Boys and Girls, men and women today I post some OC profiles, the first post of its kind. Here I post OC profiles for the UD5H and the UD3H and I want you guys to try them out and let me know what I should change on them. Also if you could try them and let me know if they work, I need to see whether it matters if I used a 3570K or 3770K to make the profiles. I have both CPUs so I can always make more profiles just with certain CPUs. I also have SB, so if SB owners could also try these profiles and see if they work.
This profile sharing will totally change teh face of overclocking as we can now provide new users with profiles they can tweak, and everyone is open to provide their own.
To use a profile you will need to open it take the file without extension inside the .RAR and place it on a thumb-drive formatted in FAT32 and then go into your BIOS and load profile from the USB drive.
THis is a .RAR with all the UD3H profiles, it contains a bunch of profiles each in their own .RAR
The vcore is set a bit higher just to make sure the system boots, users can always go decrease the vcore.
First you have the 45G&1600mhz
this is a 4.5ghz OC with 1600mhz XMP profile loaded. I think the Vcore is around 1.3v and you can always lower it.
Next there is the 45GwithDVID
which is a 4.5ghz OC with DVID and power savings enabled, i think vcore is together at max 1.3v, you can always lower the vcore
Next there is the CPUOC
and thus is just made for high CPU oc without memory OC done to it.
Next you have CPUOCwinXP
which is same as the one above, but designed for the system to deal with Windows XP, so HDD/SSD is in IDE mode and the xHCI is set to auto instead of smart auto.
Next you have LN2 profile,
which is designed for LN2 cooling, it doesn't' have a high OC, but it does have stock BCLK higher than 100 and all power savings maxed out.
Next you have memoryfreq
which is the timings loosened for high memory frequency, it is set for cas11, if you want cas12 you will need to change tWL to 9 or 10, i forget. I used this memory profile to take my DDR3 2000mhz cas 9 to 2700 and then i tighten the 3rd timings first and then move onto the other timings.
This is for 4.5ghz and 1600mhz XMP memory: http://www.mediafire.com/?u15dl7pprsjjsir
THis is for 4.5ghz and DVID offset: http://www.mediafire.com/?dk1k7vqywz1oe4d
You will need to use the latest BIOS versions or else you might not have the option to load a BIOS.