Overclock.net › Forums › Intel › Intel Motherboards › GIGABYTE Z77X Owners/Discussion/Information/Support Thread and Club (UD5H, UD3H, D3H, and ALL)
New Posts  All Forums:Forum Nav:

GIGABYTE Z77X Owners/Discussion/Information/Support Thread and Club (UD5H, UD3H, D3H, and ALL) - Page 565

post #5641 of 6656
Quote:
Originally Posted by redfaction95 View Post

And also adding that, on every assembly of my p8p67 the situation was same i mean whenever i reassembled my previous setup, the story happened was same, but i always overcome that by MemOK button....which is not here in ud3h

That means the sticks have an issue, and your old motherboard was simply running through the settings until it found some that would allow it to boot. You shouldn't be surprised when memory that's known to have issues continues to have issues on a new board.
post #5642 of 6656
Quote:
Originally Posted by Skullwipe View Post

That means the sticks have an issue, and your old motherboard was simply running through the settings until it found some that would allow it to boot. You shouldn't be surprised when memory that's known to have issues continues to have issues on a new board.

today i also tried changing to vengeance 4gb 1600mhz single ram stick ..........and tried it in each slot but same error 53
and i also checked my both ram sticks in friends computer and they are working fine, he has a gigabyte b75 something.........
post #5643 of 6656
Quote:
Originally Posted by redfaction95 View Post

Bro, i bought them as a kit, used them 1.5years on asus P8P67 board,....and i tried pushing that button too and shorting pins too....but i am wondering that, what do u think, with or without ram sticks it should give 53 .....?

Could the case be shorting the motherboard out?
post #5644 of 6656
I see this board(UD5H) has ESD protection, - does this work?

Not that I will rely on it, as I will still take steps to ground myself, but should my method fail will it be ok?

(I cut the ends of a yellow composite lead off (I have loads of them), - attach one end inside my sock, and the other end tied onto my copper radiator pipe) - silly - yes probably, - effective? - I guess so!

just to confirm?

the black sata ports are intels 3gbs ports and the LIGHT grey ports are my ssd(6gbs) ports?

My front panel header I only have my power, my reset, hd led and power led on my case cables, does this mean that's all I have to connect? I see in te manual something about intrusion header and speakers, - my speakers are usb powered with a 3.5mm jack for the back io panel

Also, I have my hyper on push pull, but I only see cpu-fan, where does my second fan get plugged in? I have sys fan 1/2/3/4, so I guess in there?

My case has 4 fans but they are connected to the cases own controllers
Edited by fatherof3 - 5/31/13 at 4:05am
coolermaster
(11 items)
 
  
CPUMotherboardGraphicsRAM
I5 3570k Gigabyte ud5h EVGA GTX 670 FTW G.SKILL trident x 2400 c10 
Hard DriveCoolingOSMonitor
crucial M4 64GB for O/S, M4 256GBfor games hyper 212 evo push/pull windows 7 home premium retail viewsonic 24" 
PowerCase
nzxt hale90 550w nzxt phantom enthusiast (black) 
  hide details  
Reply
coolermaster
(11 items)
 
  
CPUMotherboardGraphicsRAM
I5 3570k Gigabyte ud5h EVGA GTX 670 FTW G.SKILL trident x 2400 c10 
Hard DriveCoolingOSMonitor
crucial M4 64GB for O/S, M4 256GBfor games hyper 212 evo push/pull windows 7 home premium retail viewsonic 24" 
PowerCase
nzxt hale90 550w nzxt phantom enthusiast (black) 
  hide details  
Reply
post #5645 of 6656
Quote:
Originally Posted by fatherof1 View Post

I see this board(UD5H) has ESD protection, - does this work?

Not that I will rely on it, as I will still take steps to ground myself, but should my method fail will it be ok?

(I cut the ends of a yellow composite lead off (I have loads of them), - attach one end inside my sock, and the other end tied onto my copper radiator pipe) - silly - yes probably, - effective? - I guess so!

just to confirm?

the black sata ports are intels 3gbs ports and the LIGHT grey ports are my ssd(6gbs) ports?

My front panel header I only have my power, my reset, hd led and power led on my case cables, does this mean that's all I have to connect? I see in te manual something about intrusion header and speakers, - my speakers are usb powered with a 3.5mm jack for the back io panel

Also, I have my hyper on push pull, but I only see cpu-fan, where does my second fan get plugged in? I have sys fan 1/2/3/4, so I guess in there?

My case has 4 fans but they are connected to the cases own controllers

The light grey ports are the Intel sata 6GB/s, if you are connecting a ssd remember to set AHCI in the bios. I also think that the Marvell has a sata 6GB/s connector but if you have the option use the Intel ones.

For your front panel header you only have to connect the ones you are going to use, I don't have the reset button connected nor any of the activity lights connected and it still works fine. I don't have my front panel speakers connected to the header due to the cable being too short, but I would connect it if I had the option for convenience.
post #5646 of 6656
Hey sir thanks,

ok, 2 ssd's in my intel ports and my 1 hdd into my intel 3gbs port,

I will just try my 2nd cpu fan in the fan 1 port, and see where it takes me, if I need to come back when its built I will still have at least 1 cooler fan going.

Right im going to shut down now and start.


thanks

Oh, is it best to format my ssd's/hdd now or when I am reinstallin windows? or does it not matter?
coolermaster
(11 items)
 
  
CPUMotherboardGraphicsRAM
I5 3570k Gigabyte ud5h EVGA GTX 670 FTW G.SKILL trident x 2400 c10 
Hard DriveCoolingOSMonitor
crucial M4 64GB for O/S, M4 256GBfor games hyper 212 evo push/pull windows 7 home premium retail viewsonic 24" 
PowerCase
nzxt hale90 550w nzxt phantom enthusiast (black) 
  hide details  
Reply
coolermaster
(11 items)
 
  
CPUMotherboardGraphicsRAM
I5 3570k Gigabyte ud5h EVGA GTX 670 FTW G.SKILL trident x 2400 c10 
Hard DriveCoolingOSMonitor
crucial M4 64GB for O/S, M4 256GBfor games hyper 212 evo push/pull windows 7 home premium retail viewsonic 24" 
PowerCase
nzxt hale90 550w nzxt phantom enthusiast (black) 
  hide details  
Reply
post #5647 of 6656
Quote:
Originally Posted by fatherof1 View Post

Hey sir thanks,

ok, 2 ssd's in my intel ports and my 1 hdd into my intel 3gbs port,

I will just try my 2nd cpu fan in the fan 1 port, and see where it takes me, if I need to come back when its built I will still have at least 1 cooler fan going.

Right im going to shut down now and start.


thanks

Oh, is it best to format my ssd's/hdd now or when I am reinstallin windows? or does it not matter?

I find its best to install Windows with only the drive you are going to install windows to as the windows installer can do some pretty dumb things such as put the bootloader (gpt / mbr) on your D: drive instead of the C: drive where you want it, this can cause some problems.

I would format the boot drive during the installer and then add the HDD afterwards then format the HDD through Disk Managment.
post #5648 of 6656
Quote:
Originally Posted by Sir Noob View Post

I find its best to install Windows with only the drive you are going to install windows to as the windows installer can do some pretty dumb things such as put the bootloader (gpt / mbr) on your D: drive instead of the C: drive where you want it, this can cause some problems.

I would format the boot drive during the installer and then add the HDD afterwards then format the HDD through Disk Managment.

Agreed, I had some issues related to this, was a real pain in the butt. Ended up having to do a reinstall to fix the problem.
post #5649 of 6656
Quote:
Originally Posted by fatherof1 View Post

I see this board(UD5H) has ESD protection, - does this work?

Not that I will rely on it, as I will still take steps to ground myself, but should my method fail will it be ok?

(I cut the ends of a yellow composite lead off (I have loads of them), - attach one end inside my sock, and the other end tied onto my copper radiator pipe) - silly - yes probably, - effective? - I guess so!

just to confirm?

the black sata ports are intels 3gbs ports and the LIGHT grey ports are my ssd(6gbs) ports?

My front panel header I only have my power, my reset, hd led and power led on my case cables, does this mean that's all I have to connect? I see in te manual something about intrusion header and speakers, - my speakers are usb powered with a 3.5mm jack for the back io panel

Also, I have my hyper on push pull, but I only see cpu-fan, where does my second fan get plugged in? I have sys fan 1/2/3/4, so I guess in there?

My case has 4 fans but they are connected to the cases own controllers
The grey ports are Marvells the white are Intels,i says that in the user manual.
post #5650 of 6656
Yeah your right, the white ports are the Intel 6GB/s. Sorry.

I checked on my motherboard to see where I had my drives plugged in. I couldn't see the light grey port as my graphics card was covering it blocking it from view, so I presumed that the white ports where the light grey ports.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › GIGABYTE Z77X Owners/Discussion/Information/Support Thread and Club (UD5H, UD3H, D3H, and ALL)