hey guys!
I think I saw it here, a mod of the led fan button on the CM690, so that you can control led hardware with it.
I was thinking about buying this: http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=72_107_834&products_id=21674
They are flexible, they can be place at the top of my case, front easily, so that I can get some light into my case. At first I was looking for this: http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=72_107_835&products_id=25256 but there is not small one, that I could put under the front fan, to have a smal light just for the front. (I don't know either if one put vertically next to the HDD cage, would light a bit the front).
or this: http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=72_107_840&products_id=3681
http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=72_107_840&products_id=500
what ya guys would choose?
For the main question, with these led, what would I need to modify the wire from the top button (which has a fan connector) to be able to control all led?
Thanks
I think I saw it here, a mod of the led fan button on the CM690, so that you can control led hardware with it.
I was thinking about buying this: http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=72_107_834&products_id=21674
They are flexible, they can be place at the top of my case, front easily, so that I can get some light into my case. At first I was looking for this: http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=72_107_835&products_id=25256 but there is not small one, that I could put under the front fan, to have a smal light just for the front. (I don't know either if one put vertically next to the HDD cage, would light a bit the front).
or this: http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=72_107_840&products_id=3681
http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=72_107_840&products_id=500
what ya guys would choose?
For the main question, with these led, what would I need to modify the wire from the top button (which has a fan connector) to be able to control all led?
Thanks













