Overclock.net › Forums › Intel › Intel Motherboards › GIGABYTE Z77X Owners/Discussion/Information/Support Thread and Club (UD5H, UD3H, D3H, and ALL)
New Posts  All Forums:Forum Nav:

GIGABYTE Z77X Owners/Discussion/Information/Support Thread and Club (UD5H, UD3H, D3H, and ALL) - Page 418

post #4171 of 6656
The problem with UD5H was that outputs were messed up. Green output was hardwired to something else, and only Windows can dynamically reassign what does what. New revision seems to fix it.

I don't think UD3H had that problem. It uses different codec all together. As far as Mac OS goes, as long as there is VIA driver, it should work. Can't tell anything besides that since it is against OCN terms of conditions.
Ivy Bridge
(21 items)
 
Ryzen
(5 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i5 3570K Gigabyte GA-Z77X-UD5H EVGA Geforce GTX 780 Classified Crucial Ballistix Sport 2x8GB 1600Mhz CL9 
Hard DriveHard DriveHard DriveHard Drive
Samsung 830 Western Digital WD1001FALS Samsung HD753LJ ST3300822AS 
Hard DriveCoolingCoolingOS
Western Digital RED 3 TB Custom Loop Lamptron FC Touch Windows 8.1 update 1 Professional 
MonitorKeyboardPowerCase
Dell P2414H CM Storm Quickfire Rapid Red EVGA G2 1000W Cooler Master Cosmos II 
MouseMouse PadAudioAudio
Logitech G502 Logitech G240 Beyerdynamic DT 880 Premium 600 OHM Schiit Valhalla 
Audio
M-Audio AV40 
  hide details  
Reply
Ivy Bridge
(21 items)
 
Ryzen
(5 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i5 3570K Gigabyte GA-Z77X-UD5H EVGA Geforce GTX 780 Classified Crucial Ballistix Sport 2x8GB 1600Mhz CL9 
Hard DriveHard DriveHard DriveHard Drive
Samsung 830 Western Digital WD1001FALS Samsung HD753LJ ST3300822AS 
Hard DriveCoolingCoolingOS
Western Digital RED 3 TB Custom Loop Lamptron FC Touch Windows 8.1 update 1 Professional 
MonitorKeyboardPowerCase
Dell P2414H CM Storm Quickfire Rapid Red EVGA G2 1000W Cooler Master Cosmos II 
MouseMouse PadAudioAudio
Logitech G502 Logitech G240 Beyerdynamic DT 880 Premium 600 OHM Schiit Valhalla 
Audio
M-Audio AV40 
  hide details  
Reply
post #4172 of 6656
Fair enough, thanks thumb.gif
Bahamut
(22 items)
 
  
CPUMotherboardGraphicsRAM
FX8350 Asus M5A99FX PRO EVGA GTX 960 4GB SSC ACX +2.0 Corsair Vengence LP DDR3-1600 16GB 
Hard DriveHard DriveHard DriveHard Drive
Samsung 840 Evo Kingston V300 Kingston V300 Kingston V300 
Hard DriveCoolingOSOS
Corsair Force GT Corsair H100i Windows 10 Professional Linux Ubuntu 16.04 
MonitorMonitorMonitorKeyboard
Samsung S24D300H 24" LED 1080p  AOC E2060SWD 20" LED 19" Acer LCD 1400X900 Corsair K70 Mechanical Keyboard w/Blue LED 
PowerCaseMouseMouse Pad
Thermaltake Grandpower 850w Antec P380 Azio LED Gaming Mouse Isignia Gaming Pad 
AudioOther
Sades Audio SA-901 7.1 Surround Headphones RainMeter 
  hide details  
Reply
Bahamut
(22 items)
 
  
CPUMotherboardGraphicsRAM
FX8350 Asus M5A99FX PRO EVGA GTX 960 4GB SSC ACX +2.0 Corsair Vengence LP DDR3-1600 16GB 
Hard DriveHard DriveHard DriveHard Drive
Samsung 840 Evo Kingston V300 Kingston V300 Kingston V300 
Hard DriveCoolingOSOS
Corsair Force GT Corsair H100i Windows 10 Professional Linux Ubuntu 16.04 
MonitorMonitorMonitorKeyboard
Samsung S24D300H 24" LED 1080p  AOC E2060SWD 20" LED 19" Acer LCD 1400X900 Corsair K70 Mechanical Keyboard w/Blue LED 
PowerCaseMouseMouse Pad
Thermaltake Grandpower 850w Antec P380 Azio LED Gaming Mouse Isignia Gaming Pad 
AudioOther
Sades Audio SA-901 7.1 Surround Headphones RainMeter 
  hide details  
Reply
post #4173 of 6656
Hey guys, looking for a little help with my UD3H.

I'm currently running at 4.5 GHz with offset mode. I have EIST enabled, both C states disabled, and turbo boost disabled.
My CPU constantly stays at 4.5 GHz and max voltage (1.26 V from CPU-z). Why isn't EIST lowering my clocks/vcore?
Also, when I enable C states I get blue screens. I've seen stop codes 0x3B and 0x101, I looked it up and it means add vcore. So the C states are lowering my vcore too aggressively, correct? Shouldn't I be able to use C states with offset mode?
Pretty much everything else is set to auto, and LLC is set to turbo I believe. 1 step below max.

Other issue: I can't seem to get speedfan to control my fans from the motherboard header. Is there speedfan support for this board yet? Or another program that will work? I have easytune but it's not the greatest, I really liked the functionality and control you get with speedfan.
Big Daddy
(18 items)
 
   
CPUMotherboardGraphicsRAM
Intel Core i5 3570K @ 4.5 GHz Gigabyte Z77X-UD3H EVGA 980 Ti Classified G Skill ripjaws x 16 GB 1866 
Hard DriveHard DriveCoolingOS
Seagate Barracuda 1 TB 7200 RPM Crucial MX 100 Corsair H80i GT Windows 7 Professional 64-bit 
MonitorMonitorKeyboardPower
Asus ROG Swift PG279Q Dell P170S KBP V80 TKL Seasonic X-750 
CaseMouseMouse PadAudio
Fractal Design Define R4 Titanium Grey Logitech G502 Razer Goliathus Speed M Creative Sound Blaster X-Fi Titanium 
AudioOther
AKG K7XX NZXT Mesh 5 Channel Fan Cantroller 
CPUGraphicsHard DriveCooling
Intel Core i7 2620M AMD Radeon HD 6470M Hitachi 320 GB 7200 rpm SED Stock, AC MX-4 
OSMonitorMouseMouse Pad
Windows 7 Professional 64 1600x900 Logitech G700 Razer Goliathus 
Audio
Onboard 
  hide details  
Reply
Big Daddy
(18 items)
 
   
CPUMotherboardGraphicsRAM
Intel Core i5 3570K @ 4.5 GHz Gigabyte Z77X-UD3H EVGA 980 Ti Classified G Skill ripjaws x 16 GB 1866 
Hard DriveHard DriveCoolingOS
Seagate Barracuda 1 TB 7200 RPM Crucial MX 100 Corsair H80i GT Windows 7 Professional 64-bit 
MonitorMonitorKeyboardPower
Asus ROG Swift PG279Q Dell P170S KBP V80 TKL Seasonic X-750 
CaseMouseMouse PadAudio
Fractal Design Define R4 Titanium Grey Logitech G502 Razer Goliathus Speed M Creative Sound Blaster X-Fi Titanium 
AudioOther
AKG K7XX NZXT Mesh 5 Channel Fan Cantroller 
CPUGraphicsHard DriveCooling
Intel Core i7 2620M AMD Radeon HD 6470M Hitachi 320 GB 7200 rpm SED Stock, AC MX-4 
OSMonitorMouseMouse Pad
Windows 7 Professional 64 1600x900 Logitech G700 Razer Goliathus 
Audio
Onboard 
  hide details  
Reply
post #4174 of 6656
To reduce clock speeds you need to have C1E enabled (CPU Enhanced Halt).

These boards don't support fan control on most of the headers. On those that are supported you can do with Speedfan. Go to configure -> advanced-> select IT8728F chip and choice software controlled for PWM1/2/3 mode. Don't forger "remember it" check mark, and you are done.
Ivy Bridge
(21 items)
 
Ryzen
(5 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i5 3570K Gigabyte GA-Z77X-UD5H EVGA Geforce GTX 780 Classified Crucial Ballistix Sport 2x8GB 1600Mhz CL9 
Hard DriveHard DriveHard DriveHard Drive
Samsung 830 Western Digital WD1001FALS Samsung HD753LJ ST3300822AS 
Hard DriveCoolingCoolingOS
Western Digital RED 3 TB Custom Loop Lamptron FC Touch Windows 8.1 update 1 Professional 
MonitorKeyboardPowerCase
Dell P2414H CM Storm Quickfire Rapid Red EVGA G2 1000W Cooler Master Cosmos II 
MouseMouse PadAudioAudio
Logitech G502 Logitech G240 Beyerdynamic DT 880 Premium 600 OHM Schiit Valhalla 
Audio
M-Audio AV40 
  hide details  
Reply
Ivy Bridge
(21 items)
 
Ryzen
(5 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i5 3570K Gigabyte GA-Z77X-UD5H EVGA Geforce GTX 780 Classified Crucial Ballistix Sport 2x8GB 1600Mhz CL9 
Hard DriveHard DriveHard DriveHard Drive
Samsung 830 Western Digital WD1001FALS Samsung HD753LJ ST3300822AS 
Hard DriveCoolingCoolingOS
Western Digital RED 3 TB Custom Loop Lamptron FC Touch Windows 8.1 update 1 Professional 
MonitorKeyboardPowerCase
Dell P2414H CM Storm Quickfire Rapid Red EVGA G2 1000W Cooler Master Cosmos II 
MouseMouse PadAudioAudio
Logitech G502 Logitech G240 Beyerdynamic DT 880 Premium 600 OHM Schiit Valhalla 
Audio
M-Audio AV40 
  hide details  
Reply
post #4175 of 6656
Hey guys,

I'm having a issue... Just installed GTL and when runing for the very first time it shows me this error message: " This Driver can't release to failure!!"

Then, i ckick ok button and the prog starts but with all cpu values empty.

Well, after restart, more error messages when trying to open the prog.
" This Driver can't release to failure!!"
"Open driver handle failure!!"
"Open driver handle failure!!"
" Don't support the chipset of M.B. now!!"
"Open driver handle failure!!"
"Open driver handle failure!!"
"Open driver handle failure!!"
"Open driver handle failure!!"
"Open driver handle failure!!"
"Open driver handle failure!!"

This is how many times it happens before the error disappear . mad.gif
Edited by chris-br - 11/30/12 at 3:24pm
post #4176 of 6656
Make sure that Intel Management Engine is installed, and you are launching GTL with right click run as admin.
Ivy Bridge
(21 items)
 
Ryzen
(5 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i5 3570K Gigabyte GA-Z77X-UD5H EVGA Geforce GTX 780 Classified Crucial Ballistix Sport 2x8GB 1600Mhz CL9 
Hard DriveHard DriveHard DriveHard Drive
Samsung 830 Western Digital WD1001FALS Samsung HD753LJ ST3300822AS 
Hard DriveCoolingCoolingOS
Western Digital RED 3 TB Custom Loop Lamptron FC Touch Windows 8.1 update 1 Professional 
MonitorKeyboardPowerCase
Dell P2414H CM Storm Quickfire Rapid Red EVGA G2 1000W Cooler Master Cosmos II 
MouseMouse PadAudioAudio
Logitech G502 Logitech G240 Beyerdynamic DT 880 Premium 600 OHM Schiit Valhalla 
Audio
M-Audio AV40 
  hide details  
Reply
Ivy Bridge
(21 items)
 
Ryzen
(5 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i5 3570K Gigabyte GA-Z77X-UD5H EVGA Geforce GTX 780 Classified Crucial Ballistix Sport 2x8GB 1600Mhz CL9 
Hard DriveHard DriveHard DriveHard Drive
Samsung 830 Western Digital WD1001FALS Samsung HD753LJ ST3300822AS 
Hard DriveCoolingCoolingOS
Western Digital RED 3 TB Custom Loop Lamptron FC Touch Windows 8.1 update 1 Professional 
MonitorKeyboardPowerCase
Dell P2414H CM Storm Quickfire Rapid Red EVGA G2 1000W Cooler Master Cosmos II 
MouseMouse PadAudioAudio
Logitech G502 Logitech G240 Beyerdynamic DT 880 Premium 600 OHM Schiit Valhalla 
Audio
M-Audio AV40 
  hide details  
Reply
post #4177 of 6656
Ok, i do have the Intel Management Engine installed and when running as admin it does not show me errors, but cpu info stills empty.
post #4178 of 6656
Hi guyz !

i got CORSAIR VENGEANCE 8GB 2133MHZ, and i want to know if UD5H is capable to handle it. It seems, when i choose the XMP Profile, my system doesn't accept them and try to boot 3 times before correction.

So, is there something to do with DDR3 timings ? note that i've upgraded my bios up to the last version.

Thanks to give me some light.
post #4179 of 6656
Note that my memory modules are ok to run at only 1333 mhz
post #4180 of 6656
Have you tried to set frequency, timings and voltage manually? What's your CPU?
Ivy Bridge
(21 items)
 
Ryzen
(5 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i5 3570K Gigabyte GA-Z77X-UD5H EVGA Geforce GTX 780 Classified Crucial Ballistix Sport 2x8GB 1600Mhz CL9 
Hard DriveHard DriveHard DriveHard Drive
Samsung 830 Western Digital WD1001FALS Samsung HD753LJ ST3300822AS 
Hard DriveCoolingCoolingOS
Western Digital RED 3 TB Custom Loop Lamptron FC Touch Windows 8.1 update 1 Professional 
MonitorKeyboardPowerCase
Dell P2414H CM Storm Quickfire Rapid Red EVGA G2 1000W Cooler Master Cosmos II 
MouseMouse PadAudioAudio
Logitech G502 Logitech G240 Beyerdynamic DT 880 Premium 600 OHM Schiit Valhalla 
Audio
M-Audio AV40 
  hide details  
Reply
Ivy Bridge
(21 items)
 
Ryzen
(5 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i5 3570K Gigabyte GA-Z77X-UD5H EVGA Geforce GTX 780 Classified Crucial Ballistix Sport 2x8GB 1600Mhz CL9 
Hard DriveHard DriveHard DriveHard Drive
Samsung 830 Western Digital WD1001FALS Samsung HD753LJ ST3300822AS 
Hard DriveCoolingCoolingOS
Western Digital RED 3 TB Custom Loop Lamptron FC Touch Windows 8.1 update 1 Professional 
MonitorKeyboardPowerCase
Dell P2414H CM Storm Quickfire Rapid Red EVGA G2 1000W Cooler Master Cosmos II 
MouseMouse PadAudioAudio
Logitech G502 Logitech G240 Beyerdynamic DT 880 Premium 600 OHM Schiit Valhalla 
Audio
M-Audio AV40 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › GIGABYTE Z77X Owners/Discussion/Information/Support Thread and Club (UD5H, UD3H, D3H, and ALL)