Overclock.net › Forums › Intel › Intel CPUs › [Official] The Ivy Bridge Stable / Suicide Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET
New Posts  All Forums:Forum Nav:

[Official] The Ivy Bridge Stable / Suicide Club **Guides, Voltages, Temps & BIOS Templates** Inc... - Page 48

post #471 of 3312
Quote:
Originally Posted by Nihilo View Post

Nice, but keep watching it. It will hit in the 90s later into P95 and that's where you need to be careful.

No, he won't hit 90C. His prime have been running over 18 hours and his max temp is 86C.
My System
(15 items)
 
  
CPUMotherboardGraphicsRAM
i5-3570K @4.5GHz ASRock Z77 Extreme6 EVGA GTX 670 FTW @ 1246/6804 4x2GB 2000MHz DRR3 
Hard DriveHard DriveOptical DriveCooling
Secondary: 2TB 7200rpm Secondary: 640GB 7200rpm Main: Crucial M4 128GB ASUS Blu-ray player CoolerMaster V6GT 
OSMonitorPowerCase
Windows 7 Home Premium 64bit Acer G235H 23" 1920x1080  XTREMEGEAR 950W AZZA Hurricane 2000 
  hide details  
Reply
My System
(15 items)
 
  
CPUMotherboardGraphicsRAM
i5-3570K @4.5GHz ASRock Z77 Extreme6 EVGA GTX 670 FTW @ 1246/6804 4x2GB 2000MHz DRR3 
Hard DriveHard DriveOptical DriveCooling
Secondary: 2TB 7200rpm Secondary: 640GB 7200rpm Main: Crucial M4 128GB ASUS Blu-ray player CoolerMaster V6GT 
OSMonitorPowerCase
Windows 7 Home Premium 64bit Acer G235H 23" 1920x1080  XTREMEGEAR 950W AZZA Hurricane 2000 
  hide details  
Reply
post #472 of 3312
Quote:
Originally Posted by iSeries View Post

I am using x264 from the command line.
PS if you are using MeGui with any intermediate AVISynth filters this will affect temps especially if you are using the single-threaded version of AVISynth. Plus a lot of AVISynth filters are 32 bit only.

Hmm I use an AVI script to link up my videos but I don't think I am using a filter. Fairly new to encoding so I just use things that work at the moment.
Good to know thanks.
Rig 2.0
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 3770k Asus P8Z77-V EVGA GTX 470 SC Samsung DDR 3 (2 DIMMS) MV-3V4G3D/US 
Hard DriveHard DriveOptical DriveCooling
Samsung 830 SSD WD Caviar Black Asus DVD/RW Xigmatek s-1283 HDT (Air Cooling) 
CoolingCoolingOSMonitor
Scythe Slipstream 1200RPM (x2) Antec 140mm + Antec 120mm + Xigmatek 120mm (x2) Win 7 64bit Acer S243HL bmii - 24" 
PowerCaseMouseAudio
Corsair TX750 Corsair Carbide 300R MX 518 Auzentek X-Fi Forte 7.1 
  hide details  
Reply
Rig 2.0
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 3770k Asus P8Z77-V EVGA GTX 470 SC Samsung DDR 3 (2 DIMMS) MV-3V4G3D/US 
Hard DriveHard DriveOptical DriveCooling
Samsung 830 SSD WD Caviar Black Asus DVD/RW Xigmatek s-1283 HDT (Air Cooling) 
CoolingCoolingOSMonitor
Scythe Slipstream 1200RPM (x2) Antec 140mm + Antec 120mm + Xigmatek 120mm (x2) Win 7 64bit Acer S243HL bmii - 24" 
PowerCaseMouseAudio
Corsair TX750 Corsair Carbide 300R MX 518 Auzentek X-Fi Forte 7.1 
  hide details  
Reply
post #473 of 3312
Quote:
Originally Posted by IronWill1991 View Post

No, he won't hit 90C. His prime have been running over 18 hours and his max temp is 86C.

Nice. I didn't see the picture clearly and didn't look close enough at the date. I thought it was a 6 min run rolleyes.gif But I looked closer, that's a nice chip he's got there! I'm definitely jealous thumb.gif
Edited by Nihilo - 5/17/12 at 10:07am
post #474 of 3312
Quote:
Originally Posted by Nihilo View Post

Quote:
Originally Posted by bebimbap View Post

OK guys here as promised 4.7ghz on AIR I could probably tune the volts down a little but I was checking CPU PLL more than anything.
I'll be back with 4.8ghz later
375

Nice, but keep watching it. It will hit in the 90s later into P95 and that's where you need to be careful.

But that's already a 16 hour run. When do your peak temps show up? If my climate is fully under control, my hottest core always shows up between hours 1 and 2.

Great screenshot, bebimbap. Lot's of relevent info. +Rep
COMPUTER
(16 items)
 
  
CPUMotherboardGraphicsRAM
3570K Gigabyte GA-Z77X-UD3H Gigabyte GTX 670 Windforce OC 2GB Samsung 30nm 
Hard DriveHard DriveCoolingOS
WD Caviar Blue WD Caviar Black NZXT Havik 140 Windows 7 64bit 
OSMonitorKeyboardPower
Windows 8 64bit ASUS GD235HZ (GD245HQ) 120Hz Dell OCZ GameXStream 850W 
CaseMouseMouse PadAudio
Corsair Carbide 300R Logitech G9 naked Allsop Black Cloth (low profile) Logitech G35 Surround 
  hide details  
Reply
COMPUTER
(16 items)
 
  
CPUMotherboardGraphicsRAM
3570K Gigabyte GA-Z77X-UD3H Gigabyte GTX 670 Windforce OC 2GB Samsung 30nm 
Hard DriveHard DriveCoolingOS
WD Caviar Blue WD Caviar Black NZXT Havik 140 Windows 7 64bit 
OSMonitorKeyboardPower
Windows 8 64bit ASUS GD235HZ (GD245HQ) 120Hz Dell OCZ GameXStream 850W 
CaseMouseMouse PadAudio
Corsair Carbide 300R Logitech G9 naked Allsop Black Cloth (low profile) Logitech G35 Surround 
  hide details  
Reply
post #475 of 3312
Here is my official stable 3770K HT @ 4500 and Vcore @ 1.232 V.

Running at 12 hours 30 P95 custom blend 85% memory. I told you guys it was stable.

My goal was to have max temp under 80. In BIOS I have Vcore set to 1.2 and PLL V set to 1.65. I know I can get lower voltage with my setup and does anyone know what I should set it to and how to stress test it. I don't think I need to run a blend on P95 I should be running custom FFTs to test CPU only not MEM anyone know what FFTs min and max to use and time to run each FFT to first get your CPU stable. I am thinking to decrease Vcore to 1.8 in Bios. Please advise. Thank you.

Here is my official Ivy Bridge Stable club:

277
post #476 of 3312
Quote:
Originally Posted by Gauntlet3h View Post

Here is my official stable 3770K HT @ 4500 and Vcore @ 1.232 V.
Running at 12 hours 30 P95 custom blend 85% memory. I told you guys it was stable.
My goal was to have max temp under 80. In BIOS I have Vcore set to 1.2 and PLL V set to 1.65. I know I can get lower voltage with my setup and does anyone know what I should set it to and how to stress test it. I don't think I need to run a blend on P95 I should be running custom FFTs to test CPU only not MEM anyone know what FFTs min and max to use and time to run each FFT to first get your CPU stable. I am thinking to decrease Vcore to 1.8 in Bios. Please advise. Thank you.
Here is my official Ivy Bridge Stable club:
277

Just curious, are you doing offset or manual?
post #477 of 3312
Running my 3770k @ 4.5 with 1.235 vcore, ultra high (75%) LLC currently (P8Z77 WS). Cpu-Z reads 1.240v on idle and about 1.232v on full load. Is that too high?

I'm about 15 hours into Prime95 default blend (latest version) right now. No errors or crashes yet.

Temps maxes out at 77C on the hottest core. This is with a H100 with 2x AP14 on push. Might do a remount tomorrow.

Hopefully I can pass the 24 hour mark. If I do, I will push it to 4.6 with the same settings.
Ivy
(16 items)
 
  
CPUMotherboardGraphicsRAM
I7 3770k Asus P8Z77 WS Asus GTX 680 2GB Crucial Ballistix Elite 16GB 1866 
Hard DriveHard DriveHard DriveCooling
Intel 520 240GB SSD Intel 510 250GB SSD Intel 320 80GB SSD Corsair H100 2x AP-14 
OSMonitorKeyboardPower
Windows 7 Pro x64 Sony FW 900 24" CRT Steelseries 7G Corsair AX850 
CaseMouseMouse PadAudio
Coolmaster Cosmos 2 Intellimouse Optical 1.1 Allsop Raindrop XXL Auzentech Forte 
  hide details  
Reply
Ivy
(16 items)
 
  
CPUMotherboardGraphicsRAM
I7 3770k Asus P8Z77 WS Asus GTX 680 2GB Crucial Ballistix Elite 16GB 1866 
Hard DriveHard DriveHard DriveCooling
Intel 520 240GB SSD Intel 510 250GB SSD Intel 320 80GB SSD Corsair H100 2x AP-14 
OSMonitorKeyboardPower
Windows 7 Pro x64 Sony FW 900 24" CRT Steelseries 7G Corsair AX850 
CaseMouseMouse PadAudio
Coolmaster Cosmos 2 Intellimouse Optical 1.1 Allsop Raindrop XXL Auzentech Forte 
  hide details  
Reply
post #478 of 3312
Quote:
Originally Posted by christpunchers View Post

Running my 3770k @ 4.5 with 1.235 vcore, ultra high (75%) LLC currently (P8Z77 WS). Cpu-Z reads 1.240v on idle and about 1.232v on full load. Is that too high?
I'm about 15 hours into Prime95 default blend (latest version) right now. No errors or crashes yet.
Temps maxes out at 77C on the hottest core. This is with a H100 with 2x AP14 on push. Might do a remount tomorrow.
Hopefully I can pass the 24 hour mark. If I do, I will push it to 4.6 with the same settings.

No, that's not too high. That's the lowest voltage I can go at that speed and I'm stable.
post #479 of 3312
Quote:
Originally Posted by christpunchers View Post

Running my 3770k @ 4.5 with 1.235 vcore, ultra high (75%) LLC currently (P8Z77 WS). Cpu-Z reads 1.240v on idle and about 1.232v on full load. Is that too high?
I'm about 15 hours into Prime95 default blend (latest version) right now. No errors or crashes yet.
Temps maxes out at 77C on the hottest core. This is with a H100 with 2x AP14 on push. Might do a remount tomorrow.
Hopefully I can pass the 24 hour mark. If I do, I will push it to 4.6 with the same settings.

Good luck hitting 4.6 with the same settings. The 4.5 - 4.7 range is where most people seem to be hitting a big voltage wall. I only need around 1.23v to get 4.5, but about 1.28 to get 4.6, and I haven't even bothered to try 4.7.
My Rig
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 3770k P8Z68-V GEN3 MSI GeForce GTX 670 Power Edition G. Skill Ripjaws X 
Hard DriveHard DriveOptical DriveCooling
Corsair Force Series 3 Seagate Barracuda ASUS DVD Burner Corsair H100 
OSMonitorMonitorPower
Microsoft Windows 7 Professional Samsung EX2220 21.5" 1920x1080 Acer 21.5" 1920x1080 Corsair HX750 
Case
NZXT Tempest 410 Elite 
  hide details  
Reply
My Rig
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 3770k P8Z68-V GEN3 MSI GeForce GTX 670 Power Edition G. Skill Ripjaws X 
Hard DriveHard DriveOptical DriveCooling
Corsair Force Series 3 Seagate Barracuda ASUS DVD Burner Corsair H100 
OSMonitorMonitorPower
Microsoft Windows 7 Professional Samsung EX2220 21.5" 1920x1080 Acer 21.5" 1920x1080 Corsair HX750 
Case
NZXT Tempest 410 Elite 
  hide details  
Reply
post #480 of 3312
Quote:
Originally Posted by Nihilo View Post

Just curious, are you doing offset or manual?

I am doing manual. CPU-Z shows my CoreV as 1.200 as idle and 1.232 full load.
Edited by Gauntlet3h - 5/17/12 at 11:03am
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
  • [Official] The Ivy Bridge Stable / Suicide Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET
Overclock.net › Forums › Intel › Intel CPUs › [Official] The Ivy Bridge Stable / Suicide Club **Guides, Voltages, Temps & BIOS Templates** Inc SPREADSHEET