Overclock.net › Forums › Intel › Intel Motherboards › GIGABYTE Z77X Owners/Discussion/Information/Support Thread and Club (UD5H, UD3H, D3H, and ALL)
New Posts  All Forums:Forum Nav:

GIGABYTE Z77X Owners/Discussion/Information/Support Thread and Club (UD5H, UD3H, D3H, and ALL) - Page 94

post #931 of 6656
Quote:
Originally Posted by stasio View Post

Latest CPU-Z is 1.60.2 Beta.

That's not the problem. Still trying to nail down exactly what is going on. Flashed bios F6 from GB website, so i Downgraded from F7. On reboot, i loaded optimized defaults then booted into windows.
Rebooted again into bios, then the only things i changed was

set the multiplier to 40
Base clk to 100.00
disable turbo
disable the 4 power saving settings.
save reboot

Now CPUZ shows:
Core Speed 4035.35
Multiplier X40
Bus speed 100.9

I think that looks good.

So not sure exactly what was going on but i still need to tune other areas and not sure how to OC the memory yet.

Anyone have any settings for the samsung 32nm memory?
Ivy 3770K
(14 items)
 
 
ASUS G51J
(4 items)
 
CPUMotherboardGraphicsRAM
i7-3770K Gigabyte GA-Z77X-UD5H EVGA GeForce GTX 550 Ti FPB 1024 MB GDDR5 16G Samsung Electronics Extreme Low Voltage 30nm 
Hard DriveOptical DriveCoolingOS
1 SAMSUNG 830 Series 256GB Samsung 20X DVD Burner Zalman 9700 CPU Cooler Windows 7 Professional X64 
MonitorPowerCase
2 - SAMSUNG BX2331 Glossy Black 23" Full HD LED... OCZ GameXStream 700W Antec P182 
CPURAMHard DriveHard Drive
Pentium E5200 Mushkin Raptor 150 Segate 1.5TB 
Hard DriveHard DriveOS
WD Black 500GB WD Black 500GB WHS 
CPUGraphicsRAMHard Drive
Intel Core i7-720QM (1.6GHz, 1333MHz FSB, 6MB C... NVIDIA GeForce GTX 260M 1GB GDDR3 memory 8GB PC3-8500 DDR3 SDRAM 2 320GB 
  hide details  
Reply
Ivy 3770K
(14 items)
 
 
ASUS G51J
(4 items)
 
CPUMotherboardGraphicsRAM
i7-3770K Gigabyte GA-Z77X-UD5H EVGA GeForce GTX 550 Ti FPB 1024 MB GDDR5 16G Samsung Electronics Extreme Low Voltage 30nm 
Hard DriveOptical DriveCoolingOS
1 SAMSUNG 830 Series 256GB Samsung 20X DVD Burner Zalman 9700 CPU Cooler Windows 7 Professional X64 
MonitorPowerCase
2 - SAMSUNG BX2331 Glossy Black 23" Full HD LED... OCZ GameXStream 700W Antec P182 
CPURAMHard DriveHard Drive
Pentium E5200 Mushkin Raptor 150 Segate 1.5TB 
Hard DriveHard DriveOS
WD Black 500GB WD Black 500GB WHS 
CPUGraphicsRAMHard Drive
Intel Core i7-720QM (1.6GHz, 1333MHz FSB, 6MB C... NVIDIA GeForce GTX 260M 1GB GDDR3 memory 8GB PC3-8500 DDR3 SDRAM 2 320GB 
  hide details  
Reply
post #932 of 6656
Thread Starter 
its 30nm and this board doesn't have XMP, but those sticks will run at 1600mhz off the bat without any changes, you can basically just set ddrr 2200 and see if they boot.
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
post #933 of 6656
Quote:
Originally Posted by Sin0822 View Post

its 30nm and this board doesn't have XMP, but those sticks will run at 1600mhz off the bat without any changes, you can basically just set ddrr 2200 and see if they boot.

ok, so i can leave the timings and voltage on auto?
Im not really shooting for the moon, in the end I would like to be at 4.5 for the cpu and 2400 for the memory.
Ivy 3770K
(14 items)
 
 
ASUS G51J
(4 items)
 
CPUMotherboardGraphicsRAM
i7-3770K Gigabyte GA-Z77X-UD5H EVGA GeForce GTX 550 Ti FPB 1024 MB GDDR5 16G Samsung Electronics Extreme Low Voltage 30nm 
Hard DriveOptical DriveCoolingOS
1 SAMSUNG 830 Series 256GB Samsung 20X DVD Burner Zalman 9700 CPU Cooler Windows 7 Professional X64 
MonitorPowerCase
2 - SAMSUNG BX2331 Glossy Black 23" Full HD LED... OCZ GameXStream 700W Antec P182 
CPURAMHard DriveHard Drive
Pentium E5200 Mushkin Raptor 150 Segate 1.5TB 
Hard DriveHard DriveOS
WD Black 500GB WD Black 500GB WHS 
CPUGraphicsRAMHard Drive
Intel Core i7-720QM (1.6GHz, 1333MHz FSB, 6MB C... NVIDIA GeForce GTX 260M 1GB GDDR3 memory 8GB PC3-8500 DDR3 SDRAM 2 320GB 
  hide details  
Reply
Ivy 3770K
(14 items)
 
 
ASUS G51J
(4 items)
 
CPUMotherboardGraphicsRAM
i7-3770K Gigabyte GA-Z77X-UD5H EVGA GeForce GTX 550 Ti FPB 1024 MB GDDR5 16G Samsung Electronics Extreme Low Voltage 30nm 
Hard DriveOptical DriveCoolingOS
1 SAMSUNG 830 Series 256GB Samsung 20X DVD Burner Zalman 9700 CPU Cooler Windows 7 Professional X64 
MonitorPowerCase
2 - SAMSUNG BX2331 Glossy Black 23" Full HD LED... OCZ GameXStream 700W Antec P182 
CPURAMHard DriveHard Drive
Pentium E5200 Mushkin Raptor 150 Segate 1.5TB 
Hard DriveHard DriveOS
WD Black 500GB WD Black 500GB WHS 
CPUGraphicsRAMHard Drive
Intel Core i7-720QM (1.6GHz, 1333MHz FSB, 6MB C... NVIDIA GeForce GTX 260M 1GB GDDR3 memory 8GB PC3-8500 DDR3 SDRAM 2 320GB 
  hide details  
Reply
post #934 of 6656
Thread Starter 
you prob wont get 2400mhz 24/7 it depends on how good the sticks you have are. I say leave it on auto as there is no XMP profile for it, it sets all the first latencies to 11 lol.
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
post #935 of 6656
Quote:
Originally Posted by Greg4422 View Post

Hello Guys, new user...loving the forum and loving my UD5H despite the minor hiccups. I'm having very similar freezing issues as MaddogBG27 and deyura. PC is mostly stable running at stock speeds, but will randomly freeze requiring a reset and reboot. Currently on bios F8a.
*update* Tried setting the IMC to 1.050 and the CPU Vtt to 1.055, (within .005 of each other)....system froze after about an hour

Okay... my system appears to have stablized, but there's no "ah ha" moment...but rather a series of things I did..from info gleamed for you guys here, and the folks over at tweaktown and anandtech.

I re-seated my CPU
Moved my front panel USB 2.0 from the red powered header to a non powered header
Updated drivers from gigabye website
In addition to raising my IMC to 1.050 and the CPU Vtt to 1.055, (within .005 of each other) I also raised my CPU Vcore to 1.105 (so that it was above the new IMC value..as the default Vcore is above the default IMC value)

450


I also rasied the CPU/PCIe base clock from 100.00MHZ to 100.01MHZ which seems to work for me (some have reported success on 100.10 and 101)

450

I'm posting this in hopes that maybe it can help someone else having "freezing issues" but as I said I can't take credit for any of these ideas... I'm just passing along what I learned from others that help me. Good luck with your build.
Edited by Greg4422 - 5/9/12 at 5:31pm
New Build
(12 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 3770K GIGABYTE GA-Z77X-UD5H LGA 1155 Intel Z77 HDMI S... EVGA GeForce GTX 680 2GB 256-bit GDDR5 PCI Expr... CORSAIR Vengeance 16GB (4 x 4GB) 240-Pin DDR3 S... 
Hard DriveHard DriveOptical DriveCooling
Western Digital Caviar Black 1TB 7200 RPM 64MB ... Intel 313 Series Hawley Creek mSATA 20GB SATA ... LG WH12LS39 Blu Ray Drive stock ): 
OSMonitorPowerCase
Win 7 Home x64 Dell '24 1080 LCD Monitor CORSAIR Professional Series HX650 CM Storm Trooper 
  hide details  
Reply
New Build
(12 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 3770K GIGABYTE GA-Z77X-UD5H LGA 1155 Intel Z77 HDMI S... EVGA GeForce GTX 680 2GB 256-bit GDDR5 PCI Expr... CORSAIR Vengeance 16GB (4 x 4GB) 240-Pin DDR3 S... 
Hard DriveHard DriveOptical DriveCooling
Western Digital Caviar Black 1TB 7200 RPM 64MB ... Intel 313 Series Hawley Creek mSATA 20GB SATA ... LG WH12LS39 Blu Ray Drive stock ): 
OSMonitorPowerCase
Win 7 Home x64 Dell '24 1080 LCD Monitor CORSAIR Professional Series HX650 CM Storm Trooper 
  hide details  
Reply
post #936 of 6656
Thread Starter 
all you really needed to do was set your vcore to 1.1v.
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
post #937 of 6656
Has anyone seen an issue where the reported cpu temperature is stuck at 110C and does not change?
The core temperatures show fluctuation based on load, but the cpu temperature is stuck at 110c.
I have a ga-z77x-d3h gigabyte motherboard with default bios settings (F8 for the bios) and non overclocked 2500K.

See picture:
700
post #938 of 6656
Quote:
Originally Posted by smurfbait View Post

Has anyone seen an issue where the reported cpu temperature is stuck at 110C and does not change?
The core temperatures show fluctuation based on load, but the cpu temperature is stuck at 110c.
I have a ga-z77x-d3h gigabyte motherboard with default bios settings (F8 for the bios) and non overclocked 2500K.
See picture: Warning: Spoiler! (Click to show)
700
Welcome to OCN! thumb.gif

You can ignore that reading since it is clearly bogus. You only need to look at the core temps.

Which program is that BTW? Have you checked to see if there is an updated version?

Personally I use HWiNFO64 since I have found it to be more accurate (fewer bogus readings) than other monitors. It is also frequently updated.
Neurosis
(7 items)
 
Monochrome
(28 items)
 
Patchouli
(11 items)
 
CPUMotherboardGraphicsGraphics
i7 5820K Gigabyte GA-X99 Gaming G1 EVGA GTX-980ti EVGA GTX-980ti 
RAMHard DriveOS
Corsair DDR4 32GB Samsung 950 Pro NVME Windows 10 Pro x64 
CPUMotherboardGraphicsGraphics
i7 2600K @4.5GHz Gigabyte P67A-UD7 B3 EVGA GTX 780 Ti SC 3GB EVGA GTX 780 Ti SC 3GB 
RAMHard DriveOptical DriveCooling
2x4GB Super Talent DDR3-1600 CL9 Western Digital Caviar Black WD1001FALS LiteON iHBS212 EK Supreme HF Copper/Acetal 
CoolingCoolingCoolingCooling
4x Noiseblocker NB-BlackSilentPro PLPS 120mm PW... Bitspower Water Tank Z-Multi 150 Aquacomputer Flow Rate Sensor "High Flow USB" G1/4 Bitspower black compression fittings 
CoolingCoolingCoolingCooling
Tygon silver tubing 0.5" ID 0.75" OD 2x Watercool HEATKILLER® GPU-X³ GTX TITAN/780/7... Alphacool HF D5 acetal pump top Aquacomputer D5 pump (USB/Aquabus) 
CoolingCoolingOSOS
EK CoolStream XTC 420 6x Noiseblocker NB-BlackSilentPro PK-PS 140mm P... Windows 7 x64 Pro Arch Linux x64 
MonitorKeyboardPowerCase
Hewlett Packard LP2475W Ducky Shine II Seasonic X750 Lian Li PC-A77A Silver 
MouseAudioAudio
Logitech MX Revolution RME Fireface 800 Dynaudio BM6A 
CPUMotherboardGraphicsGraphics
i7 2600K Gigabyte GA-Z77X-UD5H Intel HD3000 EVGA GTX980 
RAMHard DriveHard DriveCooling
Corsair Vengeance Western Digital Caviar Black WD1600JD Western Digital WD20EARS (2), WD20EARX (1), WD2... Thermalright HR-02 
OSPowerCase
Ubuntu Server 12.04 LTS x64 Seasonic X760 Lian Li PC-A77F 
  hide details  
Reply
Neurosis
(7 items)
 
Monochrome
(28 items)
 
Patchouli
(11 items)
 
CPUMotherboardGraphicsGraphics
i7 5820K Gigabyte GA-X99 Gaming G1 EVGA GTX-980ti EVGA GTX-980ti 
RAMHard DriveOS
Corsair DDR4 32GB Samsung 950 Pro NVME Windows 10 Pro x64 
CPUMotherboardGraphicsGraphics
i7 2600K @4.5GHz Gigabyte P67A-UD7 B3 EVGA GTX 780 Ti SC 3GB EVGA GTX 780 Ti SC 3GB 
RAMHard DriveOptical DriveCooling
2x4GB Super Talent DDR3-1600 CL9 Western Digital Caviar Black WD1001FALS LiteON iHBS212 EK Supreme HF Copper/Acetal 
CoolingCoolingCoolingCooling
4x Noiseblocker NB-BlackSilentPro PLPS 120mm PW... Bitspower Water Tank Z-Multi 150 Aquacomputer Flow Rate Sensor "High Flow USB" G1/4 Bitspower black compression fittings 
CoolingCoolingCoolingCooling
Tygon silver tubing 0.5" ID 0.75" OD 2x Watercool HEATKILLER® GPU-X³ GTX TITAN/780/7... Alphacool HF D5 acetal pump top Aquacomputer D5 pump (USB/Aquabus) 
CoolingCoolingOSOS
EK CoolStream XTC 420 6x Noiseblocker NB-BlackSilentPro PK-PS 140mm P... Windows 7 x64 Pro Arch Linux x64 
MonitorKeyboardPowerCase
Hewlett Packard LP2475W Ducky Shine II Seasonic X750 Lian Li PC-A77A Silver 
MouseAudioAudio
Logitech MX Revolution RME Fireface 800 Dynaudio BM6A 
CPUMotherboardGraphicsGraphics
i7 2600K Gigabyte GA-Z77X-UD5H Intel HD3000 EVGA GTX980 
RAMHard DriveHard DriveCooling
Corsair Vengeance Western Digital Caviar Black WD1600JD Western Digital WD20EARS (2), WD20EARX (1), WD2... Thermalright HR-02 
OSPowerCase
Ubuntu Server 12.04 LTS x64 Seasonic X760 Lian Li PC-A77F 
  hide details  
Reply
post #939 of 6656
coretemp, the gigabyte bios, and aida64 (newest version) all give the same wrong value.
I'll try hwinfo64 I guess.
I'm leaning toward thinking the temperature sensor is broken on the motherboard or cpu.
post #940 of 6656
Thread Starter 
so in the BIOS it shows that your CPu temperature is 105C? all the time?
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › GIGABYTE Z77X Owners/Discussion/Information/Support Thread and Club (UD5H, UD3H, D3H, and ALL)