First time system builder here, recently bought this case to replace my CM elite 430. Everything worked out fine, except that i can't seems to get the fan controller to work and the manual doesn't specify how the fan controller cables should be connected. I'm 4 fans in total, 2 120mm default fan intake, 1 default top 140mm and 1 120mm from my old case.
There are 6 of those small connectors, 2 of them already connected to 2 of the fans by default and 4 of them currently not connected to anything. And there is the big molex connector, it is connected to the PSU and one of the fans.
Tried changing the configuration of the fan connections, but it doesn't seems to work. The rear fan from my old case still sound as loud as it was running at 12V (This fan normally runs at 7v back in my old case, and it's pretty quiet at 7v)
If anyone can help, i'd appreciate it. Sorry that i can't provide any pictures but if you need me to describe further, say so.
Edited by hoven - 4/23/12 at 8:26am
There are 6 of those small connectors, 2 of them already connected to 2 of the fans by default and 4 of them currently not connected to anything. And there is the big molex connector, it is connected to the PSU and one of the fans.
Tried changing the configuration of the fan connections, but it doesn't seems to work. The rear fan from my old case still sound as loud as it was running at 12V (This fan normally runs at 7v back in my old case, and it's pretty quiet at 7v)
If anyone can help, i'd appreciate it. Sorry that i can't provide any pictures but if you need me to describe further, say so.
Edited by hoven - 4/23/12 at 8:26am
Rig
(9 items) |
|
Rig
(9 items) |
