Quote:
Then something is wrong with your CPU, each slot has its own traces as well as some shared, perhaps your CPU is messed up.Same thing on another board from another brand on another chip would equal CPu or memory, and since it is only 2 sticks, then it is the CPU.
Also people, let's not argue please.
Quote:
1- if you have no problems then no!Originally Posted by Caramuru 
Guys, I've finished my first build ever! It has a UD5H mobo and I have some doubts.
1 - Shall I update to the latest firmware (F8)?
2 - Why do the CORSAIR Vengeance 8GB (2x4GB) PC3-12800 (DDR3 1600) memories are shown as PC3-10700H (DDR3 1333)? XMP is enable and it's working well. But why the correct information isn't shown in programs like CPU-Z, GB Easy Tune 6 etc.?
System:
I5 3570K
GA-Z77X-UD5H
8GB Corsair Vengeance DDR3 1600
GTX 670 FTW
Corsair HX750

Guys, I've finished my first build ever! It has a UD5H mobo and I have some doubts.
1 - Shall I update to the latest firmware (F8)?
2 - Why do the CORSAIR Vengeance 8GB (2x4GB) PC3-12800 (DDR3 1600) memories are shown as PC3-10700H (DDR3 1333)? XMP is enable and it's working well. But why the correct information isn't shown in programs like CPU-Z, GB Easy Tune 6 etc.?
System:
I5 3570K
GA-Z77X-UD5H
8GB Corsair Vengeance DDR3 1600
GTX 670 FTW
Corsair HX750
2- in CPU-Z what is eh speed under DRAM Frequency? 667mhz or 800mhz?
You loaded XMP through 3D mode or advanced mode in the UEFI?
Quote:
Originally Posted by kesawi 
Has anyone had any success getting SpeedFan to control the system fan headers on a Z77X-UD5H board? Only 3 PWM fans sensors appear under the SPEED tab in SpeedFan. Pwm1 and Pwm3 both seem to jointly control the CPU fan. Pwm2 seems to control the SYS_FAN1 header. My interpretation from the motherboard's user manual is that the SYS_FAN2 and SYSFAN3 headers are also controllable.

Has anyone had any success getting SpeedFan to control the system fan headers on a Z77X-UD5H board? Only 3 PWM fans sensors appear under the SPEED tab in SpeedFan. Pwm1 and Pwm3 both seem to jointly control the CPU fan. Pwm2 seems to control the SYS_FAN1 header. My interpretation from the motherboard's user manual is that the SYS_FAN2 and SYSFAN3 headers are also controllable.
I haven't heard of someone getting it working properly, speedfan might be a bit outdated for the new BIOS and controller. Have you used easytune?




























