Overclock.net › Forums › Components › Other Peripherals › Anyone know ANYTHING about wall mounts for a TV?
New Posts  All Forums:Forum Nav:

Anyone know ANYTHING about wall mounts for a TV?

post #1 of 5
Thread Starter 
I dont anything about wall mounts..

I have a Samsung 32" LED, Model # LN32D430 and I was looking for a quality wall mount from a reliable site (or store).. I wouldnt mind one that can swivel or rotate.. Since I may be mounting it kind of in a corner..

I would greatly appreciate anyone with an insight into wall mounts for LEDs. I am looking for one that is easy to mount on the wall and is compatible with the TV I have..

Ive seen some places charging over $100, while others only charge $30-$50, but then have customers that say they never got their product..

Thanks for any help!
post #2 of 5
Monoprice. I've mounted a ton of tvs with their arms. The 28" I-inc I'm on right now is using this one - http://www.monoprice.com/products/product.asp?c_id=108&cp_id=10828&cs_id=1082802&p_id=3411&seq=1&format=2

The strength is total overkill. Just check that they fit your vesa measurement.

edit: By tv's I mean up to 50 inch and over heavy plasma (not with this specific mount, but with others from their store). Their mounts are the best deal around
Edited by mobius9 - 4/23/12 at 6:20pm
post #3 of 5
Thread Starter 
Quote:
Originally Posted by mobius9 View Post

Monoprice. I've mounted a ton of tvs with their arms. The 28" I-inc I'm on right now is using this one - http://www.monoprice.com/products/product.asp?c_id=108&cp_id=10828&cs_id=1082802&p_id=3411&seq=1&format=2
The strength is total overkill. Just check that they fit your vesa measurement.
edit: By tv's I mean up to 50 inch and over heavy plasma (not with this specific mount, but with others from their store). Their mounts are the best deal around

I spoke with the techs on there site. Very helpful and I think I will go with this one.

http://www.monoprice.com/products/product.asp?c_id=108&cp_id=10828&cs_id=1082806&p_id=7846&seq=1&format=2

With shipping its $50. Which isnt bad at all.

I could of went with a $15 model, but I was looking for an arm that could extend alittle further since it would be in the corner(ish) and its a 38" and those kinda stopped at 37" lol even now my TV doesny wieght alot.. $15 to be on the safe side and have a longer arm isnt bad
Edited by JMattes - 4/23/12 at 6:48pm
post #4 of 5
Seems like the arms are about the same length, so this is more or less what you're going to be looking at. Granted my monitor is a 28" 16:10, but this should give the general picture. The extra length is worth it.

The only other advice I'd give is to mount a piece of good quality wood to the wall, and then mount the arm onto the wood since the screw holes on mine are wider spaced with typical house 2x4s.

450
Edited by mobius9 - 4/25/12 at 1:32am
post #5 of 5
Thread Starter 
Thanks for the pic and advice!

Mibe should be coming on Monday and should have it.on the wall mid week. Ill take a few pictures after its.up
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Other Peripherals
Overclock.net › Forums › Components › Other Peripherals › Anyone know ANYTHING about wall mounts for a TV?