Okay I just flash f15r bios then. Hopefully the very, very exact timings I set on my ram and tested for 24 hour stability (i literally have every single timing as tight as possible, down to secondary and tertiary, and 24 hour tested) won't be wacked out or unstable when i use a different bios.
Any one knows if the cpu fan header can suppport both d14 fans and control the speed of them even if they are 3 pin fans. My fan controller decided to die well it only provides low speed no more adjustment.
Your NH-D14 should have come with a fan splitter so you can control both of them out of one header. If you don't have one, just email Noctua and they'll provide you one for free, even if you bought your nh-d14 used or something. I just showed them my ebay invoice and they sent me it. Be sure to ask for 3rd fan kit, mounts, etc, whatever you need, as they mail it from austria so better get it all in one package instead of asking for something every other month.
It should have no problem controlling 3 pin fans on a splitter though. I've got my nh-d14 4 pin fans on splitter on the cpu fan header, but you can change it from pwm to 3pin.
Z77-D3H has manual and offset voltage controls. It's a full featured board, just missing SLI is all. I would have bought it if it was cheaper than the ud3h or ud5h or z77x-d3h. Just avoid the micro-atx boards and ds3h.