Overclock.net › Forums › Intel › Intel Motherboards › Gigabyte G1. Sniper 5/5M/3/M3 Owners Thread/Club
New Posts  All Forums:Forum Nav:

Gigabyte G1. Sniper 5/5M/3/M3 Owners Thread/Club - Page 133

post #1321 of 1879
Quote:
Originally Posted by jekel View Post

Hi guys,

Could anyone please give me some ideas to fix below:

My system is made up of a 3570k, Gigabyte Sniper 3 and 16gig Corsair Vengeance and below.

[AX850]-[H100]-[2xGB GTX 580]-[OCZ 120gb max iops ssd]-[2xWD 2TB Black]-[Pioneer DVD burner]-[Samsung Blu Ray Combo]-[Corsair 600T White]-[Logitech Dinovo Edge]-[G700]

I put it all together and installed windows/drivers fine at stock settings. I then started overclocking. Got upto 4.6ghz no probs with cpu volatage on 1.2 and llc set to extreme, memory voltage on 1.5. All other settings stock. It was priming no problems and max temp according to real temp was about 67.

I then upped the multiplier to get to 4.7 and 1 core was failing on prime so went back to 4.6 which I was happy with. Next step just wanted to see how low I could get the voltage. 1.15 wouldn't boot into windows, 1.18 was also no good and then 1.19 system restarted and was stuck for 5 minutes at the but boot logo.

Then the pc kept trying to turn itself on but goes back off after about 3 seconds. The motherboard will not even stay on long enough to give an error code. I have take out each part one by one and re inserted ram etc etc. I have even tried motherboard alone on a test bench and I can see it just keeps turning on and off. I have tried using the bios switch for the back up and same thing happens. I then tried pulling out the cmos battery for 30 minutes and even pressing cmos resent.

I know it is not my other gear and I went back and tested my psu with the paperclip trick and also checked if it would power my old Asus R3E. Really annoyed and am set to request warranty. The Sniper 3 was running the latest F7 official bios.

I would be super grateful if anyone had any ideas? thumb.gif

Just thought I'd give an update after a few weeks going back and forth with the pc shop and testing all my parts. The board was fine but the cpu was dead, really weird considering I was not using huge volts or any crazy overclock. Got given a new cpu through warranty but no time to test till end of the week. Fingers crossed all will be fine now.
post #1322 of 1879
Quote:
Originally Posted by Art Vanelay View Post

All 1155 sockets should look the same.

Hey Thanks alot!!! I checked out my Pins & they seem fine but my Hd4000 onboard Chip must be Bad or something cause when Install hd4000 everything Turns Red & Screen Tears & stuff mad.gif
I have to Ask when I updated Bios to F7 G1 Sniper 3 the baseClock is Reading Under 100mhz is that Fine??
post #1323 of 1879
Quote:
Originally Posted by NightHawk06 View Post

Hey Thanks alot!!! I checked out my Pins & they seem fine but my Hd4000 onboard Chip must be Bad or something cause when Install hd4000 everything Turns Red & Screen Tears & stuff mad.gif
I have to Ask when I updated Bios to F7 G1 Sniper 3 the baseClock is Reading Under 100mhz is that Fine??

Yes this seems to be normal on these boards.
To combat this a lot of people set the clock @ 100.33
post #1324 of 1879
Quote:
Originally Posted by NightHawk06 View Post

Hey Thanks alot!!! I checked out my Pins & they seem fine but my Hd4000 onboard Chip must be Bad or something cause when Install hd4000 everything Turns Red & Screen Tears & stuff mad.gif
I have to Ask when I updated Bios to F7 G1 Sniper 3 the baseClock is Reading Under 100mhz is that Fine??
the base clock reading is always low. It might be spread spectrum. I've never tried looking for that setting.

You sound like you might have a defective video cable.
post #1325 of 1879
Quote:
Originally Posted by DrAcK View Post

Yes this seems to be normal on these boards.
To combat this a lot of people set the clock @ 100.33

Thanks, good tip. Mine was low to, set it at 100.33. Finally got my pc back together and works perfect, it was a dud cpu yay. New one is happily prime stable at 4.4ghz 1.1vcore........temps hover around 55 at load. Gets bsod at 4.5ghz at 1.1v but I don't want to use more as happy with current temps/speed.
post #1326 of 1879
Hi

I'm new in the site, I just wanted to join to the G1 Sniper 3 owners club, I have two weeks with my new build gamer pc, here is the configuration:


-Corei5 3570k OC 4.2Ghz
-Cooler Master V6GT
-Gigabyte G1.Sniper 3
-Ram Kingston HyperX Blu 16GB 1600Mhz
-HD SSD Samsung 840 250gb
-HD Seagate Barracuda 2TB 64MB Cache
-LG Bluray Burner BR/DVD/CD
-PSU Cooler Master 850w 66A Silent Pro Modular
-Video Card Gigabyte GTX 680 OC 4GB
-Case Cooler Master 690 II Advance
-Microsoft Slidewinder mouse (prox rat 7 or mmo7)
-Microsoft Confort Curve keyboard.

Thanks.
post #1327 of 1879
Quote:
Originally Posted by DrAcK View Post

Yes this seems to be normal on these boards.
To combat this a lot of people set the clock @ 100.33

Thanks alot set it to 100.33 & its reading 100 now thumb.gif I also have to Ask on my Motherboard G1 Sniper 3 it showing Code on mobo 03 I looked it up on Manual book & doesnt have that Code number in book anybody know what Code this is??
post #1328 of 1879
Everytime I install my titan I am stuck on the post screen and cant do anything. Anyone have any ideas? Thanks
THE BEAST 2.0
(35 items)
 
TheBeast
(19 items)
 
CPUMotherboardGraphicsGraphics
3770K G1 Sniper 3 EVGA GtX Titan SC EVGA GtX Titan SC 
RAMHard DriveHard DriveOptical Drive
G.Skill Ripjaws X Series 16GB  Samsung 840 Pro Series 128GB 2.5" SSD Samsung 840 Pro Series 128GB 2.5" SSD DVD 
CoolingOSMonitorMonitor
Ray Storm CPU Block Windows 8 Asus VG278HE Asus VG278HE 
MonitorKeyboardPowerCase
Asus VG278HE Corsair K90 Cooler Master 1200W Corsair Obsidian 900D 
MouseMouse PadAudioOther
Naga  Razer Vespula Corsair SP2500 480 EK Radiator  
OtherOtherOtherOther
360 Black Ice GT Radiator 240 EK Radiator Swiftech MCP35B EK-FC GeForce GTX Titan SE Water block 
OtherOtherOtherOther
EK-FC GeForce GTX Titan SE Water block Primo Flex Tubing / MISC Fittings / cables / qu... XSPC Reservoir Swiftech MCP35B 
OtherOtherOtherOther
240 EK Radiator XSPC Premium Laing Dual DDC Clear Acrylic Top EK-TITAN-SE-BACKPLATE  EK-TITAN-SE-BACKPLATE 
OtherOtherOther
Monsoon Compression Fittings Raystorm water block XSPC Memory Block 
CPUMotherboardGraphicsGraphics
I7 920 Asus Rampage 3 Extreme Geforce 470 Geforce 470 
GraphicsGraphicsRAMHard Drive
Geforce 470 Geforce 550TI Corsair dominator 1600 Samsung 830 
Hard DriveOptical DriveCoolingOS
Raptor Blue-Ray Heat Killer water block CPU and Koolance blocks... Windows 7  
MonitorKeyboardPowerCase
3 ASUS VG278HE Corsair Vengeance K90 BFG 1200  Corsair Obsidian 800D 
MouseMouse PadAudio
Naga Razer Ironclad Elite Hard Gaming Mouse Mat Sound Blaster XFI Fatality  
  hide details  
Reply
THE BEAST 2.0
(35 items)
 
TheBeast
(19 items)
 
CPUMotherboardGraphicsGraphics
3770K G1 Sniper 3 EVGA GtX Titan SC EVGA GtX Titan SC 
RAMHard DriveHard DriveOptical Drive
G.Skill Ripjaws X Series 16GB  Samsung 840 Pro Series 128GB 2.5" SSD Samsung 840 Pro Series 128GB 2.5" SSD DVD 
CoolingOSMonitorMonitor
Ray Storm CPU Block Windows 8 Asus VG278HE Asus VG278HE 
MonitorKeyboardPowerCase
Asus VG278HE Corsair K90 Cooler Master 1200W Corsair Obsidian 900D 
MouseMouse PadAudioOther
Naga  Razer Vespula Corsair SP2500 480 EK Radiator  
OtherOtherOtherOther
360 Black Ice GT Radiator 240 EK Radiator Swiftech MCP35B EK-FC GeForce GTX Titan SE Water block 
OtherOtherOtherOther
EK-FC GeForce GTX Titan SE Water block Primo Flex Tubing / MISC Fittings / cables / qu... XSPC Reservoir Swiftech MCP35B 
OtherOtherOtherOther
240 EK Radiator XSPC Premium Laing Dual DDC Clear Acrylic Top EK-TITAN-SE-BACKPLATE  EK-TITAN-SE-BACKPLATE 
OtherOtherOther
Monsoon Compression Fittings Raystorm water block XSPC Memory Block 
CPUMotherboardGraphicsGraphics
I7 920 Asus Rampage 3 Extreme Geforce 470 Geforce 470 
GraphicsGraphicsRAMHard Drive
Geforce 470 Geforce 550TI Corsair dominator 1600 Samsung 830 
Hard DriveOptical DriveCoolingOS
Raptor Blue-Ray Heat Killer water block CPU and Koolance blocks... Windows 7  
MonitorKeyboardPowerCase
3 ASUS VG278HE Corsair Vengeance K90 BFG 1200  Corsair Obsidian 800D 
MouseMouse PadAudio
Naga Razer Ironclad Elite Hard Gaming Mouse Mat Sound Blaster XFI Fatality  
  hide details  
Reply
post #1329 of 1879
I own G1.Sniper M3 and overall I'm very happy with it, however I have a problem with THX TruStudio Pro software. In short - it does not apply settings at boot until I deactivate and reactivate it using the tray icon. To be precise - after Windows boots to desktop, I have to click the tray icon to open Sound Blaster control panel application, then click THX TruStudio Pro button to disable THX TruStudio Pro and then click it again to enable it. Only then settings are applied (I can clearly hear the difference).

Does anyone have similar problem? It's annoying...
post #1330 of 1879
Quote:
Originally Posted by NightHawk06 View Post

Thanks alot set it to 100.33 & its reading 100 now thumb.gif I also have to Ask on my Motherboard G1 Sniper 3 it showing Code on mobo 03 I looked it up on Manual book & doesnt have that Code number in book anybody know what Code this is??

When my comp is up and running, this is the code that always appears.

Also since it is not in the book:
I can only assume that this means that there are no problems with the Motherboard, or its peripherals & it is running smoothly.
Ev3rGr3en V.2.0
(28 items)
 
[Build Log] EV3GR3EN
(143 photos)
 
CPUMotherboardGraphicsGraphics
i7 6700k Asus ROG Maximus VIII Formula EVGA 06G-P4-4992-KR GeForce GTX 980 Ti SC (NV D... EVGA 06G-P4-4995-KR GeForce GTX 980 Ti SC+ w/AC... 
RAMHard DriveHard DriveHard Drive
G.SKILL Ripjaws V Series Boot: SAMSUNG 840 EVO  Primary Storage: 6.82TB WD15EARX in Raid 0 Secondary Storage: 2TB Seagate Barracuda 
Hard DriveCoolingCoolingCooling
External Backup: 3TB Western Digital + Thermalt... 9x BitFenix Spectre Pro 140mm Fans Swiftech Apogee XL  XSPC 420mm Radiator 
CoolingCoolingCoolingCooling
Bitspower 250ml Reservoir All Bitspower Fittings Swiftech Tapped MCP-655 Pump Bitspower 16mm Hardline 
OSMonitorMonitorMonitor
Windows 10 Center Display: Asus VN247H-P, Left & Right Dis... 1x Vizio M3D550SL 55" 3D TV + Rosewill RHTB-110... 1x Acer G235H 
KeyboardPowerCaseMouse
Corsair K70 Vegeance RGB Corsair HX850 Aerocool Strike-X ST MadCatz Gloss White M.M.O 7 
Mouse PadAudioOtherOther
2x Xtrac Ripper XXL Pads + 4x Razer Goliathus  Logitech G930 Razer Orbweaver CyberPower Intelligent LCD Series GreenPower UP... 
GraphicsGraphicsMonitorMonitor
EVGA 04G-P4-3777-KR GeForce GTX 770 Classified ... EVGA 04G-P4-3777-KR GeForce GTX 770 Classified ... ASUS VN247H-P Black 23.6" 1ms (GTG) HDMI Widesc... ASUS VN247H-P Black 23.6" 1ms (GTG) HDMI Widesc... 
CaseOther
CaseLabs Shipping 
  hide details  
Reply
Ev3rGr3en V.2.0
(28 items)
 
[Build Log] EV3GR3EN
(143 photos)
 
CPUMotherboardGraphicsGraphics
i7 6700k Asus ROG Maximus VIII Formula EVGA 06G-P4-4992-KR GeForce GTX 980 Ti SC (NV D... EVGA 06G-P4-4995-KR GeForce GTX 980 Ti SC+ w/AC... 
RAMHard DriveHard DriveHard Drive
G.SKILL Ripjaws V Series Boot: SAMSUNG 840 EVO  Primary Storage: 6.82TB WD15EARX in Raid 0 Secondary Storage: 2TB Seagate Barracuda 
Hard DriveCoolingCoolingCooling
External Backup: 3TB Western Digital + Thermalt... 9x BitFenix Spectre Pro 140mm Fans Swiftech Apogee XL  XSPC 420mm Radiator 
CoolingCoolingCoolingCooling
Bitspower 250ml Reservoir All Bitspower Fittings Swiftech Tapped MCP-655 Pump Bitspower 16mm Hardline 
OSMonitorMonitorMonitor
Windows 10 Center Display: Asus VN247H-P, Left & Right Dis... 1x Vizio M3D550SL 55" 3D TV + Rosewill RHTB-110... 1x Acer G235H 
KeyboardPowerCaseMouse
Corsair K70 Vegeance RGB Corsair HX850 Aerocool Strike-X ST MadCatz Gloss White M.M.O 7 
Mouse PadAudioOtherOther
2x Xtrac Ripper XXL Pads + 4x Razer Goliathus  Logitech G930 Razer Orbweaver CyberPower Intelligent LCD Series GreenPower UP... 
GraphicsGraphicsMonitorMonitor
EVGA 04G-P4-3777-KR GeForce GTX 770 Classified ... EVGA 04G-P4-3777-KR GeForce GTX 770 Classified ... ASUS VN247H-P Black 23.6" 1ms (GTG) HDMI Widesc... ASUS VN247H-P Black 23.6" 1ms (GTG) HDMI Widesc... 
CaseOther
CaseLabs Shipping 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › Gigabyte G1. Sniper 5/5M/3/M3 Owners Thread/Club