Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Build Logs › A Switch 810 Build Log "White Lightning"
New Posts  All Forums:Forum Nav:

A Switch 810 Build Log "White Lightning" - Page 2

post #11 of 12
Thread Starter 
UPS stopped by today
448

new psu! the box was a little worn and i was a little worried newegg was sending me someones power supply they didn't want.
448
448

opened it up and everything looked fine though
448[/URL
shes in!
448
some cable management i'll probably leave it like this til I open it back up again and surprisingly theres no bulge even with the back panel on and a mess of wires in the back.448

700




took her outside for some pictures, my biggest complaint with this case is the color matching from the steel panel window and the white plastic, you can clearly see two different shades in my picture frown.gif it still looks great though.
700
post #12 of 12
Thread Starter 
448I wanted to use the drive bay angled fan bracket and see if i could make use of it in the top 5.25 drive bay area.

Why? Because I am planning on making a false floor type mod and the fan would have no use, also my cpu was needing some fresh air.

theres a lot of hardware that needed to come out though, the hot swap bay, the hot swap bay dock that the hd sits on.

also inside the drive bay there are two black washer/o ring type fittings that keep the fan from vibrating make sure you don't use them if you want to use it again in the standard way.

448
448

I used the screws that were in the drive bay, you need a somewhat long screw with the right size that will fit through where the hot swap sata connectors were

448

448



this nzxt fan controller killed my fan too as you'll see in a second

I was having a PITA trying to find a good spot to keep this thing, i don't want it mounted in my pci brackets and i couldn't get it to stay anywhere in the back side of my case without making the leds not stick to the top of the case. ( I had ****ty scotch tape invisible mounts because I lost my 3m ones that were included)

448

I must of pulled on the leds which are mounted across the top

448

took a fin right off my prolimatech 140 vortex, a really great fan btw (about 65cfm), luckily i had another but i was angry because I swear I tried to put the controller for the leds EVERYWHERE and i found a good spot and it killed a fan.

my hand screw cup.. I saw the avengers with my girlfriend and little brother (hes 8 im 20) and she bought us cups for our favorite characters.. i ended up using it to put all my spare screws nuts etc which is very handy having screws from 3 or so cases and two motherboards it seems like i got a little of everything in there.

448



Whats coming
500

and I'm gonna either buy sleeved extensions (thinking about getting mod/smart black/aqua blue
also a custom floor that will cover the bottom psu area!
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Build Logs
Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Build Logs › A Switch 810 Build Log "White Lightning"