Originally Posted by Bdonedge
Hey this may be a stupid question but ill ask anyway. So I got the board but I have my ram coming. I ordered the corsair 16gb 4x4gb that was on the supported memory list for the mobo but I saw someone say that the ram was quad channel not dual channel, will all 4 sticks work if used in pairs in the dual channel slots that this mobo has?
I am using 4x4GB ram in my system. It works fine.
Originally Posted by Bazinga69
4.1 ghz on 3570k with stock intel cooler thanks for the help guys.
Is my Vcore to low? i cant run p95:
When you run p95 what happens? If it dies, or your system BSODs, then you may need a bit more vcore.
I noticed you have a 40x multiplier, but you also have your Bus Speed at 103.02. It would be better if you set Bus to 100.0 in BIOS and moved your multiplier to 41x. Then see what it does. If it still does not run, bump your vcore like 0.01-0.05v or so and see if it runs. Keep bumping until it does. Then you can consider lowering it a bit if you were bumping by 0.05v. Otherwise, you are probably where you need to be. Then check some other programs (IBT, Cinebench, Heaven, 3Dmark11) and the programs & games you like to use.