Hi all.
I have a question to ask regarding the quad sli set up of dual
evga geforce gtx690 cards that I have installed into my case. I have posted in the watercooling thread already in order to place an order for a custom vram waterblock, from nateman_doo (US). It is for an
asrock x79extreme11 motherboard. After I install all the various hardware components into my
cooler master cosmos ii ultra tower, I will need to take a baseline sample of the system running a
cooler master x6 cpu cooler on an
i7-3960x chip and everything else air cooled. Because of the x6, I am unable to install all of the
g.skills 64GB(8GBx8) DDR3 DIMM modules; I can only install 32GB of memory ie 4 sticks into the primary bank of quad channel memory. The secondary bank of quad channel memory is obstructed by the fan on the outside of the x6 cpu cooler.
I am awaiting parts ordered from
Aqua Computer,
Germany, for a fully customised, water cooling loop system that utilises an external cooling tower; full copper water blocks for both gtx690 cards; full copper hdd coolers; silver/copper cpu cooler; full copper custom vram waterblock - finished with mil. spec. silver or palladium plating... and that is only my initial order from them. Not to mention all the fittings.
This is where I seek any help whatever from any of you guys, as to how I can make the most out of an entirely water cooled gaming rig that is also my first time build.
Click to view full size!
I will try to post pictures once parts arrive from Germany - so about the beginning of November, 2012. Any advice is appreciated and welcomed about what sort of temperatures I should be aiming at in the water cooled edition of my pc build.
Cheers,
Brett.
