Overclock.net › Forums › Cooling › Water Cooling › XSPC wc Kit- One RX240 vs Two RS240 Rads....
New Posts  All Forums:Forum Nav:

XSPC wc Kit- One RX240 vs Two RS240 Rads.... - Page 2

post #11 of 13
Thread Starter 
Better pump would throw me out of budget more than I'd like, thats why I love the kit. I'll probably go with one rad pushpull and hold off on the GPU cooler if it's too much heat on the one radiator. I notice a lot of people loop directly from the cpu to gpu, shouldnt there be a rad in between the two?

Gear mentioned in this thread:

post #12 of 13
Thread Starter 
Quote:
Originally Posted by superericla View Post

When planning out your build, keep in mind that the rs240 only has one inlet and one outlet, both on the same end of the radiator.

Thanks for the reminder, those are just brainstorming, but that could put a ton of length on the loop that I may not want...
post #13 of 13
Thread Starter 
Quote:
Originally Posted by ZealotKi11er View Post

Yeah Push/Pull makes a world of difference with Radiators.
Look at this review.
http://www.overclock.net/t/1235372/xspc-rs360-vs-rx360-360-radiator-shootout-part-1

Pretty substantial, those tests show the RX is not that much better to begin with considering its twice the size, and with $20 spent on some more fans the RS is looking good.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling

Gear mentioned in this thread:

Overclock.net › Forums › Cooling › Water Cooling › XSPC wc Kit- One RX240 vs Two RS240 Rads....