Originally Posted by Sin0822
some betas have broken screenshot capability, its just something that happens with some betas. if I have a chance i will try it.
Cool. I just wanted to show a new Gigabyte owner some screenies for when he gets his rig running with his UP7. Don't install it if you aren't already using it, Sin,
I guess I could always go back to F14 for a bit and get some screen shots.
On another note, something I finally figured out that had me puzzled for a while, concerning boot loops, restarts and such.
I'm running SSD's on both Intel SATA III ports
SSD & Seagate HDD on Marvell ports
2x WD HDD's & DVD burner on Intel SATA II ports
If the BBS priorities in the BIOS aren't setup as Disk 0 > 1 > 2 > 3 etc with the Marvell ports last
, I often run into boot loops.
Also, I seem to have a SATA data connector that occasionally loses contact with one of the HDD's on a SATA II port. When this happens, I get the exact same boot problem as if the BIOS knows and expects the HDD to be there.
Otherwise if the boot priorities are set up correctly and everything is functioning as it should, zero boot problems.
Just something to check if you run a lot of drives as I do and experience reboots on cold startup.