Overclock.net › Forums › Intel › Intel Motherboards › Gigabyte G1. Sniper 5/5M/3/M3 Owners Thread/Club
New Posts  All Forums:Forum Nav:

Gigabyte G1. Sniper 5/5M/3/M3 Owners Thread/Club - Page 112

post #1111 of 1879
Quote:
Originally Posted by BradleyW View Post

Here are my results atm. This is very strange!
4.8Ghz, LLC Extreme, PPL Overvolt Enabled, 62c max temp.

vcore 1.28 = 2 hours stable
vcore 1.35 = 5 seconds stable
vcore 1.37 = 2 seconds stable
vcore 1.4 or higher = 1 second stable.
The chip does not like voltage. This is why I only need 1.19v for 4.5Ghz!
Any other suggestions to help get to 4.8Ghz?
Thank you everyone smile.gif

Wow! Me thinks one of your cores might be causing the problem as it doesn't like voltage. Might be a long shot but do you have another chip to test with?
post #1112 of 1879
Quote:
Originally Posted by Nebulous View Post

Wow! Me thinks one of your cores might be causing the problem as it doesn't like voltage. Might be a long shot but do you have another chip to test with?
No I don't have another chip. I don't think one of the cores is to blame otherwise would I not just see 2 out of 8 workers fail in prime95? I hope your wrong here lol.
Wait? I could go down to 4.5Ghz then try 1.4v to see if the test shuts off. This would tell me if one of the cores hates voltage.
Edited by BradleyW - 3/2/13 at 1:53pm
X79-GCN
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3930K 4.5GHz HT GIGABYTE GA-X79-UP4 AMD R9-290X GEil Evo Potenza DDR3 2400MHz CL10 (4x4GB) 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 120GB EK Supremacy (CPU) NF F12's P/P (360 Rad)  NF A14's (420 Rad)  
CoolingCoolingCoolingCooling
XSPC Chrome Compression Fittings EK RES X3 150 Primochill PremoFlex Advanced LRT Clear 1/2 ID EK-FC (R9 290X) 
CoolingCoolingCoolingOS
EK D5 Vario Top-X  Phobya G-Changer V2 360mm Phobya G-Changer V2 420mm Win 10 x64 Pro 
MonitorKeyboardPowerCase
BenQ XR3501 35" Curved Corsair Vengeance K90 Seasonic X-1250 Gold (v2) Corsair 900D 
MouseAudio
Logitech G400s Senn HD 598 
  hide details  
Reply
X79-GCN
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3930K 4.5GHz HT GIGABYTE GA-X79-UP4 AMD R9-290X GEil Evo Potenza DDR3 2400MHz CL10 (4x4GB) 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 120GB EK Supremacy (CPU) NF F12's P/P (360 Rad)  NF A14's (420 Rad)  
CoolingCoolingCoolingCooling
XSPC Chrome Compression Fittings EK RES X3 150 Primochill PremoFlex Advanced LRT Clear 1/2 ID EK-FC (R9 290X) 
CoolingCoolingCoolingOS
EK D5 Vario Top-X  Phobya G-Changer V2 360mm Phobya G-Changer V2 420mm Win 10 x64 Pro 
MonitorKeyboardPowerCase
BenQ XR3501 35" Curved Corsair Vengeance K90 Seasonic X-1250 Gold (v2) Corsair 900D 
MouseAudio
Logitech G400s Senn HD 598 
  hide details  
Reply
post #1113 of 1879
Hmm, yeah that would do it thumb.gif
post #1114 of 1879
Quote:
Originally Posted by Nebulous View Post

Hmm, yeah that would do it thumb.gif

I will get back to you on that. Right now I am on 4.8Ghz at around 1.3v and I'm 2 hours into prime95 so I will just see how this goes for a while smile.gif
X79-GCN
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3930K 4.5GHz HT GIGABYTE GA-X79-UP4 AMD R9-290X GEil Evo Potenza DDR3 2400MHz CL10 (4x4GB) 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 120GB EK Supremacy (CPU) NF F12's P/P (360 Rad)  NF A14's (420 Rad)  
CoolingCoolingCoolingCooling
XSPC Chrome Compression Fittings EK RES X3 150 Primochill PremoFlex Advanced LRT Clear 1/2 ID EK-FC (R9 290X) 
CoolingCoolingCoolingOS
EK D5 Vario Top-X  Phobya G-Changer V2 360mm Phobya G-Changer V2 420mm Win 10 x64 Pro 
MonitorKeyboardPowerCase
BenQ XR3501 35" Curved Corsair Vengeance K90 Seasonic X-1250 Gold (v2) Corsair 900D 
MouseAudio
Logitech G400s Senn HD 598 
  hide details  
Reply
X79-GCN
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3930K 4.5GHz HT GIGABYTE GA-X79-UP4 AMD R9-290X GEil Evo Potenza DDR3 2400MHz CL10 (4x4GB) 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 120GB EK Supremacy (CPU) NF F12's P/P (360 Rad)  NF A14's (420 Rad)  
CoolingCoolingCoolingCooling
XSPC Chrome Compression Fittings EK RES X3 150 Primochill PremoFlex Advanced LRT Clear 1/2 ID EK-FC (R9 290X) 
CoolingCoolingCoolingOS
EK D5 Vario Top-X  Phobya G-Changer V2 360mm Phobya G-Changer V2 420mm Win 10 x64 Pro 
MonitorKeyboardPowerCase
BenQ XR3501 35" Curved Corsair Vengeance K90 Seasonic X-1250 Gold (v2) Corsair 900D 
MouseAudio
Logitech G400s Senn HD 598 
  hide details  
Reply
post #1115 of 1879
Keeping fingers crossed! thumb.gif
post #1116 of 1879
Quote:
Originally Posted by Nebulous View Post

Keeping fingers crossed! thumb.gif
Just as I read this, the PC shut off.
Let me try using silly voltage at 4.5Ghz to see if I BSOD in seconds.
Edit: Yep, looks like you are right. the CPU hates voltage.
Edited by BradleyW - 3/2/13 at 3:22pm
X79-GCN
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3930K 4.5GHz HT GIGABYTE GA-X79-UP4 AMD R9-290X GEil Evo Potenza DDR3 2400MHz CL10 (4x4GB) 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 120GB EK Supremacy (CPU) NF F12's P/P (360 Rad)  NF A14's (420 Rad)  
CoolingCoolingCoolingCooling
XSPC Chrome Compression Fittings EK RES X3 150 Primochill PremoFlex Advanced LRT Clear 1/2 ID EK-FC (R9 290X) 
CoolingCoolingCoolingOS
EK D5 Vario Top-X  Phobya G-Changer V2 360mm Phobya G-Changer V2 420mm Win 10 x64 Pro 
MonitorKeyboardPowerCase
BenQ XR3501 35" Curved Corsair Vengeance K90 Seasonic X-1250 Gold (v2) Corsair 900D 
MouseAudio
Logitech G400s Senn HD 598 
  hide details  
Reply
X79-GCN
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3930K 4.5GHz HT GIGABYTE GA-X79-UP4 AMD R9-290X GEil Evo Potenza DDR3 2400MHz CL10 (4x4GB) 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 120GB EK Supremacy (CPU) NF F12's P/P (360 Rad)  NF A14's (420 Rad)  
CoolingCoolingCoolingCooling
XSPC Chrome Compression Fittings EK RES X3 150 Primochill PremoFlex Advanced LRT Clear 1/2 ID EK-FC (R9 290X) 
CoolingCoolingCoolingOS
EK D5 Vario Top-X  Phobya G-Changer V2 360mm Phobya G-Changer V2 420mm Win 10 x64 Pro 
MonitorKeyboardPowerCase
BenQ XR3501 35" Curved Corsair Vengeance K90 Seasonic X-1250 Gold (v2) Corsair 900D 
MouseAudio
Logitech G400s Senn HD 598 
  hide details  
Reply
post #1117 of 1879
Quote:
Originally Posted by BradleyW View Post

Just as I read this, the PC shut off.
Let me try using silly voltage at 4.5Ghz to see if I BSOD in seconds.

Dam! Soo close too!
post #1118 of 1879
Quote:
Originally Posted by Nebulous View Post

Dam! Soo close too!

OK, anything over 1.32 vcore and the system bluescreens. Looks like i have lost the silicon lottery big time ffs. I wasted my time and money on delidding......
BTW, my monitor is plugged into the onboard graphics. does this reduce overclockability and/or over volting potential?
X79-GCN
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3930K 4.5GHz HT GIGABYTE GA-X79-UP4 AMD R9-290X GEil Evo Potenza DDR3 2400MHz CL10 (4x4GB) 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 120GB EK Supremacy (CPU) NF F12's P/P (360 Rad)  NF A14's (420 Rad)  
CoolingCoolingCoolingCooling
XSPC Chrome Compression Fittings EK RES X3 150 Primochill PremoFlex Advanced LRT Clear 1/2 ID EK-FC (R9 290X) 
CoolingCoolingCoolingOS
EK D5 Vario Top-X  Phobya G-Changer V2 360mm Phobya G-Changer V2 420mm Win 10 x64 Pro 
MonitorKeyboardPowerCase
BenQ XR3501 35" Curved Corsair Vengeance K90 Seasonic X-1250 Gold (v2) Corsair 900D 
MouseAudio
Logitech G400s Senn HD 598 
  hide details  
Reply
X79-GCN
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3930K 4.5GHz HT GIGABYTE GA-X79-UP4 AMD R9-290X GEil Evo Potenza DDR3 2400MHz CL10 (4x4GB) 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 120GB EK Supremacy (CPU) NF F12's P/P (360 Rad)  NF A14's (420 Rad)  
CoolingCoolingCoolingCooling
XSPC Chrome Compression Fittings EK RES X3 150 Primochill PremoFlex Advanced LRT Clear 1/2 ID EK-FC (R9 290X) 
CoolingCoolingCoolingOS
EK D5 Vario Top-X  Phobya G-Changer V2 360mm Phobya G-Changer V2 420mm Win 10 x64 Pro 
MonitorKeyboardPowerCase
BenQ XR3501 35" Curved Corsair Vengeance K90 Seasonic X-1250 Gold (v2) Corsair 900D 
MouseAudio
Logitech G400s Senn HD 598 
  hide details  
Reply
post #1119 of 1879
Quote:
Originally Posted by BradleyW View Post

Just as I read this, the PC shut off.
Let me try using silly voltage at 4.5Ghz to see if I BSOD in seconds.
Edit: Yep, looks like you are right. the CPU hates voltage.
Maybe the chip is not seated against the heatsink properly. The additional voltage could be overheating part of it.
post #1120 of 1879
Quote:
Originally Posted by Art Vanelay View Post

Maybe the chip is not seated against the heatsink properly. The additional voltage could be overheating part of it.
realtemp reports low temps on all cores.
X79-GCN
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3930K 4.5GHz HT GIGABYTE GA-X79-UP4 AMD R9-290X GEil Evo Potenza DDR3 2400MHz CL10 (4x4GB) 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 120GB EK Supremacy (CPU) NF F12's P/P (360 Rad)  NF A14's (420 Rad)  
CoolingCoolingCoolingCooling
XSPC Chrome Compression Fittings EK RES X3 150 Primochill PremoFlex Advanced LRT Clear 1/2 ID EK-FC (R9 290X) 
CoolingCoolingCoolingOS
EK D5 Vario Top-X  Phobya G-Changer V2 360mm Phobya G-Changer V2 420mm Win 10 x64 Pro 
MonitorKeyboardPowerCase
BenQ XR3501 35" Curved Corsair Vengeance K90 Seasonic X-1250 Gold (v2) Corsair 900D 
MouseAudio
Logitech G400s Senn HD 598 
  hide details  
Reply
X79-GCN
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3930K 4.5GHz HT GIGABYTE GA-X79-UP4 AMD R9-290X GEil Evo Potenza DDR3 2400MHz CL10 (4x4GB) 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 120GB EK Supremacy (CPU) NF F12's P/P (360 Rad)  NF A14's (420 Rad)  
CoolingCoolingCoolingCooling
XSPC Chrome Compression Fittings EK RES X3 150 Primochill PremoFlex Advanced LRT Clear 1/2 ID EK-FC (R9 290X) 
CoolingCoolingCoolingOS
EK D5 Vario Top-X  Phobya G-Changer V2 360mm Phobya G-Changer V2 420mm Win 10 x64 Pro 
MonitorKeyboardPowerCase
BenQ XR3501 35" Curved Corsair Vengeance K90 Seasonic X-1250 Gold (v2) Corsair 900D 
MouseAudio
Logitech G400s Senn HD 598 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › Gigabyte G1. Sniper 5/5M/3/M3 Owners Thread/Club