Originally Posted by blazed_1
From munaim1s guide; "Leave C1E and Speedsteep enabled and run C3 and C6 on Auto if you can, if not leave them enabled."
As Murlocke said the 1344 and 1792 custom fft's are great at finding instability on SB for initial stress testing. It's also a good idea to go for 18+hrs instead of 12 of custom blend test. Only doing 12 hrs will not test it with all of the fft's. And yes 101 is vcore (more then likely) so I would start there.
Also if you ever miss a bsod code here's a program that will show the codes for you;http://www.nirsoft.net/utils/blue_screen_view.html
Yeah I did have C3 & C6 on auto all along but switched them to disabled just the other day because I thought they might be the issue. Also I'm pretty sure his overclocking guide says to switch them to disabled if you use offset voltage right!?
I think I may go for a longer blend test next time yeh. I passed the 1344's and 1792's before the 12 hour blend test. The problem was that I was doing a standard blend test which has a low RAM usage and also wasn't changing the RAM usage with the custom FFT's. I wont make that mistake anymore though!
The Sandy Stable club front page says that 101 is Vcore so it's likely. I'm just having a little mess around with VCCIO, PLL and Spread Spectrum first to see if it can last any longer. Then I'll go for Vcore.
I am using Blue Screen View already btw. Thanks for the tip
Just wondering with PLL voltage. What affect will having PLL Overvoltage enabled do in the BIOS if I set PLL voltage manually? Especially if I set it below standard PLL voltage? Don't know if I should disable that setting or not...