Out of Space
Hey all,
I have wanted to do an itx rig for a while now and Bitfenix have come through with a great case.
It will be mainly used as a gaming rig, single screen pushing some nice numbers.
Here is a short list of parts (i will update it as i decide on the rest of the rig) :-
Main Parts
Case:-
Motherboard:-
CPU:-
GPU:-
Memory:-
PSU:-
Boot Drive:-
Watercooling Parts
Radiators:-
Water Blocks:-
Fans:-
Pump:-
Pump Top:-
Reservoir:-
Tubing:-
Fittings:-
I have already got some alphacool fittings. I will have to wait until i have the case to decide on the rest of them, it is going to be tight!!!
anyway feel free to comment, i will be updating the first post when i have the parts ordered/decided upon and a bit of formatting aswell!
Edited by dizzledon - 11/10/12 at 12:19pm
Hey all,
I have wanted to do an itx rig for a while now and Bitfenix have come through with a great case.
It will be mainly used as a gaming rig, single screen pushing some nice numbers.
Here is a short list of parts (i will update it as i decide on the rest of the rig) :-
Main Parts
Case:-
- Bitfenix Prodigy Arctic White
Motherboard:-
- ASUS H77 M-ITX
CPU:-
- I5 3570K
GPU:-
- EVGA GeForce GTX 670 2048MB GDDR5
Memory:-
- Patriot Viper Xtreme 8GB (2x4GB) DDR3 PC3-12800C8 1600MHz
PSU:-
- Corsair HX 650W ATX Modular
Boot Drive:-
- Samsung 256GB SSD 830
Watercooling Parts
Radiators:-
- 2x Alphacool NexXxoS ST30 240mm Dual Radiator : Full Copper
Water Blocks:-
- EK Supremacy CSQ Universal CPU Waterblock : Copper Acetal
- EK FC670 GTX CSQ Full Cover Waterblock : Copper Acetal
Fans:-
- Scythe Gentle Typhoon 120mm 1450 RPM x4
Pump:-
- Alphacool VPP655 single edition
Pump Top:-
- Koolance COV-RP450
Reservoir:-
- Koolance TNK-CNT50T70
- Koolance BDY-TK120X70
- Koolance COV-TKTOPX70
Tubing:-
- XSPC 3/8" ID - 5/8" OD (10-16mm) High Flex Tubing : Black
Fittings:-
- Alphacool Copper
I have already got some alphacool fittings. I will have to wait until i have the case to decide on the rest of them, it is going to be tight!!!
anyway feel free to comment, i will be updating the first post when i have the parts ordered/decided upon and a bit of formatting aswell!
Edited by dizzledon - 11/10/12 at 12:19pm



























