Overclock.net › Forums › Intel › Intel Motherboards › x58a-ud3r BIOS/CMOS crashed
New Posts  All Forums:Forum Nav:

x58a-ud3r BIOS/CMOS crashed

post #1 of 2
Thread Starter 
When I turn on my computer this morning, it turned on for a few seconds and
turned off again. Then I tried it again and it did the same thing. Then I tried
again and it showed that the check sum of the BIOS/CMOS failed and will recover
using the backup, which success. I load the Optimized Defaults and change only
the sata control mode into AHCI. It wont build. It stuck at the loading the HDD
screen. When I change it to IDE, it will boot until the windows screen and then
crashed since windows wasnt install to IDE. Is it a hardware problems or software
or both?? What can I do, beside reinstall windows to IDE??

I was using the latest BIOS FH.
post #2 of 2
Thread Starter 
Okay I changed the CMOS battery and check the HDD and it still giving me a problem.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › x58a-ud3r BIOS/CMOS crashed