Overclock.net › Forums › Intel › Intel Motherboards › GIGABYTE Z77X Owners/Discussion/Information/Support Thread and Club (UD5H, UD3H, D3H, and ALL)
New Posts  All Forums:Forum Nav:

GIGABYTE Z77X Owners/Discussion/Information/Support Thread and Club (UD5H, UD3H, D3H, and ALL) - Page 477

post #4761 of 6656
Quote:
Originally Posted by mandrix View Post

Unreal. After many months of not having the dreaded USB 3.0 port failure message, all of a sudden it constantly pops up on one of my UD5H boards.
I broke a pin on the Intel header so I'm using one of the headers on the edge of the board.
I just started using this board again after a few months of using the UP4 TH, and the first thing I did was update the bios and drivers. Aaaaargh!

My other UD5H which has been in use constantly had the error messages related to the USB ports pop up 3 times yesterday after being banished for many months. I'm using the Intel USB 3.0 header on this board. WTH.

Did anyone ever nail down exactly what causes this? I assumed it was the early crappy drivers since I had not seen it in so long, but now it's back for some reason.
Might be time for a new fresh Windows install.

you have to update all other drivers like Intel Management Engine Interface,SATA ,USB 3.0 Driver i say "all" because that's how i got rid of it (probably need one of this but might as well do all of them )
if you did update them all just disregard this
Edited by coolhandluke41 - 2/3/13 at 3:16pm
    
CPUMotherboardGraphicsRAM
i7 4930K Rampage IV Gene SLI Evga GTX 780 Classy 16Gb TeamX2400c9 
Hard DriveCoolingOSMonitor
Samsung 840 Pro/ Hitachi Deskstar 1TB  H20 (NexXxoS 420+280) w7x64 VG248QE 
KeyboardPowerMouseAudio
Logitech G110 SuperNOVA 1300 G2 G502 Proteus Core Foobar2K/WASAPI >NuForce Icon HDP >Crack with S... 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 4930K Rampage IV Gene SLI Evga GTX 780 Classy 16Gb TeamX2400c9 
Hard DriveCoolingOSMonitor
Samsung 840 Pro/ Hitachi Deskstar 1TB  H20 (NexXxoS 420+280) w7x64 VG248QE 
KeyboardPowerMouseAudio
Logitech G110 SuperNOVA 1300 G2 G502 Proteus Core Foobar2K/WASAPI >NuForce Icon HDP >Crack with S... 
  hide details  
Reply
post #4762 of 6656
Quote:
Originally Posted by BobLeProf View Post

Under Windows 8 Pro (USB 3.0 drivers built-in) on my UD5H, I have found inconsistent results from USB 3.0 devices. I have no problems with my Lexar 32GB USB 3.0 Jumpdrive or with my WD My Book 3TB USB 3.0 on either the Intel or Via USB headers. But a Corsair Flash Voyager GT 32 GB USB 3.0 drive only works on the Intel header, giving a USB device not recognized error on all other USB 3,0 ports. I figure the problem is both problematic drivers and problematic hardware (perhaps both the Via chip & the Corsair drive which I have already RMAed once).

BTW On my P55A-UD4P, the USB 3.0 ports produce exactly the same inconsistent results with these devices under Windows 8. That machine has a NEC USB 3.0 controller (do I remember correctly that it was bought by Via?)

Quote:
Originally Posted by Sin0822 View Post

make sure they are in the black headers.

Mandrix, i think there is an option you can set so that those notification don't pop up, i think that was part of the fix for some.

Quote:
Originally Posted by coolhandluke41 View Post

you have to update all other drivers like Intel Management Engine Interface,SATA ,USB 3.0 Driver i say "all" because that's how i got rid of it (probably need one of this but might as well do all of them )
if you did update them all just disregard this

So the board that has been in constant use only had the problems yesterday, today they are gone. Nothing ever quit functioning, so I don't know.
On my other UD5H rig the messages were non stop yesterday for whatever reason.
The only things plugged in are the mouse/KB receiver, and it's in USB 2.0 in the rear. Like I said I plugged the front USB 3.0 into the Via headers on the edge of the board, maybe that's where it's coming from.

Anyway guys thanks for the replies, all drivers up to date AFAIK. Sooner or later I'll get it fixed or I'll put the UP4 back in.
post #4763 of 6656
Quote:
Originally Posted by Sin0822 View Post

make sure they are in the black headers.

Mandrix, i think there is an option you can set so that those notification don't pop up, i think that was part of the fix for some.

Thanks for the response. Yes, they are in the black SATA 2 headers.
Quote:
two WD Blues hooked up to two of the SATA 2 headers

EDIT: What's even stranger, is that after having a few of those RAID related BSOD's, my Logitech G110 Keyboard game profiles keep dissapearing, even after un-and re-installing the Logitech Game Profiler app several times. Every time I boot into Windows from a coldstart, I have to uninstall and then reinstall again to get my Keyboard settings back. The Logitech G9 mouse is still there but the Keyboard goes awol now each time I cold boot.
Edited by 8bitG33k - 2/3/13 at 3:58pm
post #4764 of 6656
On another note, I cant get Intel Rapid Start to work either. Perhaps the two issues are related and there is something wrong with this board.

I should be able to shutdown my PC and when I hit the power button it should be pretty much back on instantaneously. At least that's my understanding of Intel Rapid Sart. Except that I cant get it to work. I shut down my PC and when hitting the power button it boots as it normally would. On a friends ASRock board (with an AMD APU), he demonstrated his 'Instant On' function and I was impressed. He shutdown his PC (ie no fans running) and when he hit the power button his desktop immediately popped up on screen.

According to all the research I've done I should be seeing this (from Sean's SSD thread) (topmost image, circled in red).

However I am only seeing this:
Warning: Spoiler! (Click to show)

No 'Accelerate' Button like it shows in Sean's thread.

Intel Rapid Start is enabled in BIOS.

What am I missing here people?
Edited by 8bitG33k - 2/3/13 at 4:41pm
post #4765 of 6656
Thread Starter 
did you enable rapid start in the UEF?

Did you also set SATA mode selection to RAID? Did you follow the directions in the manual on how to setup RAID? If you have SATA selection mode on IDE, then rapid start BIOS option greys out.
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
post #4766 of 6656
I have intel rapid storage selected in bios and AHCI on my intel sata6 port0 (every other port is disabled since i only need 1 sata port), all power saving options disabled, and just a single ssd system. What you speak of, I dont have it, even though i have rapid storage enabled. I also get the whole boot animation and stuff. I dont know much about what you are talking about, ive heard rapid storage is beneficial for single ssd but i know nothing else about it. I also get the same rapid storage menu as you.
Build In Progress
(17 items)
 
   
CPUMotherboardGraphicsRAM
Haswell i7-4770K 4.8GHz@1.452v/1.97vRIN Gigabyte Z87X-UD3H Older Gigabyte 7950 (H60 Mod) 2x4GB Gskill 2400CL11 Hynix CFRs 
Hard DriveCoolingOSMonitor
Samsung 830 128gb Corsair H110 w/4x 140mm Yate Loon High Blues W7 x64 Ultimate Yarrgh Matey Dell U2312HM Matte IPS 1080p 
MonitorMonitorKeyboardPower
Sanyo DP19640 18.5" 768p KDS Rad-7xp 1024p CM Storm Quickfire Rapids Brown Rosewill Capstone 750 
CaseMouseMouse PadAudio
Bitfenix Shinobi Modded CM Storm Spawn Steelseries Diablo 3 2 set CD Speaker + Big Sub 
Other
Bitfenix Recon Fan Controller Moded 
CPUMotherboardGraphicsRAM
Delidded i7-3770K 5GHz@1.499 Gigabyte Z77X-UD5H 1.1 Sapphire Dual-X 7950 3L Boost 4x2GB Mushkin Ridgeback 2200mhz 8/11/8/27 1.75v... 
Hard DriveCoolingCoolingCooling
Intel X25-M 80GB SSD NH-D14 SE2011 Noctua 120/140/140 Fans 3 x Yate Loon Mediums (Petras) 2 x NZXT Havik 140mm Fans 
OSMonitorMonitorKeyboard
Hax'd W7 Ultimate 64-bit Sanyo DP19640 19'' KDS Radius Rad-7xp 17'' Ducky 1087 MX Brown 10keyless 
PowerCaseMouseMouse Pad
Rosewill Capstone 550w Modular NZXT Source 210 w/Modded Window Razer Deathadder 3.5G Steelseries Blizzcon D3 
AudioAudioOtherOther
Phillips FW-C250 2 Speaker Set w/3 CD Changer JBL Sub 6 Subwoofer NZXT Sleeved LED Strip 1m Blue NZXT Sentry 2 Fan Controller 
Other
Colonial Blue Paracord Sleeving 
CPUMotherboardGraphicsRAM
Phenom ii X4 955C2, $31, 5 broken pins, works! ... Biostar A770e3 6.3 Red&Black MSI GTX 460 768mb Twin Frozr II 2 x 2GB Kingston HyperX 1333 OC to 1348CL7@1.65v 
Hard DriveCoolingCoolingCooling
Intel X25-M G2 80GB SSD NH-D14 SE2011 6 x Case Fans (4 x YL-M, NZXT case fan, CM Hype... Jerryrigged Chipset-Northbridge 80mm HSF 
CoolingOSMonitorKeyboard
Jerryrigged VRM Heatsink (sawed off stock AM2 h... Hax'd W7 Ultimate 64bit Sanyo DP19640 19"1360x768 Ducky Cherry Browns 10keyless 
PowerCaseMouseMouse Pad
Antec Earthwatts 430D NZXT Gamma Steelseries Kinzu Optical Steelseries Blizzcon Diablo 3 
  hide details  
Reply
Build In Progress
(17 items)
 
   
CPUMotherboardGraphicsRAM
Haswell i7-4770K 4.8GHz@1.452v/1.97vRIN Gigabyte Z87X-UD3H Older Gigabyte 7950 (H60 Mod) 2x4GB Gskill 2400CL11 Hynix CFRs 
Hard DriveCoolingOSMonitor
Samsung 830 128gb Corsair H110 w/4x 140mm Yate Loon High Blues W7 x64 Ultimate Yarrgh Matey Dell U2312HM Matte IPS 1080p 
MonitorMonitorKeyboardPower
Sanyo DP19640 18.5" 768p KDS Rad-7xp 1024p CM Storm Quickfire Rapids Brown Rosewill Capstone 750 
CaseMouseMouse PadAudio
Bitfenix Shinobi Modded CM Storm Spawn Steelseries Diablo 3 2 set CD Speaker + Big Sub 
Other
Bitfenix Recon Fan Controller Moded 
CPUMotherboardGraphicsRAM
Delidded i7-3770K 5GHz@1.499 Gigabyte Z77X-UD5H 1.1 Sapphire Dual-X 7950 3L Boost 4x2GB Mushkin Ridgeback 2200mhz 8/11/8/27 1.75v... 
Hard DriveCoolingCoolingCooling
Intel X25-M 80GB SSD NH-D14 SE2011 Noctua 120/140/140 Fans 3 x Yate Loon Mediums (Petras) 2 x NZXT Havik 140mm Fans 
OSMonitorMonitorKeyboard
Hax'd W7 Ultimate 64-bit Sanyo DP19640 19'' KDS Radius Rad-7xp 17'' Ducky 1087 MX Brown 10keyless 
PowerCaseMouseMouse Pad
Rosewill Capstone 550w Modular NZXT Source 210 w/Modded Window Razer Deathadder 3.5G Steelseries Blizzcon D3 
AudioAudioOtherOther
Phillips FW-C250 2 Speaker Set w/3 CD Changer JBL Sub 6 Subwoofer NZXT Sleeved LED Strip 1m Blue NZXT Sentry 2 Fan Controller 
Other
Colonial Blue Paracord Sleeving 
CPUMotherboardGraphicsRAM
Phenom ii X4 955C2, $31, 5 broken pins, works! ... Biostar A770e3 6.3 Red&Black MSI GTX 460 768mb Twin Frozr II 2 x 2GB Kingston HyperX 1333 OC to 1348CL7@1.65v 
Hard DriveCoolingCoolingCooling
Intel X25-M G2 80GB SSD NH-D14 SE2011 6 x Case Fans (4 x YL-M, NZXT case fan, CM Hype... Jerryrigged Chipset-Northbridge 80mm HSF 
CoolingOSMonitorKeyboard
Jerryrigged VRM Heatsink (sawed off stock AM2 h... Hax'd W7 Ultimate 64bit Sanyo DP19640 19"1360x768 Ducky Cherry Browns 10keyless 
PowerCaseMouseMouse Pad
Antec Earthwatts 430D NZXT Gamma Steelseries Kinzu Optical Steelseries Blizzcon Diablo 3 
  hide details  
Reply
post #4767 of 6656
To be sure, these are two separate issues which may or may not be related.

Quote:
Originally Posted by Sin0822 View Post

did you enable rapid start in the UEF?

Did you also set SATA mode selection to RAID? Did you follow the directions in the manual on how to setup RAID? If you have SATA selection mode on IDE, then rapid start BIOS option greys out.

Whenever I set the SATA mode to RAID that's when I get a BSOD. It will boot up to the Windows Logo animation and then bsod.

Quote:
Originally Posted by Belial View Post

I have intel rapid storage selected in bios and AHCI on my intel sata6 port0 (every other port is disabled since i only need 1 sata port), all power saving options disabled, and just a single ssd system. What you speak of, I dont have it, even though i have rapid storage enabled. I also get the whole boot animation and stuff. I dont know much about what you are talking about, ive heard rapid storage is beneficial for single ssd but i know nothing else about it. I also get the same rapid storage menu as you.

I was referring to Rapid Start, not Rapid Storage although the two may be one and the same (see image in prev post). If I understand this correctly, it is the same thing as the Gigabyte EZ Rapid Start Utility. Basically it enters the PC into a low power sleep mode which allows to resume operation almost instantly when turning the PC back on. But when I hit 'Sleep' my PC turns off and on 2 times and then displays the Windows logon screen.

And yes, I did partition my SSD according to the instruction in the manual.
Edited by 8bitG33k - 2/3/13 at 7:11pm
post #4768 of 6656
Gigabyte EZ Rapid Start Utility is easy way to set up Intel Rapid Start. The fact that you are getting BSOD after setting RAID implies that something is wrong with Windows.
Ivy Bridge
(21 items)
 
Ryzen
(5 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i5 3570K Gigabyte GA-Z77X-UD5H EVGA Geforce GTX 780 Classified Crucial Ballistix Sport 2x8GB 1600Mhz CL9 
Hard DriveHard DriveHard DriveHard Drive
Samsung 830 Western Digital WD1001FALS Samsung HD753LJ ST3300822AS 
Hard DriveCoolingCoolingOS
Western Digital RED 3 TB Custom Loop Lamptron FC Touch Windows 8.1 update 1 Professional 
MonitorKeyboardPowerCase
Dell P2414H CM Storm Quickfire Rapid Red EVGA G2 1000W Cooler Master Cosmos II 
MouseMouse PadAudioAudio
Logitech G502 Logitech G240 Beyerdynamic DT 880 Premium 600 OHM Schiit Valhalla 
Audio
M-Audio AV40 
  hide details  
Reply
Ivy Bridge
(21 items)
 
Ryzen
(5 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i5 3570K Gigabyte GA-Z77X-UD5H EVGA Geforce GTX 780 Classified Crucial Ballistix Sport 2x8GB 1600Mhz CL9 
Hard DriveHard DriveHard DriveHard Drive
Samsung 830 Western Digital WD1001FALS Samsung HD753LJ ST3300822AS 
Hard DriveCoolingCoolingOS
Western Digital RED 3 TB Custom Loop Lamptron FC Touch Windows 8.1 update 1 Professional 
MonitorKeyboardPowerCase
Dell P2414H CM Storm Quickfire Rapid Red EVGA G2 1000W Cooler Master Cosmos II 
MouseMouse PadAudioAudio
Logitech G502 Logitech G240 Beyerdynamic DT 880 Premium 600 OHM Schiit Valhalla 
Audio
M-Audio AV40 
  hide details  
Reply
post #4769 of 6656
Your reasoning makes sense and your explanation is to the point.

Well, it's been a week since I installed Windows, so its probably a driver or something.
post #4770 of 6656
Thread Starter 
hey also watch your BBS priorities after you change SATA mode as some order might change.
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › GIGABYTE Z77X Owners/Discussion/Information/Support Thread and Club (UD5H, UD3H, D3H, and ALL)