Overclock.net › Forums › Case Mods & Cases › Other Hardware Mods › Cables and Sleeving › Frequently Asked Sleeving Questions
New Posts  All Forums:Forum Nav:

Frequently Asked Sleeving Questions - Page 22

post #211 of 1090
I took a look at my Moddiy fan connectors. I noticed how the slots are longer on the 4-pin connectors. I compared the 3-pin to a 3-pin I took off my Fractal Design fan and it's identical.
post #212 of 1090
Quote:
Originally Posted by Furion92 View Post

I don't know anything about the fan connectors, I never found them when I searched.

3 POS: 22-01-3037 (Natural)

4 POS: 47054-1000 (Ivory)

 

I don't know about the other colors and It would be a good idea if someone could double check these.

post #213 of 1090
I would stay away from the pins at the top of the page of the 3 pos connector, they have the little wings you have to cut off (MOLEX 08-55-0101) but get these instead (08-50-0114). This is judging by the pics as I'm not familiar with the part numbers. The first group are joined together by those little wings in the "spring" area of the pin and are a royal pita. I got a bunch of those from FTW PC a while back and I never use them anymore. Or you can just get some from Nils.
post #214 of 1090
Quote:
Originally Posted by mandrix View Post

I would stay away from the pins at the top of the page of the 3 pos connector, they have the little wings you have to cut off (MOLEX 08-55-0101) but get these instead (08-50-0114). This is judging by the pics as I'm not familiar with the part numbers. The first group are joined together by those little wings in the "spring" area of the pin and are a royal pita. I got a bunch of those from FTW PC a while back and I never use them anymore. Or you can just get some from Nils.

It should be noted that 08-50-0114 comes in a bag and 08-50-0113 comes on a reel. The reel is always cheaper, but at the cost of your time.

 

FTW PC has been selling 08-50-0113 since April-May 2012.

post #215 of 1090
Looks like I got lucky. The local Molex dealer has the ATX pins in stock, 0.045$ per pin, is that a good price for a bagged pin? biggrin.gif
Edited by adi518 - 9/11/12 at 1:01am
post #216 of 1090
Quote:
Originally Posted by adi518 View Post

Looks like I got lucky. The local Molex dealer has the ATX pins in stock, 0.045$ per pin, is that a good price for bag pin? biggrin.gif

Part number?

post #217 of 1090
I will buy 100 of them in a bag. They said I can buy as many as I want while stock lasts. biggrin.gif

I gave them these:

Molex ATX (Mini-Fit Jr. Series) Female Pins - 39-00-0038 (Reel)
Molex ATX (Mini-Fit Jr. Series) Female Pins - 39-00-0039 (Bag)
Edited by adi518 - 9/11/12 at 2:10am
post #218 of 1090

Seems like a great price for 39-00-0039, even if you buy 1000. How much does 39-00-0038 cost?

post #219 of 1090
Yes, it's a bargain and it's 15 minutes away. biggrin.gif

The reel pins cost 0.03$ but I was told it's 4000 pins per reel so I can't really buy it, I'm not Nils from MDPC. tongue.gif

Very small difference compare to 'bag' and it'll save me some labor time anyway.
Edited by adi518 - 9/11/12 at 2:11am
post #220 of 1090
Thread Starter 
Quote:
Originally Posted by adi518 View Post

Yes, it's a bargain and it's 15 minutes away. biggrin.gif
The reel pins cost 0.03$ but I was told it's 4000 pins per reel so I can't really buy it, I'm not Nils from MDPC. tongue.gif
Very small difference compare to 'bag' and it'll save me some labor time anyway.

Haha, trust me a whole reel lasts a long time. =P
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Cables and Sleeving
Overclock.net › Forums › Case Mods & Cases › Other Hardware Mods › Cables and Sleeving › Frequently Asked Sleeving Questions