I'm a proud owner of a 932. I love my case. It's made very well for water cooling with a Radiator up to 240mm in length. Yeah I got a 360 in mine and it fit quite well. However there isn't a lot of room in the 5.25 bay to work in when your port side is up front instead of at the rear.
So maybe we could get another rendition of a HAF 932 with these specifications in mind.
Cube or Double Wide setup. Allowing greater work room for installing important Water Cooling gear, hiding the PSU behind the Mainboard tray at midpoint in the back of the case with a removable rack for Modular setups as well as the ability to put a 3x Radiator in the top and the bottom in the case. True removable drive Racks using your existing tech from the 912 with the lower portion of the 3.25 HDD rack to allow for it to be mounted to the bottom of a partially removable 5.25 rack in order to allow front Radiator access or a spot for Pump/Reservoir combinations like mine.
I'm working toward building a Triple but it's taking me a bit longer than I like since funds aren't liquid enough to do these things without a sponsor. But having owned my 932 for a couple years now and being an active member of the HAF club here on OCN since I got mine, I can honestly say that the ranks of our club probably would not have dwindled so if Cooler Master had launched at least a double wide case with some of these features. I changed the LEDs' out on mine(would be awesome to see a replaceable set of LED built into the I/O panel for whichever color you prefer) because I thought the Blue LED were too brite and didn't fit the color scheme of my build. I leave the ones on my mainboard alone because they're embedded. If I could I would swap those out for Red as well.
Don't mind the tape on the tubing that's to keep the tubing clean from the EK Comps.
~Ceadder
Edited by Ceadderman - 5/3/12 at 2:16pm
So maybe we could get another rendition of a HAF 932 with these specifications in mind.
Cube or Double Wide setup. Allowing greater work room for installing important Water Cooling gear, hiding the PSU behind the Mainboard tray at midpoint in the back of the case with a removable rack for Modular setups as well as the ability to put a 3x Radiator in the top and the bottom in the case. True removable drive Racks using your existing tech from the 912 with the lower portion of the 3.25 HDD rack to allow for it to be mounted to the bottom of a partially removable 5.25 rack in order to allow front Radiator access or a spot for Pump/Reservoir combinations like mine.
I'm working toward building a Triple but it's taking me a bit longer than I like since funds aren't liquid enough to do these things without a sponsor. But having owned my 932 for a couple years now and being an active member of the HAF club here on OCN since I got mine, I can honestly say that the ranks of our club probably would not have dwindled so if Cooler Master had launched at least a double wide case with some of these features. I changed the LEDs' out on mine(would be awesome to see a replaceable set of LED built into the I/O panel for whichever color you prefer) because I thought the Blue LED were too brite and didn't fit the color scheme of my build. I leave the ones on my mainboard alone because they're embedded. If I could I would swap those out for Red as well.
Don't mind the tape on the tubing that's to keep the tubing clean from the EK Comps.
~Ceadder
Edited by Ceadderman - 5/3/12 at 2:16pm
