Ok heres a completed MIT bios page. Please feel free to make sugestion to what to add or substract. I feel sure ud5 and ud3 users can use it also with slight modifications. Also after some ot the tinings I left those off as noone will change those see note in template. BTW these are my current bios settings... look em over and make settings change sugestions. :thumbsup:
Code:
CPU = Model # Intel 3770K
Motherboard = G1.Sniper3, Revision 1.0
BIOS Version = F6a
Ram = Samsung Green 8GB 2x4GB MV-3V4G3D/US Dual Channel DDR3
MIT Current Status..................................[ENTER]
Advanced Freqency Settings..........................[ENTER]
CPU/PCIe Base Clock................100.00MHz........[AUTO]
Processor Graphics Clock...........1150.............[Auto]
CPU Clock Ratio....................35...............[45]
CPU Frequency......................3.5GHz...........4.50GHz
Advanced CPU Core Features..........................[ENTER]
Intel(R) Turbo Boost Technology.....................[AUTO]
Turbo Ratio (1-Core Active.......39...............[AUTO]
Turbo Ratio (2-Core Active.......39...............[AUTO]
Turbo Ratio (3-Core Active.......38...............[AUTO]
Turbo Ratio (4-Core Active.......37...............[AUTO]
Turbo Power Limit (WATTS)..........77...............[AUTO]
Core Current Limit (AMPS)..........112..............[AUTO]
CPU Core Enable....................4................[AUTO]
Hyper-Threading Technology..........................[AUTO]
CPU Enhanced Halt(C1E)..............................[AUTO]
C3/C6 State Support.................................[AUTO]
CPU Thermal Monitor.................................[AUTO]
CPU EIST Function...................................[Auto]
System Memory Multiplier..........[16]..............[21.33]
Memory Frequency..................1600MHz...........2133MHZ
Advanced Memory Settings............................[ENTER]
Performance Enhanced................................[TURBO]
Dram Timing Slectable...............................[AUTO]
Profile DDR Voltage...............1.50V.............[1.50V]
Profile VTT Voltage...............1.05V.............[1.05V]
Channel Interleaving................................[AUTO]
Rank Interleaving...................................[AUTO]
[ENTER] Channel A Timing Settings
Channel A Standard Timing Control
CAS Latency.......................11................[AUTO]
tRCD..............................11................[AUTO]
tRP...............................11................[AUTO]
tRAS..............................28................[AUTO]
Standard A Advanced Timing Control
tRC...............................39................[AUTO]
tRRD..............................5.................[AUTO]
tWTR..............................6.................[AUTO]
tWR...............................12................[AUTO]
tWTP..............................24................[AUTO]
tWL...............................8.................[AUTO]
tRFC..............................128...............[AUTO]
tRTP..............................6.................[AUTO]
tFAW..............................24................[AUTO]
Command Rate(tCMD)................1.................[AUTO]
tRW Stability Level...............3.................[AUTO]
TWR Stability Level...............3.................[AUTO] <<<-- Left all settings off after this
[ENTER] Channel B Timing Settings
Channel B Standard Timing Control
CAS Latency.......................11................[AUTO]
tRCD..............................11................[AUTO]
tRP...............................11................[AUTO]
tRAS..............................28................[AUTO]
Standard B Advanced Timing Control
tRC...............................39................[AUTO]
tRRD..............................5.................[AUTO]
tWTR..............................6.................[AUTO]
tWR...............................12................[AUTO]
tWTP..............................24................[AUTO]
tLW...............................8.................[AUTO]
tRFC..............................128...............[AUTO]
tRTP..............................6.................[AUTO]
tFAW..............................24................[AUTO]
Command Rate(tCMD)................1.................[AUTO]
tRW Stability Level...............3.................[AUTO]
TWR Stability Level...............3.................[AUTO] <<<-- Left all settings off after this
Advanced Voltage Settings...........................[ENTER]
3D Power Control....................................[ENTER]
PM Phase ConTrol....................................[AUTO]
Vcore Voltage Response..............................[AUTO
Vcore Loadline Calibration..........................[TURBO]
GFX Voltage Loadline Calibration....................[AUTO]
DDR CH(A/B) Voltage Loadline Calibration............[AUTO]
CPU Vtt Loadline Claibration........................[AUTO]
Vcore Protection...................250.0mV..........[AUTO]
DDR CH(A/B) Voltage Protection.....250.0mV..........[AUTO]
Vcore Current Protection............................[AUTO]
CPU Vtt Current Protection..........................[AUTO]
GFX Current Protection..............................[AUTO]
DDR CN(A/B) Current Protection......................[AUTO]
Vcore Protection...................250.0mV..........[AUTO]
DDR CH(A/B) Voltage Protection.....250.0mV..........[AUTO]
Vcore Current Protection............................[AUTO]
CPU Vtt Current Protection..........................[AUTO]
GFX Current Protection..............................[AUTO]
DDR CH(A/B) Current Protection......................[AUTO]
Vcore PWM THermal Protection.......130.0°C..........[AUTO]
DDR CH(A/B) PWM Thermal Protection.130.0°C..........[AUTO]
CPU PWM Switch Rate................500.0KHz.........[AUTO]
GFX PWM Switch Rate................250.0KHz.........[AUTO]
CPU Vtt PWM Switch Rate............250.0KHz.........[AUTO]
DDR CH(A/B) PWM Switch Rate........250.0KHz.........[AUTO]
CPU Core Voltage Control
CPU Vcore..........................1.195V............[AUTO]
DYnamic V core(DVID)...............+0.00v............[+0.010V]<<<-Grayed out
CPU Vtt............................1.050V............[AUTO]
CPU PLL............................1.800V............[AUTO]
IMC................................0.925V............[0.930V]
Dynamic GFX Core(VAXG DVID)........+0.000V...........[AUTO]
DRAM Voltage Control
DRAM VOltage......(CH A/B).........1.500V............[1.550V]
DRAm Termination..(CH A/B).........0.750V............[AUTO]
Data Reference....(CH A)...........0.750V............[Auto]
Address Reference.(CH A)...........0.750V............[AUTO]
Data Reference....(CH B)...........0.750V............[AUTO]
Address Reference.(CH B)...........0.750V............[AUTO]
PC Health Status.....................................[ENTER] <<<- May remove this and below completely
Reset Case Open Status...............................[Disabled]
CPU Warning Temp.....................................[Disabled]
CPU Fan Fail Warning.................................[Enabled]
1st System Fain Fail Warning.........................[Disabled]
2nd System Fain Fail Warning.........................[Disabled]
3rd System Fain Fail Warning.........................[Disabled]
4th System Fain Fail Warning.........................[Disabled]
CPU/3rd Fan Speed Control............................[Normal]
1st/4th System Fan Speed Control.....................[Normal]
2nd System Fan Speed Control.........................[Normal]
.... 
