Hey everyone, I just got this board, and am having some trouble with some of the settings on my UD5H with 3570k. I have it stable at 4.6ghz at 1.305 volts, however, I do not want the processor to get that many volts when idle. However, the only way to change dynamic vcore (DVID) is by setting cpu vcore to "Normal" settings. Normally this would not be a problem, except at "normal" voltages (0.950-1.05volts is what gigabyte sets it at) my computer is unstable at idle and crashes, but it is stable when stressed with prime95. DVID can only be set if cpu vcore is normal on my board, and I was wondering if there was any way to manually set both the CPU Vcore and DVID, so I could have a higher idle voltage at normal than what the board would give it? Thanks!
post #751 of 6656
5/5/12 at 2:12pm