Im starting a new LAN PC that is based around portability. This new case built by Bitfenix will house essentially the highest end hardware that will fit. The core specs are:
CPU: i7 2600k@3.4 GHz
GPU: EVGA GTX 690 @Stock clocks
Motherboard: ASUS P8Z77-I Deluxe
PSU: Corsair TX750M
Storage: Corsair Force 3 90GB and WD Caviar Black 1TB
Memory: Mushkin 2x4GB Blackline 1600MHz
Case: Bitfenix Prodigy MITX case
Watercooling specs:
Phobya Xtreme 200mm Radiator
Alphacool NexXxoS ST30 Full Copper Slim Profile Dual 120mm Radiator
Swiftech MCP655-B 12v Water Pump
EK D5 X-Res Top 100 Pump Top / Reservoir Combo
XSPC's Acetal Rasa CPU waterblock
2x Ice Dragon Cooling Nanofluid Coolant White Color 32 oz
MX-2 Thermal compound
Tygon Clear 3/4" OD tubing
XSPC black chrome compression fittings
Koolance VID-NX690 GeForce VGA Liquid Cooling Block
I will hopefully be updating this thread as I progress though the build. Expect to see updates in the next week or so.
Any suggestions concerning mods would be greatly appriciated. Hopefully by the end of this I can submit this to MOTM!
Here's a picture of the case:

Edited by explodingorca - 6/1/12 at 9:06pm
CPU: i7 2600k@3.4 GHz
GPU: EVGA GTX 690 @Stock clocks
Motherboard: ASUS P8Z77-I Deluxe
PSU: Corsair TX750M
Storage: Corsair Force 3 90GB and WD Caviar Black 1TB
Memory: Mushkin 2x4GB Blackline 1600MHz
Case: Bitfenix Prodigy MITX case
Watercooling specs:
Phobya Xtreme 200mm Radiator
Alphacool NexXxoS ST30 Full Copper Slim Profile Dual 120mm Radiator
Swiftech MCP655-B 12v Water Pump
EK D5 X-Res Top 100 Pump Top / Reservoir Combo
XSPC's Acetal Rasa CPU waterblock
2x Ice Dragon Cooling Nanofluid Coolant White Color 32 oz
MX-2 Thermal compound
Tygon Clear 3/4" OD tubing
XSPC black chrome compression fittings
Koolance VID-NX690 GeForce VGA Liquid Cooling Block
I will hopefully be updating this thread as I progress though the build. Expect to see updates in the next week or so.
Any suggestions concerning mods would be greatly appriciated. Hopefully by the end of this I can submit this to MOTM!
Here's a picture of the case:

Edited by explodingorca - 6/1/12 at 9:06pm


























