Originally Posted by Wildcard36qs
Here are my current settings (I'd take screenshot but it is not detecting my USB):
Turbo Ratio: By All Cores (set to 45)
PLL Overvoltage: Auto
EPU Power Saving: Disabled
CPU Offset Voltage is AUTO LOL (I thought I had manually set this, but obviously it is working out OK)
VCCIO Voltage is Auto
PCH Voltage Auto
Load-Line Calibration is Auto
CU Spread Spectrum is EnabledOh BTW
I have read that for offset overclocking, you should DISABLE
C3,C6 states. Although they are enabled with my above overclock and I have no issues.
Ok I have everything the same as you there except the folloing:
- my offset voltage does not have an auto option.
- My Load Line Callibration was set to enabled and so I've changed it to auto.
- I can't find my EPU power saving option
I'll just keep lowering the voltage until I bsod I think. Did you go higher than 4.5 yet? Let me know what happens