Quote:
I will go for the kit and make a few modifications to like tubing and that.Originally Posted by Ninja Hedgehog 
Go custom, it's usually cheaper than the kits.
This is what I'd get:
Pump: Swiftech MCP35X
Res: Swiftech MCP35X-RES
This res goes directly on the pump, and can be used separately. The pump is PWM controlled, which is awesome.
If you don't like that, go for a Laing D5 (Swiftech MCP655, Koolance PMP-450, Alphacool D5, they're all pretty much the same) and the XSPC D5 dual 5.25" bay reservoir.

Go custom, it's usually cheaper than the kits.
This is what I'd get:
Pump: Swiftech MCP35X
Res: Swiftech MCP35X-RES
This res goes directly on the pump, and can be used separately. The pump is PWM controlled, which is awesome.
If you don't like that, go for a Laing D5 (Swiftech MCP655, Koolance PMP-450, Alphacool D5, they're all pretty much the same) and the XSPC D5 dual 5.25" bay reservoir.
Quote:
I just calculated total cost of those pumps/res combos and they cost almost the amount a good kit would cost. Quite pricey. I think I'll stick to a kitOriginally Posted by UltraVolta425 
Yes, but I have two remarks on that front:
1) I personally went for a fully customized loop, not a kit (because kits with 360mm rads aren't available in my country, it seems) but if I'd went with a kit, I'd still choose a colored tubing to my liking, since the ones in the kit are crystal clear (read: most likely see-through) so if you want a theme you'll need other tubing, or colored coolant which isn't recommended since the dye always fades after time.
2) The EX360 is 3.55cm high, so it's best to measure - if you'll put it in the top of the case - from top to motherboard if it will fit in there. Even I with my Cosmos II giant case found my match with the H100, size-wise.

Yes, but I have two remarks on that front:
1) I personally went for a fully customized loop, not a kit (because kits with 360mm rads aren't available in my country, it seems) but if I'd went with a kit, I'd still choose a colored tubing to my liking, since the ones in the kit are crystal clear (read: most likely see-through) so if you want a theme you'll need other tubing, or colored coolant which isn't recommended since the dye always fades after time.
2) The EX360 is 3.55cm high, so it's best to measure - if you'll put it in the top of the case - from top to motherboard if it will fit in there. Even I with my Cosmos II giant case found my match with the H100, size-wise.








