda 2TB WD Caviar Green 2TB 
Optical DriveCoolingOSMonitor
LG GGW-H20L Bluray/HDDVD Rewriter Prolimatech Samuel 17 Windows 7 Professional x64 Sony 46x2000 
KeyboardPowerCaseMouse
Logitech S510 Wireless Nesteq Semi-Fanless ASM 450W Silverstone LC20-M Logitech S510 
  hide details  
Reply
Main PC
(16 items)
 
HTPC
(16 items)
 
 
CPUMotherboardGraphicsRAM
i7-3770k @4.4 Gigabyte GA-Z77X-UD5H (F14) Sapphire 6970 Corsair Vengeance 2x8GB 
Hard DriveHard DriveHard DriveOptical Drive
OCZ Vertex 4 512GB Seagare Barracuda 1TB Seagare Barracuda 2TB OcUk DVD +-RW x22 
CoolingOSMonitorKeyboard
Prolimatech Genesis Windows 7 Professional x64 Dell 2407WFP Logitech G11 
PowerCaseMouseAudio
Corsair TX 750W V2 Corsair Carbide 500R Logitech G500 Onboard Realtek ALC898 
CPUMotherboardGraphicsRAM
i5-3570k GA-Z77-D3H Sapphire 7750 Ultimate 8GB 
Hard DriveHard DriveHard DriveHard Drive
OCZ Vertex4 128GB Seagate Barracuda 3TB Seagate Barracuda 2TB WD Caviar Green 2TB 
Optical DriveCoolingOSMonitor
LG GGW-H20L Bluray/HDDVD Rewriter Prolimatech Samuel 17 Windows 7 Professional x64 Sony 46x2000 
KeyboardPowerCaseMouse
Logitech S510 Wireless Nesteq Semi-Fanless ASM 450W Silverstone LC20-M Logitech S510 
  hide details  
Reply
post #3686 of 6656
Hey

Anyone know what was changed from GA-Z77X-D3H Rev 1.0 to Rev. 1.1 ???
post #3687 of 6656
Quote:
Originally Posted by sixor View Post

irst 11.6 on intel website

some people have problem with this version..me to - installed,but its not responding,even after few reboots
back to 11.2.0.1006
post #3688 of 6656
Hi,
I have problem with my PC and hopefully someone could help me.

My setup:
GA-Z77X-UD5H new F14 bios
i7-2600K
Sapphire Radeon HD 7850 OC 2GB (11200-01-20G)
Patriot G2 Series 16GB (2x 8GB) 1333MHz (PGD316G1333ELK)
Enermax ErPRO80+ 500W

When I try to wake up computer from sleep it will cause bool failure (not every time, but mostly).
If I hit the Enter Bios button and then close the bios without saving. Computer will boot. In OS is computer rock stable.

Any idea how to fix it?

Thanks.

Edited by chatumbabub - 9/25/12 at 2:14pm
post #3689 of 6656
Clear CMOS
up your (raise) voltage
Try this;
VTT -1.12v~1.15v
IMC-1.05
VDDR-1.66v
    
CPUMotherboardGraphicsRAM
i7 4930K Rampage IV Gene SLI Evga GTX 780 Classy 16Gb TeamX2400c9 
Hard DriveCoolingOSMonitor
Samsung 840 Pro/ Hitachi Deskstar 1TB  H20 (NexXxoS 420+280) w7x64 VG248QE 
KeyboardPowerMouseAudio
Logitech G110 SuperNOVA 1300 G2 G502 Proteus Core Foobar2K/WASAPI >NuForce Icon HDP >Crack with S... 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 4930K Rampage IV Gene SLI Evga GTX 780 Classy 16Gb TeamX2400c9 
Hard DriveCoolingOSMonitor
Samsung 840 Pro/ Hitachi Deskstar 1TB  H20 (NexXxoS 420+280) w7x64 VG248QE 
KeyboardPowerMouseAudio
Logitech G110 SuperNOVA 1300 G2 G502 Proteus Core Foobar2K/WASAPI >NuForce Icon HDP >Crack with S... 
  hide details  
Reply
post #3690 of 6656
Guys, want to post your ram oc results with this board?
I have some issues with mine, so I thought of this...
Can you guys post bios version, ram stick brand and model, timings and clocks? (also cpu might be nice)
Thanks!
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › GIGABYTE Z77X Owners/Discussion/Information/Support Thread and Club (UD5H, UD3H, D3H, and ALL)