Overclock.net › Forums › Case Mods & Cases › Computer Cases › ZALMAN Z11 CLUB
New Posts  All Forums:Forum Nav:

ZALMAN Z11 CLUB - Page 17

post #161 of 1124
ive seen them on the side where the rear fan is.....people even modded the fins on top and had double rads there (outside) in your dvd bay (with the right bracket)......where theres space basically
post #162 of 1124
Quote:
Originally Posted by d1nky View Post

ive seen them on the side where the rear fan is.....people even modded the fins on top and had double rads there (outside) in your dvd bay (with the right bracket)......where theres space basically

you dont need a bracket to mount a 120mm fan in the 5.25" bays, the plates that are in there have slots cut at exactly the right spacing for you to be able to screw through.

post #163 of 1124
Photo0037.jpg

I got a fan bracket mounted half way through the bay so the fan is closer to the heatsink, but if you was to mount a h80i it would be difficult on the plates, also I ripped them plates off so.... but yea either would work
post #164 of 1124
I just feel like I'm missing out with the fan options in this case since I have the H80i mounted on the back with as an intake on for the rad. The only fan I have as an exhaust is the top one closest to the driver bays. I am considering taking out the harddrive rack in the bottom to hopefully fit another fan in there.


I'll gladly take any advice. Don't mind the cables. I'm deciding on a new PSU before I sleeve everything.
post #165 of 1124
Quote:
Originally Posted by Gardnerphotos View Post

you dont need a bracket to mount a 120mm fan in the 5.25" bays, the plates that are in there have slots cut at exactly the right spacing for you to be able to screw through.


Which screws did you use for that? ive tried all the screws which came with the case but none of them are tight enough...they just go straight through?

ATM ive got a Zalman 120mm silent case fan behind the 5.25 drive bays atm http://www.amazon.co.uk/gp/product/B000FZ33AE/ref=wms_ohs_product?ie=UTF8&psc=1 - ive put it up using cable ties but is it possible to replace the 120mm with a 140mm one there?
post #166 of 1124
Quote:
Originally Posted by Gardnerphotos View Post

you dont need a bracket to mount a 120mm fan in the 5.25" bays, the plates that are in there have slots cut at exactly the right spacing for you to be able to screw through.


Is this the only way to attach a 120mm fan in the 5.25" bays? It looks like those slats block a lot of airflow
post #167 of 1124
You can remove those brackets easily - you can just push/screw them out of place
post #168 of 1124
Quote:
Originally Posted by xMATHARUx View Post

Which screws did you use for that? ive tried all the screws which came with the case but none of them are tight enough...they just go straight through?

ATM ive got a Zalman 120mm silent case fan behind the 5.25 drive bays atm http://www.amazon.co.uk/gp/product/B000FZ33AE/ref=wms_ohs_product?ie=UTF8&psc=1 - ive put it up using cable ties but is it possible to replace the 120mm with a 140mm one there?

I used vibration reduction mountings (the rubber pin things) I dont know about removing the bays
post #169 of 1124
Are you talking about one of those anti vibration rubber screws u get with some zalman fans?
post #170 of 1124
New here and just resently purchase this case yesterday but b4 I open the box I wanted to ask a question. Sorry if it has been ask already, I looked but didnt find nothing.

I was kinda in a hurry so buying this box went unsearched, but b4 I bought it, I noticed that they had " Z11 Plus" and "Z11 Plus HF1" One being Blue and The other Red. So i ask the guy, whats the difference besides color about these two modals being that there's a $20 price difference here.

He told me it was because of the color......

Seriously, I thought.... there's got to be a bigger difference than just Color, Fans dont cost that much. So my question is???? What is the difference between these two cases so i know if I want to keep the Z11 Plus, or take it back and get the other case? Thanks and again, Im apology if this was answered already.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Computer Cases
Overclock.net › Forums › Case Mods & Cases › Computer Cases › ZALMAN Z11 CLUB