You will probably have to strip the PC down to it's component parts, to get the cooler on, if you aren't fairly confident to do it right, then don' start !
IMHO
dunx
P.S. Just about everything you need to understand could be found on Youtube somewhere...
IMHO
dunx
P.S. Just about everything you need to understand could be found on Youtube somewhere...
















. The reason for a lint free cloth is that it wont leave fluff or dust from the cloth behind which could interfere with it's cooling effectiveness. Alcohol or a TIM(Thermal Interface Material) clean kit is a must but you could probably get away with the cotton bud. You will need to remove your board from the case to install that backplate for your socket 1366

