Overclock.net › Forums › Intel › Intel CPUs › help me with oc problem please
New Posts  All Forums:Forum Nav:

help me with oc problem please

post #1 of 7
Thread Starter 
i have a problem with my new system.. last night i decided to do some overclocking and i changed ram setting to 1:1 and fsb is now up to 370 didnt touch volts or anything else.. and everything seems to work fine except after i started messing around with those setting my x-fi card after rebbot will try to install again.. only sometimes though and if i reboot without installing, it works again until i rebooted a few times then it will ask again.. its sooo strange?

Intel Core 2 Duo E6600 - zalman 9500 cooler
Asus Radeon X1900 XT - 256 MB
GIGABYTE 965P-DS3
OCZ Enhanced Latency Gold Gamer 2x512mb
X-fi extreme gamer
SilverStone Zeus series ST52F 520w
post #2 of 7
Thread Starter 
i have already tried removing drivers and install them again.. but it didnt help.
post #3 of 7
Did you make sure your PCI bus was locked before overclocking ? This may be the issue.
post #4 of 7
Thread Starter 
no i didnt.. where can i see that? as u maybe have figured by now im a noob as far as oc go
post #5 of 7
Thread Starter 
pci frequency is set to auto.. is that it? seems like its the only pci command in bios.. btw im running f7 bios if that makes any diffrence..
post #6 of 7
Thread Starter 
i just tried searching some and as far as i could tell the pci is locked at 33mhz on this board.. so only thing i can chance is pci express frequency wich is set to auto..?
post #7 of 7
Thread Starter 
i just tried another pci slot and set everything back to stock.. then i didnt have any problems.. then i set ram to 1:1 pci-express to 100 and fsb to 300 and it started to ask to install soundcard again?
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › help me with oc problem please