Hello guys! Since the debut of my bracket to mount the Antec 620/920 and Corsair H40/H50/H70 on the GPUs I have been asked about the other Corsair series so here you have it.
This is the basic bracket in rough draft form. Tomorrow comes the one that will hold a 92mm fan.
Thats the bracket on the top right. You take out the 4 screws in the corners of the bottom plate of the pump and use them to mount the bracket.




Can someone measure the H80 and H100 for me, Im pretty sure the bottom is the same but I would like to make sure.

This is the basic bracket in rough draft form. Tomorrow comes the one that will hold a 92mm fan.
Thats the bracket on the top right. You take out the 4 screws in the corners of the bottom plate of the pump and use them to mount the bracket.




Can someone measure the H80 and H100 for me, Im pretty sure the bottom is the same but I would like to make sure.



















