Well I have recently set my vcore at offset (instead of the manual) it works well.
However, there is a pinch. I have set C3 & C6 on disable (which I heard thats you should if you use the offset voltage)
But when I have set them on the disable the "clock village core" funktion is not working.
In bios I have set 4 core/4.6ghz, 3 core/4.7ghz, 2 core/4.8ghz, 1 core/4.8ghz.
But once inside windows its only 4.6ghz.
If I Set C3 & C6 on auto / enable, it works perfect: 4.6/4.7/4.8/4.8ghz in windows.
Someone here who can come up with tips / info / suggestions on how I can do?













CPU uses around 5-10W on idle (leaning towards 5) when it downclocks to 1.6GHz and kicks back up to 4.5GHz when needed without any hesitation.


I'm on the latest BIOS revision too (updated it prior to the CPU)