Overclock.net banner

Lapped Core 2 Extreme

683 views 16 replies 11 participants last post by  TURN & BURN 
#1 ·
See less See more
4
#9 ·
Quote:


Originally Posted by uberjon

sweet job! but fyi your crazy!!!! a 1k+$$ chip and u sand it down
ur crazy!!! lol

Well chances that you will crew up are Core 2 Duo chips are slims since it doesn't have pins and if you're careful, 99% of the time you won't damage it. But don't be a ****** and use the 250 grits for 2 hours with heavy pressure
 
#10 ·
Nice job there...
 
#11 ·
Quote:


Originally Posted by Mikey122687

Well chances that you will crew up are Core 2 Duo chips are slims since it doesn't have pins and if you're careful, 99% of the time you won't damage it. But don't be a ****** and use the 250 grits for 2 hours with heavy pressure

C2Ds don't have pins?!?!
 
#14 ·
I start w 800 to take it just to the start of copper the the work starts!!!! and a little trick in the end I polish it with a good all cotton cloth for about 25 mins. works wonders, all wet sanding...

Like I said my second one I lapped first one running great and still have another.

Hey Mikey you have the Mobo this one is going in how do you like it??
 
#15 ·
Very nice job!


I know after lapping my first one, I will want to do it to all my future CPU's. It's too bad the MFG doesn't ship them that way. There is plenty of machinery out there that can do it pretty fast. Sheesh, at least make them flat! But on the other hand, that would be taking away all the fun.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top