Overclock.net banner

Help with on board graphics on Intel Z77?

562 views 5 replies 2 participants last post by  BradleyW 
#1 ·
When i run parted magic to secure erease my GPU's, it asks me to go into sleep mode.
When i sleep, then hit the ESC key, the system boots but i get no image. I then have to try and connect which ever way i can, using any form of cable i can. When i do get an image, it is very blurry and all over the place with lines and....well....it is unreadable.

How can i prevent this?
Thank you.
 
#3 ·
#4 ·
If i connect them to the 7970's, I still get no image so i just try onboard and vice versa. Not much luck.
Is it possible to boot up with the SSD's unplugged, then load into parted magic, then connect the SSD's and secure erease them thus avoiding sleep?
 
#5 ·
Quote:
Originally Posted by BradleyW View Post

If i connect them to the 7970's, I still get no image so i just try onboard and vice versa. Not much luck.
Is it possible to boot up with the SSD's unplugged, then load into parted magic, then connect the SSD's and secure erease them thus avoiding sleep?
yes, just enable hot swapping/plugging.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top