Originally Posted by MKHunt
Originally Posted by Bazinga69
ok new bios is flashed, it reset all of my settings but for some reason i still have the boot logo from my old one. i am currently installing w7 with just the quadro installed, the 570 will be added later. ooh and my trackpad on my laptop isn't working, lovely.
The 1805 logo is the same as the 1708, but different than the 15xx. If the logo is the same as the 15xx then its an incomplete flash or something.
I read somewhere that you might need multi monitor to use both cards since the quadro cannot render on a display plugged into the gtx.
I am using two displays as extended, and no i was using 1805 before, and its showing my custom logo i made a while ago for an 1805 bios that i flashed. also its all up with no 570 in it yet, still installing updates, drivers, and software. will be downloading 3ds max soon then the 3ds max quadro performance driver. the only thing im questioning is that when i right click, it looks like when i right click in w8 not w7???? like
go home microsoft, your druink
EDIT: i would also like to note that i believe my psu to be fried if not close to it. things like fans and my h80 will run on low settings while turned off and i noticed that after i ran my system at max for 59 hours rendering out a mid term. i will have to replace that before i will try to do anything else as a believe that could be a reason for gpu's to suddenly stop pushing anything but black pixels. i am on my way to xfx.com to check for warranty.
EDIT#2: this is what i sent them
I purchased an XFX pro 750W core edition power supply, and I am 90% sure that it is what is causing my problems. I am not sure if I have voided the warranty by removing this sticker but the pamphlet that came with the power supply said that the warranty was void if the psu was opened. I still have the sticker, it is just not on the power supply at this time.
I had to render out a mid term movie that took 59 hours to render, but I was monitoring the ambient temps, and the temps of my components and everything was fine.
Now whenever I turn my pc off, some of the things that are plugged directly into the psu will stay on at very low voltages. For example the fans that I do have plugged into the power supply instead of the mother board will run the led’s very dimly and the fans will run at a very low speed. In addition to that, my pump for my liquid cooling system will keep the lights on very dimly and will also run at very low speeds. I am also afraid that it might have either fried the pcie lanes on my motherboard or my quadro card. When I do finally boot into windows ( I have tried 7 and 8 ) my screens will go black before I can log in, I believe it is because there is a power drop to my graphics cards.
You advertise a five year five star warranty and I have only had it for one year and 4 to 5 months. Please reply to me with what I can do to get a new power supply.
Thanks in advance,
EDIT #3: this is my new peak load with the quadro installed on my 750w psuEdited by jktmas - 4/6/13 at 5:25pm