Its a native registry setting magnified outside the sensors recommended or specified parameters.
Zowie EC/AM uses a 3rd Party lens developed by their OEM. I don't really think too highly of this solution, but I suppose it works for their target audience.
Depends on screen resolution and frame rate. Typically this issue wont happen outside of CS1.6/QL (Capped FPS + low res = bad)
Or it could use the 3500 reg with a smaller lens magnification, but I've doubted that due to the lens size. Hence, why I still assume it's 1.25x like the original EC. The only discrepancy I have is the lower step. I think they made a small error with calculating the values.
Placement seems to be modified (In comparison to the original)
Edited by Skylit - 5/16/12 at 9:31pm
Zowie EC/AM uses a 3rd Party lens developed by their OEM. I don't really think too highly of this solution, but I suppose it works for their target audience.
Quote:
Originally Posted by SoFGR 
if you play low sens ( like 50cm/360 ) your best bet is the 450dpi seting, 1150 will give you neg accel if you push it, and 2300 needs raw input / direct input or else you're screwed
if you play low sens ( like 50cm/360 ) your best bet is the 450dpi seting, 1150 will give you neg accel if you push it, and 2300 needs raw input / direct input or else you're screwed
Depends on screen resolution and frame rate. Typically this issue wont happen outside of CS1.6/QL (Capped FPS + low res = bad)
Quote:
2300 is 1800dpi ( avago 3090 native ) with 1.25x magnification due to the custom lens, zowie AM had quite a bit of cursor jitter on this setting, no idea how they managed to get away with jitter this time
Or it could use the 3500 reg with a smaller lens magnification, but I've doubted that due to the lens size. Hence, why I still assume it's 1.25x like the original EC. The only discrepancy I have is the lower step. I think they made a small error with calculating the values.
Placement seems to be modified (In comparison to the original)
Edited by Skylit - 5/16/12 at 9:31pm
