Originally Posted by D77ooM
Unfortunately I only have H100 as a liquid cooling
So if you don't mind, can you tell me what exactly do i need ? < with links please
I only need watercooling for the GPU.
Well, you're going to need the following:
Pump - MCP355 is a good starting point
Block - EK Acetal 7970 Block (try to avoid the nickel ones)
Radiator - XSPC EX series, you'll want at least a 240mm for JUST the GPU, or a 360mm for CPU / GPU (can be added together, so a 240 + 120)
Tubing - Primochill. Shoot for 1/2" ID, 3/4" OD if using compression fittings, or 7/16" ID if using barbs.
Killcoil - Silver...its about $5 at any water shop.
Distilled water - A couple of bucks per gallon at the dollar store...buy quite a bit, so you can flush things nicely.
Barbs, or compression fittings - 1/2" barbs, prefarrbly large looking ones, or compression fittings designed for the tubing above.
Honestly, you might as well just do the CPU too, as its just one more block and 2 more fittings, assuming you get enough radiator space (a 360mm radiator will be enough, or a 240+120).
Total cost will be about $300-350 or so for doing it this way.Or you can get an XSPC Rasa RX360 kit (if you can fit a 360 rad), and just add more tubing to it (the stock stuff is junk anyway), and add the EK 7970 block, and you're done.
This would be cheaper, and you could cool everything this way.