Overclock.net › Forums › Components › Memory › OCN RAM Addict Club-Gallery
New Posts  All Forums:Forum Nav:

OCN RAM Addict Club-Gallery - Page 99

post #981 of 8074
Quote:
are you guys setting your tertairy in bios or os????

also what is most memory intensive 3d benchmark, i dont have the patience for superpi 32m I dont even run that one. Been using lobby any other suggestions. Or even a way to look for 3d stable clocks while im on air.

Bios. I'm not sure, but I think nowadays it's safe to change settings using software. However for me, the bios has access to way more timings than software does. Just depends on your board.

I really like maxmemm (get hwbot's version) the most. Very fast, very comprehensive, everyone has it, easy to compare results. For stability testing I do 24+ hours of custom blend prime95 though. I don't get why people use superpi at all though, hyperpi is the same thing but better basically. superpi is made for single core cpus.... For quick testing though, just the first X minutes of that 24 hour test is enough. I mean 5 minutes of prime95 custom blend is more stressful than 5 minutes of anything else.

Ivan how did you break your motherboard. How do you break so much stuff? Which did you like better, your asus or gigabyte?
Build In Progress
(17 items)
 
   
CPUMotherboardGraphicsRAM
Haswell i7-4770K 4.8GHz@1.452v/1.97vRIN Gigabyte Z87X-UD3H Older Gigabyte 7950 (H60 Mod) 2x4GB Gskill 2400CL11 Hynix CFRs 
Hard DriveCoolingOSMonitor
Samsung 830 128gb Corsair H110 w/4x 140mm Yate Loon High Blues W7 x64 Ultimate Yarrgh Matey Dell U2312HM Matte IPS 1080p 
MonitorMonitorKeyboardPower
Sanyo DP19640 18.5" 768p KDS Rad-7xp 1024p CM Storm Quickfire Rapids Brown Rosewill Capstone 750 
CaseMouseMouse PadAudio
Bitfenix Shinobi Modded CM Storm Spawn Steelseries Diablo 3 2 set CD Speaker + Big Sub 
Other
Bitfenix Recon Fan Controller Moded 
CPUMotherboardGraphicsRAM
Delidded i7-3770K 5GHz@1.499 Gigabyte Z77X-UD5H 1.1 Sapphire Dual-X 7950 3L Boost 4x2GB Mushkin Ridgeback 2200mhz 8/11/8/27 1.75v... 
Hard DriveCoolingCoolingCooling
Intel X25-M 80GB SSD NH-D14 SE2011 Noctua 120/140/140 Fans 3 x Yate Loon Mediums (Petras) 2 x NZXT Havik 140mm Fans 
OSMonitorMonitorKeyboard
Hax'd W7 Ultimate 64-bit Sanyo DP19640 19'' KDS Radius Rad-7xp 17'' Ducky 1087 MX Brown 10keyless 
PowerCaseMouseMouse Pad
Rosewill Capstone 550w Modular NZXT Source 210 w/Modded Window Razer Deathadder 3.5G Steelseries Blizzcon D3 
AudioAudioOtherOther
Phillips FW-C250 2 Speaker Set w/3 CD Changer JBL Sub 6 Subwoofer NZXT Sleeved LED Strip 1m Blue NZXT Sentry 2 Fan Controller 
Other
Colonial Blue Paracord Sleeving 
CPUMotherboardGraphicsRAM
Phenom ii X4 955C2, $31, 5 broken pins, works! ... Biostar A770e3 6.3 Red&Black MSI GTX 460 768mb Twin Frozr II 2 x 2GB Kingston HyperX 1333 OC to 1348CL7@1.65v 
Hard DriveCoolingCoolingCooling
Intel X25-M G2 80GB SSD NH-D14 SE2011 6 x Case Fans (4 x YL-M, NZXT case fan, CM Hype... Jerryrigged Chipset-Northbridge 80mm HSF 
CoolingOSMonitorKeyboard
Jerryrigged VRM Heatsink (sawed off stock AM2 h... Hax'd W7 Ultimate 64bit Sanyo DP19640 19"1360x768 Ducky Cherry Browns 10keyless 
PowerCaseMouseMouse Pad
Antec Earthwatts 430D NZXT Gamma Steelseries Kinzu Optical Steelseries Blizzcon Diablo 3 
  hide details  
Reply
Build In Progress
(17 items)
 
   
CPUMotherboardGraphicsRAM
Haswell i7-4770K 4.8GHz@1.452v/1.97vRIN Gigabyte Z87X-UD3H Older Gigabyte 7950 (H60 Mod) 2x4GB Gskill 2400CL11 Hynix CFRs 
Hard DriveCoolingOSMonitor
Samsung 830 128gb Corsair H110 w/4x 140mm Yate Loon High Blues W7 x64 Ultimate Yarrgh Matey Dell U2312HM Matte IPS 1080p 
MonitorMonitorKeyboardPower
Sanyo DP19640 18.5" 768p KDS Rad-7xp 1024p CM Storm Quickfire Rapids Brown Rosewill Capstone 750 
CaseMouseMouse PadAudio
Bitfenix Shinobi Modded CM Storm Spawn Steelseries Diablo 3 2 set CD Speaker + Big Sub 
Other
Bitfenix Recon Fan Controller Moded 
CPUMotherboardGraphicsRAM
Delidded i7-3770K 5GHz@1.499 Gigabyte Z77X-UD5H 1.1 Sapphire Dual-X 7950 3L Boost 4x2GB Mushkin Ridgeback 2200mhz 8/11/8/27 1.75v... 
Hard DriveCoolingCoolingCooling
Intel X25-M 80GB SSD NH-D14 SE2011 Noctua 120/140/140 Fans 3 x Yate Loon Mediums (Petras) 2 x NZXT Havik 140mm Fans 
OSMonitorMonitorKeyboard
Hax'd W7 Ultimate 64-bit Sanyo DP19640 19'' KDS Radius Rad-7xp 17'' Ducky 1087 MX Brown 10keyless 
PowerCaseMouseMouse Pad
Rosewill Capstone 550w Modular NZXT Source 210 w/Modded Window Razer Deathadder 3.5G Steelseries Blizzcon D3 
AudioAudioOtherOther
Phillips FW-C250 2 Speaker Set w/3 CD Changer JBL Sub 6 Subwoofer NZXT Sleeved LED Strip 1m Blue NZXT Sentry 2 Fan Controller 
Other
Colonial Blue Paracord Sleeving 
CPUMotherboardGraphicsRAM
Phenom ii X4 955C2, $31, 5 broken pins, works! ... Biostar A770e3 6.3 Red&Black MSI GTX 460 768mb Twin Frozr II 2 x 2GB Kingston HyperX 1333 OC to 1348CL7@1.65v 
Hard DriveCoolingCoolingCooling
Intel X25-M G2 80GB SSD NH-D14 SE2011 6 x Case Fans (4 x YL-M, NZXT case fan, CM Hype... Jerryrigged Chipset-Northbridge 80mm HSF 
CoolingOSMonitorKeyboard
Jerryrigged VRM Heatsink (sawed off stock AM2 h... Hax'd W7 Ultimate 64bit Sanyo DP19640 19"1360x768 Ducky Cherry Browns 10keyless 
PowerCaseMouseMouse Pad
Antec Earthwatts 430D NZXT Gamma Steelseries Kinzu Optical Steelseries Blizzcon Diablo 3 
  hide details  
Reply
post #982 of 8074
Quote:
Originally Posted by Belial View Post

Bios. I'm not sure, but I think nowadays it's safe to change settings using software. However for me, the bios has access to way more timings than software does. Just depends on your board.

I really like maxmemm (get hwbot's version) the most. Very fast, very comprehensive, everyone has it, easy to compare results. For stability testing I do 24+ hours of custom blend prime95 though. I don't get why people use superpi at all though, hyperpi is the same thing but better basically. superpi is made for single core cpus.... For quick testing though, just the first X minutes of that 24 hour test is enough. I mean 5 minutes of prime95 custom blend is more stressful than 5 minutes of anything else.

Ivan how did you break your motherboard. How do you break so much stuff? Which did you like better, your asus or gigabyte?

If you didn't notice almost all of the guys posting in this thread are hardcore benchers (and most are from Xs or other forums like ocx or ocf). We care for superpi 32m stability and efficiency cause it's one of the few hwbot benchmarks that are affected heavily by ram performance.

As for the board, it bsod while folding and died....it was the 8400gs I had as vga output that died and toook the board with it.

On wednesday I'll go to the post office to rma it...and I prefer the mvg over th ud5h I had.
post #983 of 8074
Quote:
Originally Posted by reggiesanchez View Post

are you guys setting your tertairy in bios or os????

also what is most memory intensive 3d benchmark, i dont have the patience for superpi 32m I dont even run that one. Been using lobby any other suggestions. Or even a way to look for 3d stable clocks while im on air.

is there a program that I can use to change or at least see all timings on evga board

set tertiary timings in BIOS..

 

 As for 3D memory testing.. i would say Vantage CPU or 3D'11 CT .. you can see memory gains in both tests as you cut latency and increase bandwidth. Both are pretty tough for stability too..

post #984 of 8074
IN! Awesome thread here with some familiar and new faces smile.gif

have some new stuff to try
2x2 2133 trident bbse
4x2 2000 9-9-9 PI psc
2x2 2000 9-9-9 Rips psc (my best stick ever was from the same model)
4x2 2000 9-10-9 Dom GT
3x2 2000 9-9-9 CSX Diablo D9GTR (just for fun never had any and always wanted to try it)

As far as binning I no longer try low voltage. Had too many sticks that wont run over a certain voltage which makes it useless to bench them cold. thumb.gif
post #985 of 8074
^Sprave!

so nice to see you in here buddy.

I feel the same way about lovo binning as I have had so many nice kits that require low volts and then hard wall at a certain voltage making them useless when cold at higher clocks.
post #986 of 8074
tested the first set of 2300 c8's and they seem pretty good, 1.84v



And here is an untested set of the 2133 c9 Ballistix. just set 1.89v as 1.84v failed after two loops

no waza


waza
post #987 of 8074
Awesome kits there L0ud:thumb:

Got this psc black pcb, probably the last batch of Trident 2000C9 before early RipjawsX / Sandy released



Uploaded with ImageShack.us


Quick run



Uploaded with ImageShack.us
Edited by centvalny - 4/1/13 at 9:50pm
post #988 of 8074
^ What voltage? And I thought the third timing was supposed to be same as cas latency? Is that a bench or for a 24/7 overclock?
Build In Progress
(17 items)
 
   
CPUMotherboardGraphicsRAM
Haswell i7-4770K 4.8GHz@1.452v/1.97vRIN Gigabyte Z87X-UD3H Older Gigabyte 7950 (H60 Mod) 2x4GB Gskill 2400CL11 Hynix CFRs 
Hard DriveCoolingOSMonitor
Samsung 830 128gb Corsair H110 w/4x 140mm Yate Loon High Blues W7 x64 Ultimate Yarrgh Matey Dell U2312HM Matte IPS 1080p 
MonitorMonitorKeyboardPower
Sanyo DP19640 18.5" 768p KDS Rad-7xp 1024p CM Storm Quickfire Rapids Brown Rosewill Capstone 750 
CaseMouseMouse PadAudio
Bitfenix Shinobi Modded CM Storm Spawn Steelseries Diablo 3 2 set CD Speaker + Big Sub 
Other
Bitfenix Recon Fan Controller Moded 
CPUMotherboardGraphicsRAM
Delidded i7-3770K 5GHz@1.499 Gigabyte Z77X-UD5H 1.1 Sapphire Dual-X 7950 3L Boost 4x2GB Mushkin Ridgeback 2200mhz 8/11/8/27 1.75v... 
Hard DriveCoolingCoolingCooling
Intel X25-M 80GB SSD NH-D14 SE2011 Noctua 120/140/140 Fans 3 x Yate Loon Mediums (Petras) 2 x NZXT Havik 140mm Fans 
OSMonitorMonitorKeyboard
Hax'd W7 Ultimate 64-bit Sanyo DP19640 19'' KDS Radius Rad-7xp 17'' Ducky 1087 MX Brown 10keyless 
PowerCaseMouseMouse Pad
Rosewill Capstone 550w Modular NZXT Source 210 w/Modded Window Razer Deathadder 3.5G Steelseries Blizzcon D3 
AudioAudioOtherOther
Phillips FW-C250 2 Speaker Set w/3 CD Changer JBL Sub 6 Subwoofer NZXT Sleeved LED Strip 1m Blue NZXT Sentry 2 Fan Controller 
Other
Colonial Blue Paracord Sleeving 
CPUMotherboardGraphicsRAM
Phenom ii X4 955C2, $31, 5 broken pins, works! ... Biostar A770e3 6.3 Red&Black MSI GTX 460 768mb Twin Frozr II 2 x 2GB Kingston HyperX 1333 OC to 1348CL7@1.65v 
Hard DriveCoolingCoolingCooling
Intel X25-M G2 80GB SSD NH-D14 SE2011 6 x Case Fans (4 x YL-M, NZXT case fan, CM Hype... Jerryrigged Chipset-Northbridge 80mm HSF 
CoolingOSMonitorKeyboard
Jerryrigged VRM Heatsink (sawed off stock AM2 h... Hax'd W7 Ultimate 64bit Sanyo DP19640 19"1360x768 Ducky Cherry Browns 10keyless 
PowerCaseMouseMouse Pad
Antec Earthwatts 430D NZXT Gamma Steelseries Kinzu Optical Steelseries Blizzcon Diablo 3 
  hide details  
Reply
Build In Progress
(17 items)
 
   
CPUMotherboardGraphicsRAM
Haswell i7-4770K 4.8GHz@1.452v/1.97vRIN Gigabyte Z87X-UD3H Older Gigabyte 7950 (H60 Mod) 2x4GB Gskill 2400CL11 Hynix CFRs 
Hard DriveCoolingOSMonitor
Samsung 830 128gb Corsair H110 w/4x 140mm Yate Loon High Blues W7 x64 Ultimate Yarrgh Matey Dell U2312HM Matte IPS 1080p 
MonitorMonitorKeyboardPower
Sanyo DP19640 18.5" 768p KDS Rad-7xp 1024p CM Storm Quickfire Rapids Brown Rosewill Capstone 750 
CaseMouseMouse PadAudio
Bitfenix Shinobi Modded CM Storm Spawn Steelseries Diablo 3 2 set CD Speaker + Big Sub 
Other
Bitfenix Recon Fan Controller Moded 
CPUMotherboardGraphicsRAM
Delidded i7-3770K 5GHz@1.499 Gigabyte Z77X-UD5H 1.1 Sapphire Dual-X 7950 3L Boost 4x2GB Mushkin Ridgeback 2200mhz 8/11/8/27 1.75v... 
Hard DriveCoolingCoolingCooling
Intel X25-M 80GB SSD NH-D14 SE2011 Noctua 120/140/140 Fans 3 x Yate Loon Mediums (Petras) 2 x NZXT Havik 140mm Fans 
OSMonitorMonitorKeyboard
Hax'd W7 Ultimate 64-bit Sanyo DP19640 19'' KDS Radius Rad-7xp 17'' Ducky 1087 MX Brown 10keyless 
PowerCaseMouseMouse Pad
Rosewill Capstone 550w Modular NZXT Source 210 w/Modded Window Razer Deathadder 3.5G Steelseries Blizzcon D3 
AudioAudioOtherOther
Phillips FW-C250 2 Speaker Set w/3 CD Changer JBL Sub 6 Subwoofer NZXT Sleeved LED Strip 1m Blue NZXT Sentry 2 Fan Controller 
Other
Colonial Blue Paracord Sleeving 
CPUMotherboardGraphicsRAM
Phenom ii X4 955C2, $31, 5 broken pins, works! ... Biostar A770e3 6.3 Red&Black MSI GTX 460 768mb Twin Frozr II 2 x 2GB Kingston HyperX 1333 OC to 1348CL7@1.65v 
Hard DriveCoolingCoolingCooling
Intel X25-M G2 80GB SSD NH-D14 SE2011 6 x Case Fans (4 x YL-M, NZXT case fan, CM Hype... Jerryrigged Chipset-Northbridge 80mm HSF 
CoolingOSMonitorKeyboard
Jerryrigged VRM Heatsink (sawed off stock AM2 h... Hax'd W7 Ultimate 64bit Sanyo DP19640 19"1360x768 Ducky Cherry Browns 10keyless 
PowerCaseMouseMouse Pad
Antec Earthwatts 430D NZXT Gamma Steelseries Kinzu Optical Steelseries Blizzcon Diablo 3 
  hide details  
Reply
post #989 of 8074
Quote:
Originally Posted by Belial View Post

^ What voltage? And I thought the third timing was supposed to be same as cas latency? Is that a bench or for a 24/7 overclock?

Bench stable I assume, at least mine are(screens)biggrin.gif
post #990 of 8074
Quote:
Originally Posted by Belial View Post

^ What voltage? And I thought the third timing was supposed to be same as cas latency? Is that a bench or for a 24/7 overclock?

It's not set in stone, it tends to be the same, but if it works tighter better yet. tongue.gif
The whole point of ram bandwidth is 2d benching normally, though it helps in every other type of bench too.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Memory
Overclock.net › Forums › Components › Memory › OCN RAM Addict Club-Gallery