Overclock.net › Forums › Components › Other Peripherals › PC bsoding after i have put ram in slots 1/2
New Posts  All Forums:Forum Nav:

PC bsoding after i have put ram in slots 1/2

post #1 of 6
6/3/12 at 12:41pm
Thread Starter 
So i was planing to upgrade my ram from 8 to 16 gigs next week.I had a problem that my kingsston hyperx wouldn"t fit in slots 1/2 because of my cooler.I improvised,took the cooler off, somehow turned it around and pushed it back a bit and i got few milimiters i needed. Then i installed my ram in slots 1/2 but afer few minutes i had a bsod. I checked temps they where ok so i took my RAM out, cleened slots and contact points with alcohol.It was running for 8 hours and bsoded again.I started it and ran memtest.It crashed in 20 seconds. I took ram out and turned it back into slots 3/4.It"s running stable under memtest now. Are my slots dead? Am i gona need to rma my mbo or what? I got this error when i ran memtest with ram in slots 1/2.I have an asrock 890 gx extreme 3 + phenom 1055t.

http://www.bug.hr/_cache/72f588d87a20477b580baed71a86a42c.jpg?rand=980388292
My System
(16 items)
  		  
CPUMotherboardGraphicsRAM
amd phenom x6 1055t (3.8ghz OC) - 1.5v asrock 890gx extreme 3 Gigabyte gtx660ti OC Kingston HyperX 4x4gb 
Hard DriveHard DriveOptical DriveCooling
Kingston hyperx 120gb Western digital caviar green 2TB somewhere in the basement Zalman 
OSMonitorKeyboardPower
Windows 8 Enterprise 64-bit Dell u2412m primary , u2311h secondary ducky dk 9008 shine 2 corsair tx650w 
CaseMouseMouse PadAudio
Fractal design define r4 (titanium grey) Hp razer gholiatus fragged AKG k512 mk2 
View all
  hide details  
Reply
My System
(16 items)
  		  
CPUMotherboardGraphicsRAM
amd phenom x6 1055t (3.8ghz OC) - 1.5v asrock 890gx extreme 3 Gigabyte gtx660ti OC Kingston HyperX 4x4gb 
Hard DriveHard DriveOptical DriveCooling
Kingston hyperx 120gb Western digital caviar green 2TB somewhere in the basement Zalman 
OSMonitorKeyboardPower
Windows 8 Enterprise 64-bit Dell u2412m primary , u2311h secondary ducky dk 9008 shine 2 corsair tx650w 
CaseMouseMouse PadAudio
Fractal design define r4 (titanium grey) Hp razer gholiatus fragged AKG k512 mk2 
View all
  hide details  
Reply
post #2 of 6
6/3/12 at 7:53pm
It could be slots but I also noticed that your system is OC'd. This little added stress the the memory controller might cause your OC to become unstable. I would actually recommend going back to stock settings and ensuring the memory timings and voltages are correct first, then moving on to the OC if you're stable after doing that with all sticks installed.
Reply
Reply
post #3 of 6
6/4/12 at 12:37am
Thread Starter 
well i did some searching, in ASRocks manuall it"s written that if i"m using 1600mhz memory it"s recommended to put it in white slots,not blue. And yeah it works in white slots,not blue. But what happens when i have 4 stick of memory and fill up everything ? I have sent an email to asrock, i hope that in worst case scenario i"ll have to downclock my memory to 1333
My System
(16 items)
  		  
CPUMotherboardGraphicsRAM
amd phenom x6 1055t (3.8ghz OC) - 1.5v asrock 890gx extreme 3 Gigabyte gtx660ti OC Kingston HyperX 4x4gb 
Hard DriveHard DriveOptical DriveCooling
Kingston hyperx 120gb Western digital caviar green 2TB somewhere in the basement Zalman 
OSMonitorKeyboardPower
Windows 8 Enterprise 64-bit Dell u2412m primary , u2311h secondary ducky dk 9008 shine 2 corsair tx650w 
CaseMouseMouse PadAudio
Fractal design define r4 (titanium grey) Hp razer gholiatus fragged AKG k512 mk2 
View all
  hide details  
Reply
My System
(16 items)
  		  
CPUMotherboardGraphicsRAM
amd phenom x6 1055t (3.8ghz OC) - 1.5v asrock 890gx extreme 3 Gigabyte gtx660ti OC Kingston HyperX 4x4gb 
Hard DriveHard DriveOptical DriveCooling
Kingston hyperx 120gb Western digital caviar green 2TB somewhere in the basement Zalman 
OSMonitorKeyboardPower
Windows 8 Enterprise 64-bit Dell u2412m primary , u2311h secondary ducky dk 9008 shine 2 corsair tx650w 
CaseMouseMouse PadAudio
Fractal design define r4 (titanium grey) Hp razer gholiatus fragged AKG k512 mk2 
View all
  hide details  
Reply
post #4 of 6
6/14/12 at 8:14am
Thread Starter 
So after i tought it was stable at 1600mhz at blue slots i had a bsod yesterday. Even after putting everything back to defaults it bsoded after 15 minutes of memtest running. This board really pisses me off, i don"t understand what"s wrong. It runs fine when memory is in white slots.
My System
(16 items)
  		  
CPUMotherboardGraphicsRAM
amd phenom x6 1055t (3.8ghz OC) - 1.5v asrock 890gx extreme 3 Gigabyte gtx660ti OC Kingston HyperX 4x4gb 
Hard DriveHard DriveOptical DriveCooling
Kingston hyperx 120gb Western digital caviar green 2TB somewhere in the basement Zalman 
OSMonitorKeyboardPower
Windows 8 Enterprise 64-bit Dell u2412m primary , u2311h secondary ducky dk 9008 shine 2 corsair tx650w 
CaseMouseMouse PadAudio
Fractal design define r4 (titanium grey) Hp razer gholiatus fragged AKG k512 mk2 
View all
  hide details  
Reply
My System
(16 items)
  		  
CPUMotherboardGraphicsRAM
amd phenom x6 1055t (3.8ghz OC) - 1.5v asrock 890gx extreme 3 Gigabyte gtx660ti OC Kingston HyperX 4x4gb 
Hard DriveHard DriveOptical DriveCooling
Kingston hyperx 120gb Western digital caviar green 2TB somewhere in the basement Zalman 
OSMonitorKeyboardPower
Windows 8 Enterprise 64-bit Dell u2412m primary , u2311h secondary ducky dk 9008 shine 2 corsair tx650w 
CaseMouseMouse PadAudio
Fractal design define r4 (titanium grey) Hp razer gholiatus fragged AKG k512 mk2 
View all
  hide details  
Reply
post #5 of 6
6/14/12 at 4:46pm
So the system runs fine when you have two sticks in the white slots, but if you put all four sticks in, you BSOD / memtest fails at 1600? You may need to up the DRAM voltage a little bit.
Reply
Reply
post #6 of 6
6/15/12 at 5:13am
Thread Starter 
No, if i put 2 sticks in blue slots it crashes, i put them into white, it works fine. I have solved the problem btw. My firend that is working in a service told be that he is familiar with the problem and that all ASRock boards from 7xx ,8xx series won"t run over 1333mhz in blue slots. I"ll have to run my mem at 1333 but i will turn down timings a bit. Also i"m going to get ma other 2x4GB today so i"ll have 4x4 smile.gif
My System
(16 items)
  		  
CPUMotherboardGraphicsRAM
amd phenom x6 1055t (3.8ghz OC) - 1.5v asrock 890gx extreme 3 Gigabyte gtx660ti OC Kingston HyperX 4x4gb 
Hard DriveHard DriveOptical DriveCooling
Kingston hyperx 120gb Western digital caviar green 2TB somewhere in the basement Zalman 
OSMonitorKeyboardPower
Windows 8 Enterprise 64-bit Dell u2412m primary , u2311h secondary ducky dk 9008 shine 2 corsair tx650w 
CaseMouseMouse PadAudio
Fractal design define r4 (titanium grey) Hp razer gholiatus fragged AKG k512 mk2 
View all
  hide details  
Reply
My System
(16 items)
  		  
CPUMotherboardGraphicsRAM
amd phenom x6 1055t (3.8ghz OC) - 1.5v asrock 890gx extreme 3 Gigabyte gtx660ti OC Kingston HyperX 4x4gb 
Hard DriveHard DriveOptical DriveCooling
Kingston hyperx 120gb Western digital caviar green 2TB somewhere in the basement Zalman 
OSMonitorKeyboardPower
Windows 8 Enterprise 64-bit Dell u2412m primary , u2311h secondary ducky dk 9008 shine 2 corsair tx650w 
CaseMouseMouse PadAudio
Fractal design define r4 (titanium grey) Hp razer gholiatus fragged AKG k512 mk2 
View all
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Other Peripherals
Overclock.net › Forums › Components › Other Peripherals › PC bsoding after i have put ram in slots 1/2