NZXT switch 810
Benq 24 inches. 120mhz gaming monitor.
crosair ax 1200 custom self made full single sleeve
rampage iv extream
I7 3930K. with xspc raystorm cpu block
team group 16gb 2133 ram 9-11-11-28 timing @1.5V
2 x saphire OC dual x with swiftech komodo water block.
corsair force GT 180GB SSD.
GTX 360 n GTX 240 top & button, and 120 swiftech qp in the rear all with gentel typoon Ap15 with a fan control.
i dunno how to post pictures here.
but i ran into some problems while installing new windows 7 ultimate.
i checked all the water lining n everything r ok.
so as soon as i turn on my computer, i went into the bios, i turn off all the things that i am not using, than suddenly the monitor just went off, it said's detects no signal, but the fans n everything it's still running, mobo still running.
the led light of the right side where 24 pin on mobo told it's VGA devce.
so i thought it could be VGA problem.
so i swap out one of the graphic card, n it works out, but after i finish installed windows, n mobo drivers.
i try to install the AMD 12.4 drivers, after the driver i reboot the computer, while rebooting as soon as i c the welcome windows7 image , the monitor just went blank, but it's getting signal....
so i had no idea what's going wrong, than i turn off the computer by the PSU switch, n turning back on, but than after bios loaded up, windows won't boot in, it asked me to inject windows disc to repair , so i did as it asked, n after rebooting, it came back with some code on black screen,
0000027 or something more... .
anyone got any clue, any help will be deeply apreciated.