Sin would it be possible for you to send me a profile for 4.7 ghz and 4.8 ghz using DVID? Remenber I am suing ths samsung green (1600) oc to 2133. Thanks! Preferabaly using this template.
Warning: Spoiler! (Click to show)
Edited by Conners - 6/27/12 at 4:47pm
Warning: Spoiler! (Click to show)
CPU = Model # Intel 3770K
Motherboard = G1.Sniper3, Revision 1.0
BIOS Version = F6a
Ram = Samsung Green 8GB 2x4GB MV-3V4G3D/US Dual Channel DDR3
MIT Current Status..................................[ENTER]
Advanced Freqency Settings..........................[ENTER]
CPU/PCIe Base Clock................100.00MHz........[AUTO]
Processor Graphics Clock...........1150.............[Auto]
CPU Clock Ratio....................35...............[45]
CPU Frequency......................3.5GHz...........4.50GHz
Advanced CPU Core Features..........................[ENTER]
Intel(R) Turbo Boost Technology.....................[Disabled]
Turbo Ratio (1-Core Active.......39...............[AUTO]
Turbo Ratio (2-Core Active.......39...............[AUTO]
Turbo Ratio (3-Core Active.......38...............[AUTO]
Turbo Ratio (4-Core Active.......37...............[AUTO]
Turbo Power Limit (WATTS)..........77...............[300]
Core Current Limit (AMPS)..........112..............[200]
CPU Core Enable....................4................[AUTO]
Hyper-Threading Technology..........................[Enable]
CPU Enhanced Halt(C1E)..............................[Enable]
C3/C6 State Support.................................[EnaBLE]
CPU Thermal Monitor.................................[AUTO]
CPU EIST Function...................................[eNABLE]
System Memory Multiplier..........[16]..............[21.33]
Memory Frequency..................1600MHz...........2133MHZ
Advanced Memory Settings............................[ENTER]
Performance Enhanced................................[Turbo]
Dram Timing Slectable...............................[Quick]
Profile DDR Voltage...............1.50V.............[1.50V]
Profile VTT Voltage...............1.05V.............[1.05V]
Channel Interleaving................................[AUTO]
Rank Interleaving...................................[AUTO]
[ENTER] Channel A Timing Settings
Channel A Standard Timing Control
CAS Latency.......................11................[10]
tRCD..............................11................[10]
tRP...............................11................[10]
tRAS..............................28................[28]
Standard A Advanced Timing Control
tRC...............................39................[AUTO]
tRRD..............................5.................[AUTO]
tWTR..............................6.................[AUTO]
tWR...............................12................[AUTO]
tWTP..............................24................[AUTO]
tWL...............................8.................[AUTO]
tRFC..............................128...............[AUTO]
tRTP..............................6.................[AUTO]
tFAW..............................24................[AUTO]
Command Rate(tCMD)................1.................[1]
tRW Stability Level...............3.................[AUTO]
TWR Stability Level...............3.................[AUTO]
[ENTER] Channel B Timing Settings
Channel B Standard Timing Control
CAS Latency.......................11................[10]
tRCD..............................11................[10]
tRP...............................11................[10]
tRAS..............................28................[28]
Standard B Advanced Timing Control
tRC...............................39................[AUTO]
tRRD..............................5.................[AUTO]
tWTR..............................6.................[AUTO]
tWR...............................12................[AUTO]
tWTP..............................24................[AUTO]
tLW...............................8.................[AUTO]
tRFC..............................128...............[AUTO]
tRTP..............................6.................[AUTO]
tFAW..............................24................[AUTO]
Command Rate(tCMD)................1.................[1]
tRW Stability Level...............3.................[AUTO]
TWR Stability Level...............3.................[AUTO]
Advanced Voltage Settings...........................[ENTER]
3D Power Control....................................[ENTER]
PM Phase ConTrol....................................[eXm Perf]
Vcore Voltage Response..............................[Fast]
Vcore Loadline Calibration..........................[HIGH]
GFX Voltage Loadline Calibration....................[AUTO]
DDR CH(A/B) Voltage Loadline Calibration............[AUTO]
CPU Vtt Loadline Claibration........................[AUTO]
Vcore Protection...................250.0mV..........[AUTO]
DDR CH(A/B) Voltage Protection.....250.0mV..........[AUTO]
Vcore Current Protection............................[AUTO]
CPU Vtt Current Protection..........................[AUTO]
GFX Current Protection..............................[AUTO]
DDR CN(A/B) Current Protection......................[AUTO]
Vcore Protection...................250.0mV..........[AUTO]
DDR CH(A/B) Voltage Protection.....250.0mV..........[AUTO]
Vcore Current Protection............................[AUTO]
CPU Vtt Current Protection..........................[AUTO]
GFX Current Protection..............................[AUTO]
DDR CH(A/B) Current Protection......................[AUTO]
Vcore PWM THermal Protection.......130.0°C..........[AUTO]
DDR CH(A/B) PWM Thermal Protection.130.0°C..........[AUTO]
CPU PWM Switch Rate................500.0KHz.........[AUTO]
GFX PWM Switch Rate................250.0KHz.........[AUTO]
CPU Vtt PWM Switch Rate............250.0KHz.........[AUTO]
DDR CH(A/B) PWM Switch Rate........250.0KHz.........[AUTO]
CPU Core Voltage Control
CPU Vcore..........................1.195V............[Normal]
DYnamic V core(DVID)...............+0.00v............[+0.005V]
CPU Vtt............................1.050.............[Auto]
CPU PLL............................1.800V............[1.800]
IMC................................0.925V............[AUTO]
Dynamic GFX Core(VAXG DVID)........+0.000V...........[AUTO]
DRAM Voltage Control
DRAM VOltage......(CH A/B).........1.500V............[1.550V]
DRAm Termination..(CH A/B).........0.750V............[AUTO]
Data Reference....(CH A)...........0.750V............[Auto]
Address Reference.(CH A)...........0.750V............[AUTO]
Data Reference....(CH B)...........0.750V............[AUTO]
Address Reference.(CH B)...........0.750V............[AUTO]
Motherboard = G1.Sniper3, Revision 1.0
BIOS Version = F6a
Ram = Samsung Green 8GB 2x4GB MV-3V4G3D/US Dual Channel DDR3
MIT Current Status..................................[ENTER]
Advanced Freqency Settings..........................[ENTER]
CPU/PCIe Base Clock................100.00MHz........[AUTO]
Processor Graphics Clock...........1150.............[Auto]
CPU Clock Ratio....................35...............[45]
CPU Frequency......................3.5GHz...........4.50GHz
Advanced CPU Core Features..........................[ENTER]
Intel(R) Turbo Boost Technology.....................[Disabled]
Turbo Ratio (1-Core Active.......39...............[AUTO]
Turbo Ratio (2-Core Active.......39...............[AUTO]
Turbo Ratio (3-Core Active.......38...............[AUTO]
Turbo Ratio (4-Core Active.......37...............[AUTO]
Turbo Power Limit (WATTS)..........77...............[300]
Core Current Limit (AMPS)..........112..............[200]
CPU Core Enable....................4................[AUTO]
Hyper-Threading Technology..........................[Enable]
CPU Enhanced Halt(C1E)..............................[Enable]
C3/C6 State Support.................................[EnaBLE]
CPU Thermal Monitor.................................[AUTO]
CPU EIST Function...................................[eNABLE]
System Memory Multiplier..........[16]..............[21.33]
Memory Frequency..................1600MHz...........2133MHZ
Advanced Memory Settings............................[ENTER]
Performance Enhanced................................[Turbo]
Dram Timing Slectable...............................[Quick]
Profile DDR Voltage...............1.50V.............[1.50V]
Profile VTT Voltage...............1.05V.............[1.05V]
Channel Interleaving................................[AUTO]
Rank Interleaving...................................[AUTO]
[ENTER] Channel A Timing Settings
Channel A Standard Timing Control
CAS Latency.......................11................[10]
tRCD..............................11................[10]
tRP...............................11................[10]
tRAS..............................28................[28]
Standard A Advanced Timing Control
tRC...............................39................[AUTO]
tRRD..............................5.................[AUTO]
tWTR..............................6.................[AUTO]
tWR...............................12................[AUTO]
tWTP..............................24................[AUTO]
tWL...............................8.................[AUTO]
tRFC..............................128...............[AUTO]
tRTP..............................6.................[AUTO]
tFAW..............................24................[AUTO]
Command Rate(tCMD)................1.................[1]
tRW Stability Level...............3.................[AUTO]
TWR Stability Level...............3.................[AUTO]
[ENTER] Channel B Timing Settings
Channel B Standard Timing Control
CAS Latency.......................11................[10]
tRCD..............................11................[10]
tRP...............................11................[10]
tRAS..............................28................[28]
Standard B Advanced Timing Control
tRC...............................39................[AUTO]
tRRD..............................5.................[AUTO]
tWTR..............................6.................[AUTO]
tWR...............................12................[AUTO]
tWTP..............................24................[AUTO]
tLW...............................8.................[AUTO]
tRFC..............................128...............[AUTO]
tRTP..............................6.................[AUTO]
tFAW..............................24................[AUTO]
Command Rate(tCMD)................1.................[1]
tRW Stability Level...............3.................[AUTO]
TWR Stability Level...............3.................[AUTO]
Advanced Voltage Settings...........................[ENTER]
3D Power Control....................................[ENTER]
PM Phase ConTrol....................................[eXm Perf]
Vcore Voltage Response..............................[Fast]
Vcore Loadline Calibration..........................[HIGH]
GFX Voltage Loadline Calibration....................[AUTO]
DDR CH(A/B) Voltage Loadline Calibration............[AUTO]
CPU Vtt Loadline Claibration........................[AUTO]
Vcore Protection...................250.0mV..........[AUTO]
DDR CH(A/B) Voltage Protection.....250.0mV..........[AUTO]
Vcore Current Protection............................[AUTO]
CPU Vtt Current Protection..........................[AUTO]
GFX Current Protection..............................[AUTO]
DDR CN(A/B) Current Protection......................[AUTO]
Vcore Protection...................250.0mV..........[AUTO]
DDR CH(A/B) Voltage Protection.....250.0mV..........[AUTO]
Vcore Current Protection............................[AUTO]
CPU Vtt Current Protection..........................[AUTO]
GFX Current Protection..............................[AUTO]
DDR CH(A/B) Current Protection......................[AUTO]
Vcore PWM THermal Protection.......130.0°C..........[AUTO]
DDR CH(A/B) PWM Thermal Protection.130.0°C..........[AUTO]
CPU PWM Switch Rate................500.0KHz.........[AUTO]
GFX PWM Switch Rate................250.0KHz.........[AUTO]
CPU Vtt PWM Switch Rate............250.0KHz.........[AUTO]
DDR CH(A/B) PWM Switch Rate........250.0KHz.........[AUTO]
CPU Core Voltage Control
CPU Vcore..........................1.195V............[Normal]
DYnamic V core(DVID)...............+0.00v............[+0.005V]
CPU Vtt............................1.050.............[Auto]
CPU PLL............................1.800V............[1.800]
IMC................................0.925V............[AUTO]
Dynamic GFX Core(VAXG DVID)........+0.000V...........[AUTO]
DRAM Voltage Control
DRAM VOltage......(CH A/B).........1.500V............[1.550V]
DRAm Termination..(CH A/B).........0.750V............[AUTO]
Data Reference....(CH A)...........0.750V............[Auto]
Address Reference.(CH A)...........0.750V............[AUTO]
Data Reference....(CH B)...........0.750V............[AUTO]
Address Reference.(CH B)...........0.750V............[AUTO]
Edited by Conners - 6/27/12 at 4:47pm
Main Rig
(14 items) |
|
Main Rig
(14 items) |
