Overclock.net › Forums › Components › Hard Drives & Storage › SSD › Question about using Intel SRT
New Posts  All Forums:Forum Nav:

Question about using Intel SRT

post #1 of 4
Thread Starter 
So I currently have my OS installed on a 120 GB Intel 310 SSD and I have a separate 1 TB Western Digital Black Caviar HDD for storage as well as most of my games (Steam folder). I've been thinking of getting a smaller 60 GB SSD and setting up SRT on the secondary drive but most guides I've seen don't mention using SRT on a secondary drive. Is it possible to do this?

If so I'd end up with:

- Windows 7 installed on 120 GB Intel SSD
- 60 GB SSD and 1 TB HDD RAIDed and in SRT as secondary storage.

Also would I be required to reformat my whole computer or just the Western Digital drive?

Thanks!
post #2 of 4
Yes you can I am dong it right now.

No reformat needed, just make sure your SATA mode it set to RAID.
post #3 of 4
Thread Starter 
Oh awesome! SO if I got a 60GB SATA III SSD and plugged it into a SATA II port like my HDD currently is and enable RAID and then install the SRT software my computer start chaching the HDD with the new SSD? That sounds deceptively easy tongue.gif
post #4 of 4
It is easy, guide in the stickies.

To change SATA mode to RAID is also in the stickies.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: SSD
Overclock.net › Forums › Components › Hard Drives & Storage › SSD › Question about using Intel SRT