Originally Posted by invincible20xx
OK under the Ai Tweaker section, set the Memory Frequency to DDR3-2400. Go to the DRAM Timing Controls, set CAS Latency = 11, RAS to CAS Delay = 13, RAS Pre Time = 13, RAS Act Time = 35, Command Mode = 2. Leave the rest of the timings on Auto. Go back to the Ai Tweaker page and set the DRAM Voltage = 1.65 V. That's it!
Leave the VCCSA setting on Auto for now. If you still can't get things going, then try to increase it a bit as mentioned above.